Result:

If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level. | Will this hitch...

I recommend the following: -Roadmaster Direct-Connect Base Plate Kit # RM-523200-5 -Roadmaster Falcon All-Terrain Tow Bar # RM-522 -Roadmaster 64" Single Hook, Straight Safety Cables # RM-645 -Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-15267 -Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes # SM99251 OR -Demco Air Force One Flat Tow Brake System for RVs w/ Air Brakes # SM99243 The brake system depends on whether your RV has hydraulic or air brakes. |

All of the equipment and procedures will be the same as if you were towing the Equinox with an RV. If the RV hitch height is different than the Traverse hitch height you may also need a high/low adapter to keep the tow bar level. |

If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level. |

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry. | We will be towing a 2017 Chevy Traverse with a...

Hello. I have a Class C RV with a Blue Ox Towing System. I am trying to set up my 2017 AWD Chevy Traverse to be flat towed with the Blue Ox system. | Hello. I have a Class C RV with a Blue Ox Towing System. I am trying to set...

The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. | Hi I have a 2014 Chevrolet Traverse...

You will more than likely need a high-low adapter to level the tow bar to your RV so I have included a link to helpful article that goes over how to measure for the correct adapter, and a link to all of our high-low adapters for you to take a look at. |

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry. | I have a 2013 Chevrolet Traverse that we would...

The rest of the parts needed to flat tow your 2021 Chevy Traverse are listed below: Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar item # e74ZR Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-523200-5 Battery Disconnect Switch - Roadmaster Battery Disconnect with Switch for Towed Vehicle item # RM-766 Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

I checked with our vendors and to flat tow your 2023 Chevy Traverse you will need the following parts: Tow Bar and Safety Chains - Blue Ox Alpha 2 Non-Binding Tow Bar item # BX7380 Base Plate Kit - Blue Ox Base Plate Kit - Removable Arms item # BLU33XR without shutters or item # BLU63CR if your Traverse has the lower shutters Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Charge Line - Roadmaster Battery Charge Line Kit for Towed Vehicles item # RM-156-25 Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |

For Adaptive cruise use the Blue Ox Base Plate Kit part # BX1738 Without adaptive cruise use the Blue Ox Base Plate Kit part # BX1734 For the wiring solution I recommend using the Roadmaster # RM-15247, which will allow your tail lights and blinkers to function in sync with your RV's lights. This is for use with an RV that has a 7 way on the rear; if you've got a 4 way then I recommend going with the RM-154. |

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry. | Im looking at the Roadmaster EZ4 base plate kit...

I have a 2013 Chevy traverse LTZ. Bought a motor home which came with a Road master Stering All Terrain tow.What is the correct base plate I need for this vehicle? Also are the base plates hard to install? | For your 2013 Chevy Traverse and...

The controller has 3 boost levels that let you adjust initial braking power and aggressiveness. | Hi I’ll just gonna ask what brake controller will fit for Chevrolet traverse 2018 LT? | When it comes to installing a brake...

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry. | what are the differences in these two products?...

Or can I just use the system ignoring what the RV service people told me? | Hi. I just purchased a travel trailer and it is my very first trailer. I picked a small and light trailer because my towing vehicle is 2015 Chevy Traverse...

I am purchasing a 2020 Traverse to Flat Tow with my RV. Do you all offer help in making sure I have all the correct parts to get it setup? | I am purchasing a 2020 Traverse to Flat Tow with my RV. Do you all offer help in...

It runs complete diagnostics and makes you aware immediately without deciphering codes. It also has 3 levels of boost that lets you adjust the initial braking power and aggressiveness. | I have a 2016 Traverse without tow package...