Recommended Tailgate Assist For A 1998 Ford F-150
Which oodelvfits: 1998 Ford F150? | I'm not quite sure what you mean but I'm assuming since you were looking at a tailgate assist that that's what you're looking for. If that's the case then the DeeZee Tailgate Assist Custom Tailgate-Lowering...
Will the Draw-Tight Activator IV fit a 1997 Ford F-150
Checking to see if a Draw-Tight Activator IV will fit a 1997 Ford F-150 light duty. Thanks | Yes, the Draw Tite Activator IV brake controller part # 5504 will work well in your 1997 Ford F-150. If you have a factory 7-way at the rear of your...
Recommended Base Rail and Installation Kit for 1997 Ford F-150
I need Rail Brackets for a Reese 5th wheel 16 K mft in 2-6-2004 # 30047 on a 1997 Ford F150. Are they available predrilled for a truck this old? Thank You | We do have custom base rail kits available for your 1997 Ford F-150. I recommend...
Husky Fifth Wheel Rail Kit to Fit 1999 Ford F-150 and Demco Hijacker Auto Slide Hitch
Will this kit work on 1999 Ford F-150 mounting demco hitchhiker auto slide hitch | Husky does offer a rail kit that fits your 1999 Ford F-150 which can be used with a Demco Hijacker Autoslide but the rail kit part number is actually # HT31409-686....
Needing Replacement Westin Bull Bar Mounting Hardware for a 1998 Ford F-150 4X4
I need replacement mounting hard ware for a 1998 Ford F-150 4x4 which one do I need? | If you have the Westin Bull Bar for the 1998 Ford F-150 4X4, part # 32-0240 in Chrome or # 32-0245 in Black, then the replacement hardware kit will be # 32-024PK. This...
What is the Size of the Inlet on the Air Filter Intake on the Air Lift Wireless Compressor AL25980EZ
What is the size of the inlet for the air filter intake. I would like to put a “snorkel” and move the air intake to a more clean environment where dust and water is not a concern to prolong the life of the pump and components. | I was able to...
Correct Wiring Harness for a Voyager Brake Controller on a 1999 Ford F-150, F-250, or F-350
i have a controller that has 4 wires. my 99 ford is setup with a connecter already. what type of harness do i need to hook up. | For a 1999 Ford F-150 or F-250 light duty or F-250 or F-350 Super Duty, you will need Brake Control Wiring Adapter,...
Replacement Screen Door Slide for 2018 Starcraft Travel Trailer
Current component is in parts and needs to be replaced.. Panel measures 9-3/4inch W x 12inch L.. Replacement unit that I am interested in # 37211175 measures 12inch x 12.. Is this item available in my panels dimensions? Please advise and thank...
Husky Fifth Wheel Rail Fit for 1999 Ford F-150
I have a 1999 ford f150 extended cab 4 door. What accessories do I need to install the hitch | For your 1999 Ford F-150 to install a set of Husky fifth wheel rails you would need the part # HT31409-686 which is a confirmed fit. This will let...
Westin Nerf Bar Fitment on a 1999 Ford F-150
I have a 1999 F150 XLT extended cab rear suicide doors on both sides. It came with Westin nerf step bars black than I believe are OEM. They are badly rusted, and I am looking to replace them, hopefully using the installed mounting hardware....
Recommended Trailer Wiring Harness for 1999 Ford F-150 or F-250 Light Duty Truck
1999 Ford F-150 or F-250 Light Duty Truck I was curious if all the wires went completely through the T or if some went from one side straight to the trailer plug. My thought is if I was to use 2 of these harnesses on one truck to put a 7 pin...
Edge Performance Tuner for 1999 Ford F-150 XLT with 5.4L V8 Engine
Would this programmer #EP59yr work on my 1999 f150 5.4 XLT or would I be outta luck. Also would it work with my cold air intake. I like this one because I could use it with one of the dash pods that makes it look it came factory with it. Any...
Will the Edge Evolution Programmer for Ford Triton V8 4.6L and 5.4L Work On My 1999 F-150 5.4L XLT?
Would this programmer #EP15051 work on my 1999 f150 5.4 XLT or would I be outta luck. Also would it work with my cold air intake. I like this one because I could use it with one of the dash pods that makes it look it came factory with it. Any...
Spacing Between Frame and Axle for Timbren SES Kit for a 1997 Ford F-150
I have about 6.8 inches between the frame and the axle on my F-150. Is that enough to give me an inch clearance unloaded? I had a set on an F-250 that worked very well, but when they came down on the axle, the ride was much stiffer. I do...
Can the Curt Rebellion XD Shock Absorbing Adjustable Ball Mount be Used with Weight Distribution
im making a trip to california 1200 mile trip one way. i will be pulling 13-ft. trailer, with kukota tractor 0n flat bed trailer. wanting to use curt rebellion xd shock absoring adjustable ball mount w/ 2 5/16ball 15k. Question: wont I need...
Replacement Air Bag Helper Spring System for a 1997 Ford F-250 Light Duty Pickup
Hi, I have a 1997 ford light f250 that needs replacement bags. Any suggestions? Thank you | Depending on the age of your Air Bags on your 1997 Ford F-250 Light Duty truck they may be obsolete. If you can find any identifying marks on the outside...
Solution for Reese Signature Series Hitch that Needs New Legs
Would these fit a signature series? | The Signature Series fifth wheel hitches have been discontinued for long enough that replacement parts are no longer around. The Signature Series line was replaced by the Elite Series so if your Signature...
What Is The Current Draw For Optronics Sealed Side Marker Light
What is the current draw for this lamp? Also, I notice that most or all of the LED lamps have the current draw in the specs, but the incandescent lamps do not. | I spoke with my contact at Optronics about the Sealed Side Marker Light, part...
Installing 12V Trailer Accessory Power Lead on 1999 Ford F150
I ordered brake controller from you and your info is great, would like to know if I can run hot lead to trailer connector from power dist. box as there is two hot wires comining out of it that are not being used. bought pickup used so dont know...
Will the Brophy Camper Hold Down # HSSF Work on a 1998 Ford F-150
Hi I just bought a used set of happijac tie downs,wont work! Did a search and found you. Will these work? I have a Travel Lite 800 series truck camper. Thanks. | The Camper Hold Downs, part # HSSF, may work on your 1998 Ford F-150. The hold...
Weight Distribution System for a 4610 lbs Dry Weight Thor Tahoe Trailer Behind a 1999 Ford F-150
I have a 99 F-150, 4.6L 2wd. Will pull a Thor Tahoe 22BH travel trailer. Dont know tongue weight of trailer. Title of trailer lists unlaiden weight at 4610lbs. Based on only this information can you tell me approximate tounge weight of trailer...
Stabilizer Jacks For StarCraft Travel Trailer
Looking for stabilizer jacks for 2018 StarCraft satellite. | For stabilizer jacks on your StarCraft travel trailer a great option is the Scissor Stabilizer Jacks # TJSCHD-24. These have a 5,000 lb capacity which is more than enough for your...
Front Mounted Hitch Availability for 1998 Ford F150 2WD
I have a 2wd 1998 ford f150 that I need a front mount hitch on. I have not been able to find an applicable hardware package on your site for my truck. Do you perhaps have something for my situation that is not listed on your site? Thank...
Replacement 7-Way Socket for 1998 Ford F-150 Factory Trailer Connector
I have a 1998 f150 4x4 that came factory with a 7 blade connector. Some of the wiring is damaged and I would like to replace it. Do you sell a replacement for this? Thank you ! | You can use Curt Replacement Multi-Tow 7-Way & 4 Pole Trailer...
Filter Your Search
Contact and Help