Search: Trailer Jack Socket   >   1989  x   >  

a motor with a half inch I.D. drive socket and then I could make an adaptor plate for the bolt pattern. | could you please give me the name of the company that took over for Atwood, or could you suggest a motor with a half...

What is the inside width of where it bolts to the jack. | What is the inside width of where it bolts to the jack. | I went out to the warehouse and pulled a Replacement handle, # DL22674, to measure it for you. Where the handle...

Since this is an industry standard design/pattern for the jacks and coupler to work together | Since this is an industry standard design/pattern for the jacks and coupler to work together: is there a bolt length that is recommended...

-lb Trailer Jacks with a 5/8" Swivel Pin # e52JR will indeed work with your Round, Pipe Mount Swivel | Will Item # e52JR fit see photo | Hey there Gary, thanks for the photo and yes the etrailer Bolt-On Swivel...

# RM-2120, or for a more permanent solution bulb and socket kit # BX8869. If you go with the bulb | Hello, what parts would I need to flat tow a 89 jeep cherokee ? it is a 4x4 and 5 speed manual. Thanks | To flat tow your 1989...

in the trailer and I do have a 30 Epicord 30amp cord used for campgrounds. What do I need to get to connect | Id like to be able to connect my small camper 6x12 to an outdoor outlet at our house. I believe I need a 30amp to...

with 4,755 lb gvwr. In either instance we can determine a weight distribution system for you. The trailer | I have a 1989 shasta 240b Im trying to find the tongue weight of this camper she that I can purchase a distribution...

. on the drive socket. I cant find the right bolt pattern, Can you point me to a motor. the trailer is a 14,000 | I have a 1989 Prairie Schooner 32 ft. 5th wheel, made by Mallard Coach. I need to replace my...

6 pole socket shows power on at brake controller output and ground? Any Ideas | 6 pole socket shows power on at brake controller output and ground? Any Ideas | It's normal for a brake controller to send some power back to...