Alfa Romeo  x   >   Yamaha  x   >  

2023 Alfa Romeo Stelvio Estrema What hitch 2 to you recommend as the best option? Primary use will be for a bicycle rack. I prefer the Stealth rack but it appears that it may not fit the 2023 Stelvio model? Can you confirm that it will...

I would like to pull my 5 x 8 trailer with my yamaha viking but do not know if a wiring kit exists for trailer lights. I have looked but to no avail. Is something like this available? | You could use a universal style of trailer wiring for...

Hello I have a 2019 Alfa Romeo Stelvio Ti and looking for a trailer hitch with the wire harness. Do you have both items the would fit my SUV? | For your 2019 Alfa Romeo Stelvio we have the Stealth hitch setup part # SH54FRT which gives you...

Do the side lens come with the above lens ? | Yes, the smaller side lens does come with the Replacement Tail Light and Side Marker Lens for Optronics Combination Tail Light # A16RB that you referenced. |

Can you tell me what is the diameter of the inner hole of the cup? I see in the video the outer diameter of the cup itself is 1-1/2inch | Hey Toni, the inner diameter of the Replacement Mounting Cups # JIF58FR that you referenced is 1-1/2 inches...

I am looking for a Scissor Step that mounts from underneath the camper not on the wall the door is on. How do you mount your Aluminum Scissor Steps, 24 Wide, 31-39 Tall Code: AS24? The only place I have available to me to mount any type of...

hello it looks little bit hard to install a hitch on my Alfa Romeo Stelvio does it is possible to find one bike carrier with Stiker or something like ? SeaSucker Komodo Trunk Bike Rack - thank a lot for your help | The Draw-Tite # 76199...

I have a 2020 Alfa Romeo Stelvio with a hands free rear hatch sensor. Do you know if the sensor will still function with the Draw Tite hitch part #76199 attached to the vehicle? Thanks. | The Draw-Tite Max-Frame Trailer Hitch Receiver # 76199...

where is the install video for CUSTOM FIT VEHICLE WIRING TEKONSHA CUSTOM FIT TRAILER HITCH WIRING 4 FLAT for a 2019 Alpha Romeo Stelvio? Thanks | That is not a common car and for us. To make a video we have to have one brought in by a customer....

Do you make Tonneau covers for a Yamaha Umax? | I have a possible solution for you, however, we do not carry tonneau bed covers for your Yamaha Umax Golfcart / UTV. If you just wanted the cover for looks or to keep the cargo inside the bed,...

Good Morning what is the correct part number for a replacement winch wire rope for a Super Winch LT-2000? is there a Synthetic Rope available for this model? Thanks, | The Superwinch LT2000 winch has a 50 foot long wire rope with a 5/32 inch...

What is the length and gauge of the red power wire that is included? thanks, | The red power cable of the # DL25721 that you referenced is 25 feet long and has an 8 gauge thickness. |

Will this fit this ATV properly? Blogs have complained about fitting and quality of hardware. I have a superwinch ATV2000 on a 2002 Suzuki KQ300, no problems in 12 years, easy installation too. easy clean fit on 2013 Yamaha 550EPS ??? | The...

I NEED A CORRECT MOUNTING PLATE FOR TERRA WINCH THE ONE I PURCHASED WAS FOR YAMAHA 550/700 AND SEEMS INCORRECT | To install the Superwinch Terra Series ATV Winch on your 2007 Yamaha Grizzly YFM 660 4x4 you need the Bulldog Winch Custom-Fit Steel...

Will this winch fit onto a 2007 Yamaha 450 Rhino? Do you sell the mounting plate? | Yes, you can use the Superwinch LT200 winch with your 2007 Yamaha Rhino 450 4x4. The custom mount you will need for your 2007 Yamaha 450 Rhino is the Bulldog...

Will this hitch work for an Stelvio 2023? | Yes, the Draw Tite hitch part # 76199 that you referenced is a confirmed fit for a 2023 Alfa Romeo Stelvio. |

I have a 2007 Yamaha wolverine 450 4x4. I am looking for a trailer hitch bolt on kit. And a winch mount. | We do have a winch mount for your 2007 Yamaha Wolverine 450 4x4. It is # BDW15140. We do not have a hitch mount for your Wolverine though. |

HOW IS IT INSTALLED? DO YOU HAVE VIDEO? | We don't have an install video yet for the part # BDW15131, but I did attach a picture that shows the install instructions. It has a diagram that shows how it bolts to the Grizzly frame as well. |

Item # SW1125220 I was looking at this part number for a winch for my atv. One picture shows a mounting bracket and was wondering if that bracket would work with my 2016 Yamaha Grizzly 700 EPS . Thank you | There is a specific winch mount...

I would like to purchase a winch and everything I need to mount it to my ATV. I have a 2006 Yamaha Wolverine 450. I was looking at part # sw1130220. | For your 2006 Yamaha Wolverine 450 we have the custom mount # BDW15140 which mounts directly...

I have a 2002 bear single axel trailer with a 3500 lbs capacity. Is there any chance you can help me figure out what leaf spring I need? I can supply the vin if needed. | What you'll need to do is measure your current springs without the weight...

Does this winch mount fit on a 2006 yamaha wolverine 450 4x4 | I spoke with my contact and they said the Bulldog Custom-Fit ATV Winch Mounting Kit, part # BDW15140, will fit the 2006 Yamaha Wolverine 450 4x4. It will also fit the 2006 to 2009...

Hello, On the video for the Curt hitch install 2021 Alfa Romeo Stelvio TI AWD, the narrator notes how some locking hitch pins wont fit due to tight clearance. Do you sell a low profile pin that will fit this hitch? Thanks | I recommend using...

Hi,have a new aluma tilt two place snowmobile trailer,has 12” trail express tires max load on each tire 1200lbs at 65psi. Trailer was used for 6 months probably used once a weekend for 300 km each time. Has 2200 lb axle,two snowmobiles weigh...