How Much Do The Timbren Axle-Less Trailer Suspension System Electric Brake Hubs Weigh
How much does this system weigh? I’m trying to get my trailer as light as possible. | The Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs part # A35RS545E weigh about 135 lbs. They have a 3,500 lb weight capacity. The Timbren...
Replacement Hub With A 5 on 4.5 Bolt Pattern For A Hub With A 4 on 4 Bolt Pattern
Hello! I am hoping to get a product recommendation so I can ensure a proper replacement fit. I have a camper trailer with Dexter 4on4 8-91a hubs. I’m looking to swap the hubs out for 5on4.5 hubs to match some new tires I have. Could you tell...
Can a Disc Brake Master Cylinder be Used with Drum Brakes on a Trailer
I bought Master Cylinder for Titan Actuators - Disc Brakes part # T4747100 , but my trailler has drum brakes cylinder #DX66FR.Can i install disk brakes cylinder ? If not , what is different between part# T4747100 and #DX66FR...Thanks ! |...
Locating Replacement Hubs for 1994 EZ Loader Boat Trailer
I have a 1994, model 17-20 2350# capacity ezloader I need new hubs for. The measurements on the spindle are as follow as best as I can measure: Seal, 1.681” or 111/16” Inner bearing, 1.375” or 13/8” Outer bearing, 1 1/16” I think it might be...
Can a Trailer with Hydraulic Brakes Have Electric Brakes Installed
etrailer, I recently purchased a 2002 Jayco Eagle 12UD ST pop-up camper trailer. It came with hydraulic surge brakes that dont seem like theyre working properly right now. Id like to actually swap the hydraulic system for an electric system...
Converting Electric Brakes to Electric Over Hydraulic on Horse Trailer
I am looking to upgrade from electric drum to electric over hydraulic drum if this will provide more braking power on a horse trailer with living quarters, GVW is 18k, tandem 7k axles, loaded is about 16k. Do not want to change to disc brakes...
Available Axle Over-Under Kits for 5th Wheel Trailer
I would like an axle lift kit for my fifth wheel. It has Dexter torflex axles. 4k capacity. dex#3722505 s/n 121848799. I think it is considered a 10. I would like a 3inch lift | For a # 10 square 4K Torflex axles you can use kit # K71-707-02...
How to Determine Correct Replacement For Hadco Hub
Im looking for a replacement hub for the axle I have it dont matter if it is a brake or idler axle the hubs that are on it are hadco la 3107 with a 5x5 bolt pattern but Im open to other patterns | I was unable to find any reference to a Hadco...
Can The 6,000 Pound Dexter Axle 8327830 Be Used With 2" Wide Leaf Springs?
ARE THE SPRING PERCHS FOR 2inch WIDE SPRINGS? | The spring seats included on the Dexter Trailer Axle Beam with E-Z Lube Spindles # 8327830 will work with springs that are 1-3/4" wide and 2" wide. This is also American made and rated to 6,000...
Hub Recommendation for 3,500 lb Axle with 5 on 4-1/2 inch Bolt Pattern
I have a 5X8 utility trailer with a 3500lb axle. I want to change my hubs to 5 on 4-1/2. I would like to make sure everything I have on the part list below will work together. I am going to put 205/75R15 tires on the wheels. I am going to...
Comparing Ease Lube Spindles and Bearing Buddy Bearing Protectors for Boat Trailer with 2K Axle
I am wanting to change out my current axle on a 5x8 that I use for a kayak trailer. I back the trailer in the water currently and just have bearing buddies on the fronts. Will that hurt my bearing doing so with current axle? If so will this...
Replacement Spindle Nut Recommendation for a Nev-R-Lube Spindle Bearing Hub
I need the nut for a 50 mm never luge bearing | The correct part number for a spindle nut for the Dexter Nev-R-Lube bearing hubs is the part # 6-183. |
Can Brakes be Added to Timbren Axle-Less Trailer Suspension System
I am about to purchase an offroad trailer that has the timbren axle-less suspension system but it does not come with brakes. Do you guys offer brakes that will work with this setup? Thanks, | Standard brake assemblies can be added to the Timbren...
Fitment of 4-Bolt Electric Brake Assembly for Pop-Up Trailer with a 5-Bolt Hub
Hello, I recently asked a question that was answered very well by Jameson on this subject, so thanks!! But I wanted to DOUBLE check just in case! I want to install electric bake assemblies on my Jayco Eagle 12UDST Pop Up camper trailer in...
Can 20440I-EZ-60 2,000 lb Axle be Used w/ 49 Inch Spring Center Measurements on Single Axle Trailer
Im in the process of planning the replacement of the axel and leaf springs on my Haulin Trailer Model 4700. Im looking at replacing my Dexter P-21 SLR axel with your #204401 EZ60 axel kit, but Im concerned about the leaf springs. My existing...
Recommended Lug Nut Torque Specs for Trailer Hub and Drum Assembly
I have a 1998 Jayco eagle 10 ud. The stock idler hub uses lug bolts. I putting on brakes and this drum hub, which uses studs and lug nuts. What torque should i use on these lug nuts? The same as my user manual says for the Jayco trailer’s...
Replacement #84 Spindle for Dexter 3500-lbs Axle
Will this fit a dexter 3500# axle? I need to replace a spindle, bearings, backing plate, and drum. | As long as you've got a 3500-lbs EZ Lube axle then you can use the #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4"...
Filter Your Search
Contact and Help