Replacement Step Gear Motor for Kwikee Series 25 RV Steps
Good morning. I have installed a model 216945 on my RV and broke the small gear of the electric motor. Is it possible to buy only this gear without having to change the entire electric motor? Thank you. | Since you have a Kwikee Series 25...
5-Pole Round Connector for Trailer to Match Connector on 1989 Electra Glide Harley Davidson
Trying to set up a small piggyback trailer. My female on bike is a 5 round pronge. And is a very small receptacle. Trailer is flat 5. Suggestions? | For the 5-Pole round connector on your 1989 Electra Glide Harley Davidson, like part # PK11502,...
Converter for Wiring Motorcycle 5-Way to Trailer
Wiring my 89 electraglide to my piggyback trailer. Hi I bought your round 5 pin plug to fit my harley end,then cut off flat 5 from trailer. Can only get blinkers. Any ideas? | Since you have a motorcycle it almost certainly has separate tail...
Which B and W Biker Bar Fits 2013 Harley Davidson Ultra Classic
Hi can you please let me know which biker bar will fit my 2012 ultra classic | For a 2012 Harley Davidson Ultra Classic the correct Biker Bar is the # BWMC2301 that you referenced. |
Availability Of Lift Kit For 2011 Jayco Jay Feather Ultra Lift W/ # 10 Dexter Torflex Axle
Do you guys have a lift kit that is bigger then 2 5/8?this trailer has no clearance and Im replacing Jacks all the time. | Since your 2011 Jayco Jay Feather Ultra Lite X17Z has a # 10 Dexter Torflex axle the only lift kit available for it is...
Replacement Vent Lid Recommendation for Fan-Tastic Roof Vent
I have 3 lfbv8100 fantastic fan I need cover for. They are 14 3/4 x 14 3/4 outside dimension I dont see that listed | For your Fan-Tastic roof vent the correct replacement lid is the part # FVK1020-19 that you referenced. It's outside dimensions...
Which B&W Biker Bar for Harley Davidson Ultra Limited Low FLHTKL
I have a 2015 Harley Davidson Ultra Limited Low FLHTKL. which biker bar is correct for this bike | The 2015 Harley Davidson Ultra Limited Low FLHTKL is classified as a touring bike, so you'd want to use the B&W Biker Bar Motorcycle Tie-Down...
Is There a Plug-In Brake Controller for a 2009 Tiffin Motorhome on Workhorse Chassis
2009 Tiffin Allegro Open road 34TGA Workhorse chassis. IS there a plug and play e brake controller kit? Or what parts do I need to add a controller. I have the factory tow package with the 7 pin connector with the brake wiring already to the...
Recommended Electric Brakes For My 1981 Flying L Stock Trailer with 4 Mounting Bolts
Im trying to find replacement electric brake assemblies for a 1981 Flying L stock trailer with 12x2 brakes. I can send a picture of the current brake assembly. It has 4 mounting bolts, not 5. | When it comes to replacing your electric brakes...
Correct B&W Biker Bar for a Harley Davidson Electra Glide Limited Low
Which model will work with my Limited Low. | I spoke to my contact at B&W and they informed me that the correct B&W Biker Bar Motorcycle Tie-Down System for your Harley Davidson Electra Glide Limited Low is the part # BWMC2301. I have attached...
Trailer Wire Harness for 2006 Harley-Davidson FLHTi Electra Glide
Im having a hard time trying to find a plug and play harness for a 2006 electric glide standard with 5 wires out. At this time my Trailer has a flat 5 pin but I will eventual go to 5 pin round. The right harness is my big issue. Thanks | The...
Does Motorcycle Need to be in Gear or Neutral When Transporting with the B&W Biker Bar
Should the bike be in gear while hauling or in neutral? | When securing your Harley-Davidson with a B&W Biker Bar like the part # BWMC2301 you referenced it really doesn't matter if you have it in gear or in neutral. The bar keeps your bike...
