Folding Mattress for 2016 Jayco Melbourne 24K Short Queen
Have a 2016 Jayco Melbourne 24K and need a folding short queen mattress. Do you have one like that? | For what you are looking for you would want the Denver Mattress part # DE53ZR as this is a folding mattress in the queen short size you need...
Will B&W Biker Bar Motorcycle Tie-Down System Base # BWMC2300 Fit 2010 Harley Davidson Ultra Classic
Will the part number BWMC2300 fit on a 2010 Harley Davidson ultra classic limited motorcycle? | The B&W Biker Bar Motorcycle Tie-Down System Base with Anchor Plates # BWMC2300 will fit your 2010 Harley Davidson Ultra Classic. This will be just...
Recommended Seat Covers for 2012 Jayco Melbourne on Ford E-450 Chassis
Will # CA80112 fit caption chair with 27inch back height? | I have a solution for you, but the Classic Accessories # CA80112 will not fit a chair of that size and aren't going to be the best solution for your 2012 Jayco Melbourne built on a...
Recommended Trailer Hitch And Trailer Wiring For 2008 Land Rover LR2
can i use euro ball mount with Curt 13052-59146 Trailer Hitch | The Curt Trailer Hitch Receiver, part # C13052 is a verified as a good fit for your 2008 Land Rover. This is a Class lll hitch and it has a 2 inch receiver opening. The Euro...
Should the Blue Ox KarGuard be Used on a 2018 Chevrolet Equinox?
I Bought the BX8870 shield from etrailer a few weeks ago to use on my 2018 Chevy Equinox. I have used shield for 12 years on my Saturn Vue so I just assumed it would work on my 2018 Chevy Equinox. After I bought it I read in the manual that...
Recommended Suspension Enhancement for 2019 Jayco Melbourne on a 2018 Sprinter 3500 Chassis
2019 Jayco Mebourne motor home on a 2018 Mercedes Sprinter chassis. I am interested in the Roadmaster sway bars. There already is a bar behind the rear axle attached to the rear end and the frame. The RM 120-131 looks like it goes in front of...
Trailer Hitch and Wiring Recommendation for 2012 Land Rover LR2
I want to install a trailer hitch on my 2012 LR2 Land Rover. My questions are as follows: What hitch will work best as a bolt on where I dont have to cut the rear bumper? What electricial unit do you recommend for this vehicle. Keep in mind...
Adding a 7-Way Trailer Connector and Brake Controller to a 2008 Land Rover LR2
Im curious about what mods to make to my 08 Land Rover LR2 to get an electric brake hookup to work. Our LR2 came with a 4 prong wiring harness and we have been told that to hook up a 7 prong requires splicing and that the splicing will set...
Parts Needed to Install 7-Way Trailer Connector on 2008 Land Rover LR2
Hi, I would like to know what wire to buy to install on my Land Rover LR2 2008. Your finder tool tells me to get a 4-way flat connector, but the trailer I want to connect is a 7-way connector. Do you sell 7-way connectors for the LR2? | To install...
Roof Rack Recommendation For A 2017 Jayco Melbourne Motorhome
Im looking for a roof rack for a Jayco Melbourne Sprinter. The roof is approx 8 ft wide and has rails along the side to which it could be mounted. Do you have anything available in this size. I am looking to mount a 14ft Kayak that weights approx...
Recommended Floor Mats for 2013 Jayco Melbourne Motorhome
Do you have floor mats that fit 2013 jayco Melbourne 28f. Thank you | Based on my research, it looks like your 2013 Jayco Melbourne is built on the Ford E-450 chassis. I do recommend verifying this is as it's possible you have a different submodel. We...
Can Trailer Scissor Jacks Be Installed on Front of Jayco Travel Trailer
Can scissor jacks be installed on the front end of a jayco Melbourne | In regards to trailer scissor jacks like Leveling Scissor Jack # JSC-24-IND, these simply need to be bolted to the frame either at the front or the rear. I don't have installation...
