Result:

In order to use the Edge monitor in your cab with a rear view camera mounted at the back of your travel trailer, I recommend using the Rear View Safety License Plate Backup Camera part # RVS-778. |

Setting 3 will give you 109 hp and 234 lbs torque. This system is not legal in California. For a dash board mounted backup camera system, I recommend the Hopkins Rear View Camera with Backup Sensors - 2-1/2" LCD, # HM60195VA. |

Hello I have a question on my 05 copper canyon sprinter.I bought this trailer used a few weeks back.In order to get 6 inches between tailgate and rv the nose of the camper is way up in the air.my springs dont seem shot on trailer.But ive noticed the rear trailer tires are rubbing on floor of rv. i believe it was supposed to have 205/75r15 tires from factory and it has 225 on it .If i go back to 205/75 it will help the rubbing situation but make the rv even lower. also my axle is already under the springs.do they make blocks and longer ubolts like for the rear of a truck or a taller center equalizer.I am at a loss as to what to do. |

To get the right system you would only need to know your total tongue weight (TTW), which is the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your tow vehicle. |