Parts Needed to Install 4-Way Trailer Wiring Harness on 2012 Harley Davidson Electra Glide
I have a 2012 Harley Davidson Electra Glide motorcycle. I am attempting to convert the current 5-wire set-up to a 4-wire system. Bike currently has separate Brake, Turn Signal, and Tail Lamp wires. I need to combine the Brake and Turn Signal...
How is Replacement RV Weatherstripping Picked Out for Windows
I ed the Tiffin Allegro Bay and the pictures are totally different from the ones I removed from the motorhome. Are these replacements which are different? | We don't have the window weatherstripping in our fitguide so you'd need to match what...
Replacement 15-Tooth Lippert Slide Out Gear Pack For A 2009 Tiffin Allegro QBA35
My front driver side gear pack shaft broke. I took in off and have a 15 tooth gear. Im not sure if its been replaced before I owned her. The Lippert sight suggests it should be a 18 tooth. Can a 15 and 18 be used as long as they are the same...
How Can I Carry Two 10 Speed Bikes On A Motorhome While Pulling A Tow Dolly
I have a 2003allegro bay 36 ft motorhome. I am pulling a tow dolly. I would like to know what bike racks I can get to hold 2 10 speed bikes. | My recommendation would be to add an adapter. Something like the Gen-Y Adjustable 2-Ball Mount w/...
5-Way Flat Trailer Wiring Harness for a 1999 Harley Electra Glide
Hello, It appears you have a flat 4-pole trailer wiring harness for my 1999 Harley Electraglide, .... Hopkins Custom Fit Vehicle Wiring - 33525 Plug-N-Tow R Wiring Connectors provide a no-hassle, quick and easy way to wire your vehicle. but...
Will B&W Biker Bar Tie-Down System # BWMC2301 Work for 2015 Harley Davidson FLHTK
Just want to make sure this will fit My 2015 FLHTK? Part Number BWMC2301 And does it come with anchor plates? | The B&W Biker Bar Motorcycle Tie-Down System # BWMC2301 referenced in your question is confirmed to fit all model years of the...
Rockford Fosgate Hide-Away Receiver on HD FLHTC
Will the Rockford fosgate hide away receiver work with a 2008 harley flhtcu Electra glide classic? | Yes, although is may not be as compact as you prefer for a bike, even a touring frame such as the FLHTC. You need the Remote for Rockford Fosgate...
Backup/Observation Camera Kit Recommendation 2008 TIffin Allegro Bay 38TGB
I have a 2008 Tiffin Allegro Bay 38TGB with an old Triplevision backup monitor. I dont see a model number on it but it is color and 7 wide LCD. Is there a plug and play monitor I can get to replace it? | Since we don't have a plug and play...
SnapPad Kit for 9.9" Diameter HWH Jack Feet
Will a 10” snappad work on a HWH 9.9” dia. Jack pad? | We have exactly what you're needing, Rex! For your 9.9" diameter HWH jack feet you need the SnapPad HiWay 10 Jack Pads for HWH and Atwood Leveling Systems w/ 10" Round Jack Feet # SN58FR. |
Wheel Chock Recommendation for Harley Davidson Electra Glide on Trailer
lIhave a Harley Davison o 6 electra guild need to know what I can use to secure front tire in a motorcycle chock? | Since your Harley isn't one of the standard fits that they have a B and W Biker Bar designed for you would need to use the Custom...
B&W Biker Bar Motorcycle Tie-Down System For a 2008 Harley Davidson Electra Glide Classic
Which product will fit my 2008 Electraglide classic. Harley | The B&W Biker Bar Motorcycle Tie-Down System # BWMC2301 is designed for the touring line of Harley Davidson motorcycles. I do recommend verifying your frame has the frame tube diameter...
B&W Biker Bar Compatibility With Custom Harley and Street Glide
Buddie ordered BWMC2304 can I use this for my 2016 HD Streetglide ? | The B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson 1-1/2" Custom Frame # BWMC2304 will fit frame tube diameters between 1-3/8" - 1-1/2" and frame...
Filter Your Search
Contact and Help