Possible Furnace and Refrigerator Screen Fits for 2016 Jayco Melbourne Motorhome
also need bug screen for the refrigerator and heater do you have them for my Jayco? | The Camco RV Insect Screen # CAM42140 that you referenced fits the standard furnace vents made by Sol-Aire, Coleman, Hydroflame, and Suburban. I'd need to...
2011 Jayco Jay Feather Tire and Wheel Replacement Recommendation
2011 Jayco Jay Feather tire and wheel replacement Just bought this camper and prior owner thinks these tires are original so Im thinking of replacing them. They are.. ST205/75 R14 The tire says Do Not Mount on a 14.5 inch Rim Load Range...
Does the Upgraded ModuLite Kit # C59496 Come With a Dust Cover
For product: Upgraded Modulite Vehic le Wiring Harness Kit w/ 4-Pole Trailer Connector and Installation Kit Item # C59496 Does this product include a cap/cover for the 4 prong trailer wire plug? In the pictures there doesn't seem to be a cap...
Will the C59496 Trailer Taillight Wiring Harness Work on a 2008 Land Rover LR2
I have had alot of difficulty finding compatible parts for my 2008 Land Rover LR2. When searching your site it says that this product is ready to go for my vehicle. This may sound skeptical, but are you 100 certain that it is desgined for and...
What Is The Global Link Locking Baggage Lock GL34FR Made Of
Is this made of plastic or metal? I am looking to replace the 3 latches I have on my Jayco Melbourne 24l. I would like to go with the metal ones from global but the door is less than an inch thick and I believe they need to be at least 1-1/2”....
Recommended Trailer Hitch And 4-Bike Carrier For 2011 Land Rover LR2
Will Draw-Tite Max-Frame Trailer Hitch Receiver, # 75688, Fit my 2011 Land Rover LR2 HSE? And could you please recommend a bike rack which can carry 4 bikes from you ? | The Draw-Tite trailer hitch, part # 75688 will work great on your LR2....
Replacement Frame for Kwikee 26 Steps
I have a Kwikee 26 single step where the side frame has been bent in and stops the step from extending. Can a new frame be purchased or do I need to by a whole new step assembly? | I checked with Lippert and the Kwikee 26 Series step does not...
Does Canine Covers # DCL6343CH Fit a 2011 Land Rover LR2
What are the measurements of the Canine Cover? I want to protect the entire cargo area, including the back of the front seats, with the rear seats folded down. I also would like to know how much padding there is, and what type of material is...
24x64 RV Bumper Cargo Carrier Compatibility With A 2021/2022 Jayco Melbourne 24L
Will this fit on the rear bumper of a 2021/22 Jayco Melbourne 24L. I have roughly 1” gap between the bumper and the body. | You should have no issues installing the 24x64 etrailer Cargo Carrier for RV Bumper # e83YR on your 2021/2022 Jayco Melbourne...
Will the Thule Hitch Post Trailer Hitch Mount Bike Rack Fit a 2011 Land Rover LR2 with Curt Hitch
I have a 2011 LR2 and a Thule Hitching Post bike carrier for 2inch hitch left over from my last vehicle. Im looking to purchase the Curt 13052 trailer hitch and am wondering if this setup will be compatible with the proper clearance? Thanks...
Will Curt 4-Way Trailer Connector Work With 2009 Land Rover LR2?
I have read that this vehicle cannot be wired for towing because it has a CAN network protocol to transmit signals. Does this kit work on my 2009 Land Rover LR2. Do I need it programmed by a Dealer? Thank you for any assistance. | The Curt Powered...
LED Light Strip Flickering When Plugged Into 4-Way Connector on 2008 Land Rover LR2
I have a 2008 landrover lr2. Im trying to install a light strip along the bumper that plugs into my 4 pin trailer connector, but it just flashes. I know there are 7-4 way adapters that correct this, but my vehicle only has a 4 pin connector....
Filter Your Search
Contact and Help