1998  x   >   !Mighty Cord  x   >   !Westlake  x   >   TruRyde  x   >  

I have a trailer with dexter 7k axles. They use the 12x2 brake shoe and drum. Ive never been happy with stopping power when Im more than half loaded. The dexter 8k axle comes with 12x 3 3/8 inch drums and shoes. Is it possible to replace...

I am converting to disc brakes. My spindles currently have zurk fittings in the end of them. The new Titan disc brake package comes with the Kodiak bearing protectors, do I remove the zurk fitting in the end of the spindle when using the bearing...

I need a drum assembly and spindle for this Dexter #23-112. 3500 lbs. Let me know and the part # as well Thanks you | The brake assembly # 23-112 is rated for 6,000 pound axles, not 3,500 pound axles. For a 3,500 pound axle you will need to...

Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2 - Pre-Greased Item # AKIHUB-655-6-K. Can I get 2 of these with the 2 1/8 inch ID grease seal.? Reply and I will contact customer for approval. THX | We don't offer the # AKIHUB-655-6-K...

Could you please give me the correct OD of the bearing LM48548? | The Replacement Trailer Hub Bearing part # LM48548 has an outer diameter of 2.56". |

a grease seal just blew out on my new ez lube axle. to replace it, do I need to take all the bearings out? or, can i just take the hub off and put in a new seal from the back of the hub? Thanks | The bearings for your trailer hub don't need...

looking to buy ?E-Z Lube Grease Caps. not sure if you have the right size? I measured the grease cap on my trailer I get 1.980. | You would want the EZ Lube Drive in Plug with Cap part # RG04-040. This has been confirmed as a fit for trailer...

I have a 1976 Terry Travel Trailer with tandem axles that I am updating/replacing the suspension on. The old shackles were slotted. I ordered the MORryde Suspension Upgrade Kit MR46ZR to replace them since the kit comes with bronze instead of...

is ?TruRyde the only brand of bearings you sell? what is the warranty on them? | TruRyde and Redline are the two brands of bearings that we carry. According to my contact at TruRyde they come with a limited 3 year warranty. |

We are interested to buy your 8 inch hub assembly, we need to know more details, do you have some CAD Drawing, or detailed measurement. such as the hub length and shaft requirement. thanks | The Dexter Hub Assembly, part # 34822545BX is designed...

Can you tell me where I should take the measurements on the spindle to determine what hubs I need.It is a 3500lb trailer axle. I want to replace the 2 hubs. The inner bearing is L68149 and the outer is LM12749. These bearings are from a brake...