Replacement Tarp for Extang Black Max Soft Tonneau
WILL PT#EX5940 TONNEAU COVER FIT RAIL SYSTEM ON 1992 CHEV CK1500 STEPSIDE P/K W/6.5inch BED. IF NOT, ADVISE CORRECT PART #. | I do have an option for you but the Replacement Cover for Extang FullTilt Vinyl Tonneau Cover with Snaps # EX5940 replaces...
Aries Grille Guard For 1992 Chevrolet C/K Series Pickup Truck
I am in need of a brush guard brackets not sure the brand of brush guard | I am unable to provide the correct kit for you due to the fact that the mounting hardware is specific to the vehicle and the brush guard itself and we do not have that...
Trailer Hitch Option for a 1992 Toyota TownAce
Do you have any Hitch options for a 1992 Toyota townace? | Hey Jonathon, we unfortunately do not have any trailer hitches that are custom fit to a 1992 Toyota TownAce. It looks like these were never widely available in the US which explains...
Availability Of Class III Or Higher Trailer Hitch Receiver For 1992 Cadillac Brougham
Looking for a Class 111 or IV. Hitch. 1992 Cadillac Fleetwood Brougham de Elance. | I have an option for you, but there is not a custom fit Class III or IV trailer hitch receiver made for your 1992 Cadillac Brougham de Elance. With that said...
Does the Prodigy P2 Trailer Brake Controller Have to be Mounted Level to Function Properly
Brake controller setup/mountain On my prodigy P2 does it have to be mounted level to operate? | The Tekonsha Prodigy P2 # 90885 does have requirements for mounting. The P2 must be mounted on a level horizontal (side-to-side) plane and must be...
Parts Needed to Flat Tow a 1992 Geo Tracker Behind a Motor Home
I would like to know what components I will need to tow my 1992 Geo Tracker 2 door/2 wheel drive using a Roadmaster Falcon 2 towbar that I have. I am also wondering at what speed this towbar is rated for. I m 100 new to this type of towing...
Ladder Rack Recommendation for 1992 Ford F-250
I am looking for a product to fit on top of a 92 ford f250. It has rain gutters on it. I would like to but a rack on top. Do you thing the Rola Haul Ladder rack would work? | We have a similar ladder rack that does fit your 1992 Ford F-250...
Do I Need to Remove Truck Bed of 1992 Dodge D250 to Install B&W Turnoverball BWGNRK1300
Hi, I recently purchased Hitch # BWGNRK1300 from etrailer.com. Question: Do I need to remove bed of 1992 Dodge D250 to install Hitch # BWGNRK1300? Or can it be installed on truck without lifting off bed? I dont have installation directions....
Trailer Hitch Receiver Tube Drop on the B&W Hitch Part # BWHDRH25198 and Curt Hitch Part # C15511
trying to find out the from the frame to the top of the reciever tube on theses two item b and w hdrh25198 curt 15511 i see different measurements from differt sites | The distance from the top of the mounting flange to the top of the receiver...
Camper Tie Downs that Fit 1992 Ford F-350 Long Bed with OEM Hitch
Hello- Looking for a rear camper tie down for my truck: 1992 Ford F350 Crew Cab Long Bed 4X2 No side steps under truck bed OEM hitch What REAR tie downs will work for my truck? Thanks! | While Torklift doesn't have any rear camper tie down...
Snow Chains for Tire Size 285/75-16
need snow chains for 285-75-R16 | For your tire size of 285/75-16 the Titan chain set part # TC2533 would be a really excellent option. These install easily, provide great traction and aren't too bad on price either! |
Converting Vehicle 6-Pole Wiring to 7-Way for Using Curt Echo Brake Controller C51180
If my tow vehicle is equipped with a 6 pin receptacle, can use an adapter to convert to 7 pin flat and then use the Echo brake controller? | Yes, you could use an adapter like # 47435 to convert your 6-pole wiring to the 7-way format to allow...
