Location of Factory Brake Controller Port on a 2007 Ford Explorer with Factory Tow Package
I cant find the brake controller port on my 2007 Ford Explorer. I have the factory tow package but I have looked under the dashboard where is supposed to be and its not there? | If you have the factory 7-way connector on your 2007 Ford Explorer...
Do You Need to use Tape to Install the Weather Tech Window Visors on a 2000 Explorer 4 Door
are these taped in.....can you remove them for a carwash i am looking for in channel none taped/removable vents for a 2000 ford explorer 4door also will this 2 peice for the 2 door fit just the front doors of a 4 door? | The 2 piece kit is...
Diagnosing Trailer Wiring Problem When Horse Trailer Lights Work With One Vehicle, But Not Another
2007 Ford Explorer w/factory tow pkg, Brenderup Horse trailer 7 Pin round plugs on each No Trailer lights at all when pluged in The Explorer works with my 7 pin boat trailer The Brenderup works with my 7 pin Suburban Trouple shooting suggestions?...
Can I Carry a 400 Lb Motorcycle On the Back Of a 2017 Ford Explorer
I installed Draw-Tite Class III hitch reciver on my 2017 Ford Explorer and I have a MaxxTow MaxxHaul Aluminum Motorcycle carrier. The descriptioin on the carrier said that I can load up 400 lbs bike on the carrier. Is it okay to load 400 lbs...
Trailer Wiring Harness Compatible with 2014 Ford Explorer
I do not have two connectors under the rear wheel well. I only have One black connector that looks like it will accept this harness, but wanted to make sure this Harness will work. | With just the one connector you referenced, the Curt T-Connector...
Recommendation for Carrying Two Bikes and Towing A Shasta Trailer Behind a Ford Explorer Sport Truck
I have a trailer small shasta and a Ford explorer sport truck. I am looking for a bick rack that can carry 2 two bikes. Something I can attach to the truck or the two hitch? I would like to keep the back open as I have a top and stor some of...
How to Convert a 5-Pole Flat Trailer Connector to 4-Pole Flat Connector
2005 Ford Explorer. I have a Boat trailer with a damaged 5 pole that I would like to convert to a 4 pole. What do i do with the Yellow/Brown wire on the 5 pole? Thanks | Some 5-Pole flat connectors use a total of 6 wires. They operate as...
How to Order Replacement Hardware for Draw Tite Hitch 75437
hello, looking for a Drawtite bolt kit # 75437F. Do you sell these ? | To order replacement hardware for the Draw Tite hitch part # 75437 what you need is the part # RHK. On the product page of this part number you'll enter the part # 75437...
Wiring for 7-Pin Round to 7-Blade Adapter
I need to be able to adapt from the 7-round pin trailer connector on a friends Prevost motorhome to 7-blade pin plug on my Roadmaster 146-7 umbilical cord that I use to connect my motorhome to my tow car. Is there a wiring diagram available...
Will Rhino-Rack Vortex StealthBar # JA7981 fit a 2013 Ford Explorer XLT
Looking to find out if this is the correct model to fit my new 2013 Ford Explorer XLT 4-door. Thanks. | According to Rhino-Rack, the StealthBars # JA7981 fit your 2013 Ford Explorer XLT as long as you have raised factory rails on your roof....
Can OEM Exhaust Hangers be Reinstalled with Curt Hitch on a 2013 Ford Explorer
Recently acquired a Curt- 13100 trailer hitch for my 2013 explorer. The exhaust hangers that come with the trailer hitch are lost, can I use the existing OEM hangers that are currently on the vehicle? If not how can I buy these exhaust hangers?...
Will Roadmaster Falcon 2 Tow Bar Work With etrailer Invisible Base Plate Kits
Will this work with Roadmaster Falcon 2 towbar? Is there any cutting of front bumper/grill? | In order to use the Roadmaster Falcon 2 Tow Bar part # RM-520 with etrailer Invisible Base Plate Kits like part # e98962 you'd need the Adapter Kit...
