!Oldsmobile  x   >   CargoGlide  x   >  

2017 F350 6foot 3/4inch Bed Does this cargo Slide CG2200HD-8048 Require a special installation kit for aluminum truck beds? | Right around the time Ford started developing their aluminum truck beds, GargoGlide began replacing the plus-nuts...

how much does the 1500xl weigh? | The CargoGlide 1500XL Sliding Tray for Trucks - 1,500 lbs - Steel Frame - 8" Rail - Drop Link # CG1500XL-9548GM has a shipping weight of 430 lbs so it likely will be just over 400 lbs when you remove the packaging....

Why are you so shy with the dimensions. Thanks, | The overall length of the tray is 95 inches and the width is 48 inches. The deck height is 4-1/2 inches and the lower side rails are 4-1/2 inches and the higher side rails are 8-1/2 inches. We...

whats the dimension from inside tray? | The dimensions of the CargoGlide # CG1000-6347 are 63 inches long by 47.5 inches wide. This is the correct fit for a 2001 Chevy Suburban 1500. There are also several other versions that will also fit your...

Would this interfere with my factory installed puck system in any way if I chose to remove just the tray. So I could use my gooseneck if I needed to without removing the entire thing. I have a 2022 f350 kingranch with a long bed. | According...

Will this bed slider really fit a ford ranger 6.5 ft bed? | Yes, the CargoGlide 1000S Sliding Tray for Trucks # CG1000-7038 that you referenced will fit your 2006 Ford Ranger with 6-1/2-foot bed. This USA-made 1000-lb-rated sliding tray uses...

Is it required to bolt the cargo glide down to truck frame. What voukd happen if you dont | The CargoGlide Slide Out Cargo Tray # CG1500XL-7548 that you referenced attaches to the truck bed and not to the truck frame. |

I have a 2016 toyota tundra with a Decked Bed Drawer system. I was advised by Decked that the CargoGlide CG1000-6348DM would fit. I see that you have the CG1000-6348, can you can advise about what the DM designation is? Thank you, Chris |...

How does this fit in a 2011 Yukon | I found some pictures of the Cargo Glide # CG1500-4147 installed on a Chevy Tahoe which is basically the same as a 2011 GMC Yukon and the brackets install in the rear cargo area of the SUV and would slide...

Hello, Id just like to confirm the model you are selling is the newer version, like the one pictured with the bare look metal end and integrated t-slots for the adjustable tie downs. I dont want the older red ended model with a long center...

total weight of slide out tray | The CargoGlide 1000 Sliding Tray for Trucks # CG1000-7548 has a total weight of just about 150 pounds. I have attached a short video demonstration and the written installation manual that you can also check out. |

install instructions please | I've linked the instructions for installation of the Cargo Glide 1000XL Sliding Tray for Trucks # CG1000XL-7548 to this answer for you to have a look at, as well as some more abbreviated ones below. The CargoGlide...

Im working on a 2017 GMC sierra 2500hd 6.5foot bed. I find a lack of information on this product in the height to clear my tailgate. My tail gate is 1-1/4inch higher than the ribs on my truck bed. what is the height of this unit from bottom...

What are the dimensions of this cargo tray? | The Cargo Glide sliding tray part # CG1500-6347 is 63 inches long and 47 inches wide. |

What is the width of tray from side to side for a 2022 FOR F 250 SUPERCAB 4X2 WITH A 8foot ROYAL SERVICE BODY? It measures 49x8ft Looking to purchase the: CargoGlide 2200XL Sliding Tray for Trucks - 2,200 lbs - Steel Frame - 8 | The CargoGlide...

We have a 2016 Toyota Tundra SR5 TRD 4x4 off road with a standard 6 ft 5 or 7 inch bed. Actually my husband’s truck. I am looking to get him a bed slide to make it easier to remove thing from the bed. The truck has a bed liner and a Tonno...

What bed slide is best for my 2024 Ford F-350 long bed? | I recommend the CargoGlide 2200XL Sliding Tray # CG2200XL-9548 as the best option for your 2024 Ford F-350 long bed. This tray has a 100% extension so you will be able to access the entire...

Looking for more info on the product. Can this be mounted in a truck bed or do you have 24” wide bed slide? | I contacted MORryde, and they informed me that yes, the MORryde Sliding Tray for RV Cargo Compartment # MR87FR can be mounted in...

What is the width of this tray? | The CargoGlide 2200HD Heavy-Duty Sliding Tray for Trucks # CG2200HD-9548 has OUTSIDE dimensions 95-inches long x 49-1/4-inches wide. The INSIDE deck surface is 94 x 48 inches. The total deck height is 5-1/4-inches....

How much does it weigh in the 2017 GMC Canyon crew cab 74 in long bed version? | I called my contact at CargoGlide and asked about the 1000XL Sliding Tray # CG1000XL-7041 for your 2017 GMC Canyon. The tray weighs 260-lbs. My contact said the...

I have a 2012 Chevy Suburban. I looking at the CargoGlide systems and wondering if the installation would require drilling new holes or do they use existing mounting points? Not sure if Im getting the CG1000-6347 or CG1500XL-6347. Thanks...

Hello, I am interested in a heavy duty bed slide for a 2014 ram 1500. It has the longer bed but it has a liner in it. The unit that pops up when I search on your site shows without a liner. Is there a unit that will work with the liner? Thank...

How much does it weigh? Thank you | The CargoGlide 2200XL Sliding Tray for Trucks # cg2200xl-9548 weighs 503 lbs. |

Do this come with the appropriate hardware needed to install on 2019 F450 with aluminum bed? Im concerned about corrosion if installing steel hardware on aluminum bed. | Right around the time Ford started developing their aluminum truck beds,...