2 Ball Adjustable Ball Mount Recommendation that Can Do Up to 9 inches of Drop
I am looking for an 8inch fixed aluminum ball mount for my truck. I have two trailers I routinely tow, one needs a 7inch , and the other needs a 9inch . I have read a couple reviews where the adjustable 10inch actually only give you 8inch...
Does Power Grip RV Temporary Power Cord Extension Require Adapters
Our Camper has a 25 foot built in cord but not long enough to connect at a particular site we like. Will this extension fit on the end without the need for a special adapter? If an adapter is needed can you recommend? | The Power Grip RV Temporary...
Determining The Correct Trailer Hitch For A 1958 Chevy Task Force
To Jameson C , Need more info regarding a hitch for 1958 Chevy Truck . | Since there aren't custom-fit hitches available for a 1958 Chevy Truck you'll be limited to a multi-fit or adjustable style trailer hitch. The Curt 3-Piece Trailer Hitch...
Trailer Hitch for 2002 Cadillac Eldorado for Towing Motorcycle Trailer
Will this be suggested for a light duty trailer such as one to tow a 700 pound Motorcycal | The Curt hitch part # C12068 that you referenced has a trailer towing capacity of 3,500 lbs so it would easily handle a small trailer that has a 700...
Parts Needed to Add Wiring Harness to 1971 Cadiallac Eldorado
Would like to add a light trailer to my 1971 8.2L 360HP Cadillac Eldorado. Do you have something Original or that can be adjusted to fit my vehicle? | It sounds like you might be trying to add a wiring harness to tow a trailer with your 1971...
Which No-Drill Mounting Bracket For Curt Trailer Hitch Receiver C12068 On 1996 Cadillac Eldorado
Do you know with certainty which Tow Readyinch Mount Bracket Long 18136 or Short 18140 would be the proper size/length for my Eldorado application? | Since the Curt trailer Hitch Receiver # C12068 has the crosstube hidden behind the rear bumper,...
Baby Moon Hub Caps for 1958 Chevy Apache Pickup with 17.5" Wheels
I have a 1958 Chevy Apache 3/4 ton pickup with 17.5inch wheels. i am missing one babymoon hubcap. the wheels have tabs on them to hold the cap on. do you have a replacement cap? | I did some looking around and it looks like we only have baby...
2011 Jayco Jay Feather Tire and Wheel Replacement Recommendation
2011 Jayco Jay Feather tire and wheel replacement Just bought this camper and prior owner thinks these tires are original so Im thinking of replacing them. They are.. ST205/75 R14 The tire says Do Not Mount on a 14.5 inch Rim Load Range...
Recommended Cover for 22' Jayco Travel Trailer for 6 Months Storage in Connecticut
always have had a adco cover the item # 290-52242 looks good, it says for rain and snow, but to be used between trips. well i am covering it for 6 months threw the winter, is it ok for that length of time, this is not short term, i like that...
Availability Of Lift Kit For 2011 Jayco Jay Feather Ultra Lift W/ # 10 Dexter Torflex Axle
Do you guys have a lift kit that is bigger then 2 5/8?this trailer has no clearance and Im replacing Jacks all the time. | Since your 2011 Jayco Jay Feather Ultra Lite X17Z has a # 10 Dexter Torflex axle the only lift kit available for it is...
Will the 16" Dexstar Conventional Steel Wheel with Offset Work On a Vehicle
Hi etrailer team I have been struggling trying to find tires for my 1959 Chevrolet Apache 3600 3/4 ton 8 lug one piece wheels. They currently have Yokahama 8R x 17.5 but they are no longer made. Coker sells a 8 x 17.5 STA BIAS tires, but...
Modifications to Bumper Cover to Install Curt Class II Trailer Hitch on 2000 Cadillac Eldorado
Would i have to cut hole in rear bumper cover for this hitch? | Installing the Curt Class II Receiver, part # C12068 on your 2000 Cadillac Eldorado would require no cutting, trimming or other modification in the rear bumper cover. According...
Longest Available 1-1/4-Inch Class II to 2-Inch Class III Hitch Extension Adapter
Hello, I hjust bought a 2000 Cadillac Eldorado, and need a 1-1/4 to 2 adapter. I have old ones, but they are too short. I carry a bike rack with the adapter and a cargo carrier - nothing too heavy. The adapters I have are 6 hole to hole,...
Solution for Trailer Hitch Receiver for 1956 Chevrolet 3100 Task Force
Looking for a trailer hitch the bolts right on to my 56 Chevrolet 3100 task force | I do have a solution, but there are no custom-fit bolt-on hitches for your 1956 Chevy Task Force. What you can use is the Curt Adjustable Trailer Hitch Receiver...
Filter Your Search
Contact and Help