Recommended 7-way Connector For 2015 Ford Explorer Without Towing Package
I plan to purchase your e98867 hitch for my 2015 Ford Explorer Limited 4WD/AWD. What 7-way wiring harness and mount do I need? Do you have a wiring harness with both 7-way / 4-way connections? If not, what adapter do you have to convert 7-way...
Locating Trailer Harness Wiring Connection Points On 2016 Ford Explorer.
Under my passenger fender well, there are 2 harness plug-ins. Which one do I connect to the trailer light plugs? | I have attached a link to an installation video that shows the Curt T-Connector Vehicle Wiring Harness, part # C56172 being installed...
How to Determine if a Yakima Skybox Cargo Box Will Fit a 2016 Ford Explorer Sport Factory Roof Rack
Can this box be mounted on 2016 Ford Explorer Sport factory cross bars, with moon roof? | If the factory crossbars on your 2016 Ford Explorer Sport are up to but not exceeding 3-1/2 by 1-11/16 inches AND are spaced 24 to 36 inches apart on center...
Replacement 7-Way Trailer Wiring Harness for a 2012 Ford Explorer with Factory Tow Package
I am looking for a replacement wiring for my tow hitch for my 2012 Ford Explorer it is a limited with bliss and rear park aid. I have seen some very helpful questions asked and thought I might get some more insight as to if this would work for...
Brake Controller and Install Harness for a 2013 Ford Explorer
Hi, I have a 2013 Ford Explorer XLT 3.6L with a factory installed class III trailer hitch and 7 pin plug. I recently bought the Curt Tri Flex Brake Control #51140. The plug under the hood release wont fit the control. Is this the right plug/location....
What is Needed to Convert a 4-way to a 7-way on 2000 Ford Explorer
I have a 2000 ford explorer with the factory 4 Prong tow wiring I want to convert it to a 7 prong with trailer brakes what do I need to complete this. Thanks for your help | Basically, all you need to do is install a Hopkins Adapter 4 Pole to...
Dimensions of the C-channel on the Rhino-Rack Vortex Aero Crossbars
I own a set of kayak holders that slide with t-bolts into the c-channel of Thule Rapid Aero Load Bars. Would these holders be compatible with the Rhino c-channel? What is the size of the Rhino c-channel width at bottom/neck of channel? Thanks...
Will the Saris Swing Away Hitch Extender Work with a Mobility Scooter
Will this work on a 2016 Ford Explorer with a electric mobility scooter? | The Saris Swing Away Hitch Extender for Bike Racks part # SAR36VR will work on any vehicle with a 2" trailer hitch. It has a 250 lb weight capacity so as long as the...
How To Adapt 2015 Ford Explorer 4-pin To 5-pin on Boat Trailer
I HAVE A 2015 EXPLORER THAT CURRENTLY HAS A 4 PIN FLAT. I NEED TO GO TO A 5 PIN FLAT FOR BOAT TRAILER WITH BRAKES. WHAT APPLICATION DO I NEED. IM NOT SURE IF IT HAS TOW PACKAGE. DEALER INSTALLED REESE HITCH AND 4 PIN. VEHICLE DASH SETTINGS SHOW...
How to determine if Roof Cargo Box will Fit a 2017 Ford Explorer with OEM Crossbars
I am looking for a cargo box that will fit on the fixed cross bars of a 2017 Ford Explorer. | I can help you find a roof cargo carrier for your 2017 Ford Explorer, but you will need to do some measuring on your end to ensure it will fit and...
Rooftop Bike Carrier That Does Not Require You to Remove Your Bikes Front Wheel
Do you have any variations where you dont have to take the front wheel of the bike rack? | Yes, there are rooftop bike carriers available that do not require you to remove the front wheel. The Rhino-Rack MountainTrail Rooftop Bike Carrier #...
Trailer Hitch With Minimal Fascia Trimming Availability for 2020 Ford Explorer
Looking for a hitch for my 2020 Ford Explorer 4cyl. Is there any hitch where I don’t have to cut the rear bumper plastic? Thanks | All the hitches available for the 2020 Ford Explorer would require trimming the fascia in similar fashion. Of...
Filter Your Search
Contact and Help