Parts Needed to Flat Tow 2011 Hyundai Accent behind RV
What products will I need to flat tow a 2011 Hyundai Accent behind an RV? | What products will I need to flat tow a 2011 Hyundai Accent behind an RV? | You would first need to start with a base plate kit for your 2011 Hyundai...
Recommended Hitch for a 2014 Hyundai Accent GS 6 w/ a Manual Transmission
To flat tow your manual transmission 2014 Hyundai Accent GS 6 you will also need the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Crossbar Base Plates item # e64ZR Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Supplemental Braking System - Brake Buddy Select 3 Portable Supplemental Braking System item # HM39524 High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |
Parts Needed to Flat Tow 2014 Hyundai Accent with Manual Transmission
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry. | I want to flat tow my 2014 Hyundai Accent with...
Parts Needed to Flat Tow 2010 Hyundai Accent
This will let you wire your Accent to accept the RV's tail, brake, and turn signal lights for flat towing. | I need a towbar for our 2010 Hyundai accent as I would like to tow this car behind our motorhome do you have such...
Base Plate and Flat Tow Parts for 2014 Hyundai Accent with Manual Transmission
You will need the Brake-Lite Relay in order to prevent your Hyundai's brake signal from overriding the turn signal from your RV when applying the brakes during a turn. It is also likely you will need a high-low adapter such as # RM-048-8 to keep your tow bar level with your tow vehicle. |
Filter Your Search
Contact and Help