Recommended Trailer Hitch for 1992 Toyota Hiace Motorhome
hi i need to buy right away a Hitch for a 1992 Toyota Hiace RV i think this RV is built on a Toyota Hiace TRUCK i think LH80 i hope you guys can find me the right Hitch tha i can just bolt to the frame. thanks alot guys, bless | There isn't...
What is Needed to Flat Tow a 1992 Toyota 4Runner
can this fit a 1992 toyota 4 runner and what is the lengh of this product, do i need an adaptor 4 this | This RoadMaster Base Plate to Blue Ox and Demco Tow Bars Adapter, part # RM-033, is usually used to attach a set of Roadmaster base plate...
Does 7-Way of Universal Installation Kit for Trailer Brake Controller # ETBC7 Use Blades or Pins
Does the 7 way connector use blade connections or pins? | The 7-way connector of the Universal Installation Kit for Trailer Brake Controller # ETBC7 that you referenced uses the blade style pins which are very common in RV applications. The...
Finding Intermittent Ground Problem in Wiring of Trailer Towed By 1992 Geo Tracker
Hello! So I purchased your Curt brand trailer wiring converter 56175 for my 1992 Geo Tracker as your website recommended. Ive wired everything as per instructions and using circuit tester to verify wire function etc. I tested the lights after...
Tow Bar Recommendation for a 1990 Honda Civic with a Standard Roadmaster Base Plate Kit
Have 1990 Honda Civic with RM 508-1 base plates. Will the # 501 tow bar fit? Is there a better choice for a tow bar, if so, what? Thanks, | Yes, the RoadMaster StowMaster Car-Mounted Tow Bar # RM-501 that you referenced is compatible with...
Will Bestop Upper Door Sliders Fit 1992 Jeep YJ
Will it for YJ with upper door | The Bestop Upper Door Sliders # B5178637 are designed to fit the 1988-1995 Jeep YJ with steel lower half doors. If your current upper half is removable you can use this as a replacement. If you have the full...
Is there a Custom Gooseneck Hitch Available for a 1992 Chevy C/K Series Cab and Chassis?
I have a 1992 chevy c3500 Cheyenne dually cab and chassis truck with a 34 inch outside to outside frame. Im looking for a gooseneck receiver I can install directly to the the Frame without having to modify it. Do you make anything for this?...
Recommended Trailer Hitch Compatible With 1992 GMC 1500 4WD with Standard Bumper
I have a 1992 GMC 1500 4wd, 8 ft box std cab, std bumper. Frame is 34”. Will the 13042 hitch fit this pickup? | The Curt Trailer Hitch Receiver # C13042 is a confirmed fit for your 1992 GMC 1500 4WD truck. There is no drilling needed for this...
Can I Use Rhino-Rack Batwing Awning on a Palomino Truck Camper?
Can I mount this to my palomino ss-550 truck camper? I sent an email to Forest River asking the same question but no response. I want to add this to my pop up camper. Can it be done? | The Rhino-Rack Batwing Awning, # RR33100 installs in the...
Installing a Gooseneck Hitch on Fifth Wheel Rails on a 1992 Dodge Pickup
I have bought a 1992 dodge full size pickup to haul my gooseneck trailer. The truck is a d-250 diesel with low miles. I had bought a hidden hitch but after getting the truck it looks like a hidden hitch is out of the question due to the bed...
Brake Installation on 1960s Custom Trailer
I have spent some time checking the brake drum depth and brake shoe width with dial calipers. Everything seems to be compatible, although the armature plate does run close to the outer edge of the brake shoe backing plate. With the drum/hub...
Choosing an Aftermarket Rear Bumper for 1992 Ford F-150
I need just a basic rear bumper for my basic 1992 F-150 Ford pickup truck and I am not sure which one to order. What is the difference between this part #21002-92230 vs part #21007-92230? One talks about a ranger which my truck is not and...
Filter Your Search
Contact and Help