1998  x   >   !SportRack  x   >   Mazda  x   >   Subaru  x   >  

Im wondering what the measurements are of this. From end to end..Etcetera thank you | I spoke to my contact at Curt and he sent me a complete dimensional drawing for the Curt Hitch part # C12270 that I attached for you to review. |

do you have this item in black ? | Yes, we do have a black version of the # 328-003-71PE with the part # 328-003-71BE. |

Have a locking surfboard rack for 1998 Subaru Forester? If so I have what looks like factory crossbars- will that fit? | We do have a locking carrier that will work for your surfboard as long as it is not wider than 36 inches. I recommend...

I have a rare naked roof Subaru Legacy 98 complete with the ingenious design to line the windows with brittle plastic to also prevent clincher install. Does Yakima provide any technical specifications for the rails? Whats the weight limit...

Do you have a Replacement Cover for Extang BlackMax Soft Tonneau for a 1998 Mazda B3000 | We do indeed have a replacement cover for the # EX2630 Extang Black Max Soft Tonneau cover for your 1998 Mazda B3000 pickup. The part number is # EX1630. |

Do you have just the installation kit for sale? Screws, bolts, etc. Have hitch, lost parts. | Yes, you will want the part # RHK. Once on the product page you will need to enter the part number (C12270) for the hitch you have and add it to your...

Is there a manufacturer trailer plug somewhere on my 1998 Subaru Legacy Wagon or does the car require hard wiring for trailer connection? My Subaru is not an Outback version. | I recommend using the ZCI Circuit Protected Vehicle Wiring Harness...

Need help fitting a hatch bike carrier to a 1998 Mazda MPV. Im unable to use the hitch as Im towing a trailer. I cant go on top as Im carrying two kayaks. I cant go on the back of the trailer as it cannot sustain the weight. Ive investigated...

Hello. I have a 1998 forrester and am looking for an inexpensive 2 bike rack. I previously bought an allen 102db, but the clips dont fit onto the top of my hatchback. it is a 5 speed if that matters. Thanks so much. | All trunk mount bike...

What base Plate for Tow Bar fits my 1998 Subaru Legacy 2.5 GT wagon? Thanks | For your 1998 Subaru Legacy the Roadmaster Base Plate kit part # 909-3 is a confirmed fit that would work well. In addition to the base plates, you will also need...

Does this hitch work on a 1998 Legacy wagon, Brighton model? | Yes, the Curt Trailer Hitch # C12270 that your referenced will fit your 1998 Brighton model Subaru Legacy wagon. Check out the installation instructions for this product that I attached. This...

I also need to know if it will allow full opening of the hatchback. If there are any accessories that could be useful please mention them to me. I was wondering about effect on gas mileage if you know.Thank you! | The Yakima RocketBox Pro 14,...

Hello, I have a yz250 with a wet weight of 210lbs. I was wondering if this would pair nicely with, Item # C12270, one of the best choices for the 1 1/4inch hitches. Ill be using a vehicle with a 2,500lbs tow capacity, 1998 Subaru Legacy GT....

Hello Will this carrier fit a 1998 Subaru Forester? | the Rhino-Rack Dual Trekker bike rack # RRRBC048 fits 1-1/4 inch and 2 inch trailer hitches so provided that your 1998 Subaru Forester has a trailer hitch this bike rack will fit it. there...

I bought the Curt Class II receiver for my 1998 Subaru Legacy and am looking for the torque specs for the bolts. Thank you | I have attached the instructions for the Curt # C12270, where the torque specs for the hitch hardware is listed. We...

Would this fit on a 1998 Mazda b2500 single cab? | For your 1998 Mazda B2500 6 foot bed the correct Bestop Supertop is the part # B76302. The part # B76304 that you referenced isn't a fit for your truck so I can't recommend it for you. |

Im looking for a 2 inch trailor hitch for my 1998 Suburu Legacy Outback. I have a Thule T2 bike rack that mounts on my truck which has a 2 inch hitch. I want to use the same bike rack if possible on my car. | Since there isn't any 2-inch trailer...

I have a 1998 Subaru Legacy Outback 4WD. I have been unable to locate the connection point despite spending a few hours on it and removing the upper interior trim. As best as I can see, it is neither on the drivers nor the passengers side near...

Which fender mounting bracket is needed for this fender, CE19504-2? Thanks | For the set of CE Smith trailer fenders # CE19504-2 you can use existing brackets on the trailer or, if you need brackets, you can use # CE26098G-2. Drilling will be...

hello there - i am looking for a lock/latch to replace the one on my sixpac 6foot mini combo cab-over camper its from the mid-1990s. i have attached a photo or two. the door has hinges on the left side, can this item - Global Link RV Entry Door...

So I need info on what brackets to get for my truck for my brush gaurd the brush gaurd I have has 2 holes in it and its not quite long enough to just bolt up to my frame on my truck I been searching for the past 3 weeks and cant find a mounting...

What is strongest hitch for 2018 Impreza for towing and accessories | The Draw-Tite Max-Frame Trailer Hitch Receiver # 76209 is a two inch trailer hitch receiver rated for 675 lb tongue weight and up to 4500 lbs towing capacity. There is no...

Hi, I purchased a trailer hitch from you all a few years ago for our 2007 Honda Accord VP and we use it very sparingly. I recently purchased a 1998 Mazda B2500 pickup truck. Is the hitch interchangeable? Thanks, | The hitch that is on your...

I bought this hitch with the understanding it would fit my car. It didnt.have since sold the car. your # on the tag 36284 300 lbs tung with 3500 towing capacity. can you tell what vehicles it would fit? | I'm so sorry to hear that! As far as...