Result:

If you were told your trailer was pre-wired, there would be a mounting plate and plug that would allow you to just connect a plug-in camera system. If that mount and plug is not there, I wouldn't assume the wires are there, though you can still install a Voyager camera system and hardwire it with the following: - Voyager WiSight 2.0 Wireless RV Backup Camera System # ASA84YR This is a camera system that you will hardwire, and I have added a link below to a video review for you to check out as well. |

If you want to have the monitor built into the rear view mirror then you could go with a system like the Rear View Safety G-Series Backup Camera System # RVS-776718 instead....

There is a whole range of brake systems depending on what the RV/Motorhome brake system is. | Which tow bar would be uses to readily connect to the part #477-5? I have a 2008 Ford Ranger pickup...

What parts do I need? | If you haven't already the first thing you want to do is make sure your 2000 Ford Ranger can even be flat towed with all 4 wheels down behind a motorhome. From my research the 4-wheel drive model can as long as it's...