Result: Step Support

Do the sensors need to be activated in some way, and if so, is it possible my installer missed this step? Should I remove the rims from the wheels before trying to pair the sensors? | Had the internal sensors installed at a...

I included a cutout of the instructions showing these steps and a video review of the # TST-507-RV-6-C for you to take a look at. | We are not getting reading on our TST tire pressure monitor. We may need to...

To pair the sensors in your TST TPMS for RVs # TST-507-RV-6-C you'll need to complete the following steps: You'll want to only have one sensor by the monitor at a time (place the others a few feet away) Press and hold the set button on monitor until it beeps Press the + or - buttons until you see Learn ID and then press the set button Highlight the desired wheel position by pressing the + or - button Once at the desired position press set and you'll see all F's on the monitor Hold sensor to bottom of monitor and press the Go button and you'll see the code change and then press set to confirm |

From the measurements and descriptions you have for your RV, I do suggest going with these. The TST TPMS for RVs # TST-507-FT-6-C is also highly recommended. | I plan to purchase a new TPMS but first what...

You've done most of the troubleshooting steps I would recommend already but have you tried using a different air compressor or attachment? | I have the tst5o7 pass through sensors, the older style, when I take the sensor off...