Parts Needed to Flat Tow a 1986 Toyota 4Runner with a Demco Excalibur Tow Bar
Have a Excalibur tow bar and need a baseplate for my 86 4 Runner 4x4,rig is a 2015 four wind 28z | We do have a Roadmaster Towbar Adapter, part # RM-032, that will adapt your Demco Excalibur to Roadmaster base plate kit part # 1123-1 that has...
Recommended Replacement Ball For Friction Sway-Control System
I have a reese friction sway control 83660, I am looking for the ball that goes on the receiver, is it available by itself? | The replacement ball you can use with the Reese Friction Sway Control Kit, part # 83660 is part # RP58060. This is...
What is the Inlet and Outlet Diameter of MagnaFlow Spun Stainless Catalytic Converter Part MF54956
whats the in/out size of this cat? | The inlet and outlet diameter is 2-1/2 inches. This Catalytic Converter is 49-state approved. It is not approved in California. |
Recommended Replacement for a Magnetek Model 6325 Converter
Hi, I’m looking for a converter replacement for my 1986 Toyota dolphin. I read the thread and wanted to order a replacement for 6300 A model 6325 | It looks like there actually isn't a direct replacement for your Magnetek series 6300A Model...
Comparing Trailer Hub and Drum Assembly # 8-173-16UC3 with # 8-276-5
Even though both the 8-173-16UC3 and 8-276-5 7 inch drums indicate they can be used with the 23-47 and 23-48 electric brake assemblies, the 8-276-5 drums indicate they can be used with 1-3/4 brake shoes, while the 8-173-16UC3 drums say only...
Can Journey Hyndsight Observation System # JVS-EW See in Low Lighting
What is the low light operational capabilities of this camera? What is the lowest light level images will be viewable on this system? How dark until images are not viewable? Thanks.. | I tried to get more info on the low light capabilities...
4-Way Trailer Wiring Replacement Recommendation for 1986 Ford F-150
I have a 1986 f150 and the connector for the tail lights broke from corrosion. I am wondering if this is the part I need in order to reconnect my trucks tail lights to the harness connector that runs from the cab to the bed. | For a 4-way trailer...
Correct Grease Seal for Trailer with L44649 Outer and L68149 Inner Bearing
Hi, Im trying to find the correct grease seal for my boat trailer. The outer bearing is L44649 and the inner bearing is L68149. The grease seal doesnt have any markings that I can find. The outside dimension is 2.327 and inside is 1.662....
Front Hitch for 1986 Ford F-350
Will this hitch fit the front of my 86 F350 2 wheel drive, crew cab dually ? | The B&W Heavy-Duty Trailer Hitch # BWHDRH25122 that you referenced is confirmed to fit your 1986 Ford F-350 Dually, but it's designed to install onto the frame...
Truck Bed Bike Rack Recommendation for a 1986 Toyota Pickup
Will this work on my 1986 Toyota pick up truck. My bed is flush in the inside and the exterior has the lip. Its the reverse of what the new trucks are now where the lip is in the inside of the bed. | I may have an option that will work for...
Trailer Wiring Harness for a 1986 Toyota Truck with LED Tail Lights and Fixing Hyperflash
I recently purchased the hoppy 5 wire to four flat converter. I have a 86 toyota pickup which i removed the bed to add a custom flatbed . I have Led lights with a ground, signal wire and stop/tail. I spliced on the left side and tapped the right...
Will DeeZee Running Boards DZ3700301 Fit a 1986 GMC C/K 3/4 Ton Regular Cab
I have a 1986 3/4 ton GMC pickup. It is 2 wheel drive, standard cab, will these DZ3700301 steps fit my pickup? The add says they are no drill installation. | We checked with DeeZee and the Running Boards part # DZ3700301 that you referenced...
Choosing Proportional or Time Delayed Brake Controller for Truck with Manual Transmission
My truck is a manual transmission, am I better to go with a time-delayed controller as opposed to a proportional controller? My reason for asking is with the proportional, will the brakes on the trailer be applied every time I let off the gas...
Is There a Thule Van Ladder Rack That Can Be Drilled and Bolted To a Roof
I have a 1986 Volvo wagon 240 series. Power house car! I use it to haul lumber and just recently broke the roof rack. I need a roof rack that I CAN drill into the roof that hold up to 500lbs of lumber. I would like the adjustable Thule TracRac...
Will the Replacement Master Cylinder Assembly # T4749501042 Work on a Cronkhite Trailer
this looks like an exact match for my cronkhite trailer master cylinder, it has drum brakes. it has the numbers 23744 on the side and so does this item and so does the one for drum brakes but my unit looks like this part. | If the master cylinder...
Distance from Frame to Top of Receiver for Hitch 41001 on a 1986 Chevy C/K Pickup
86 chevy k20 Scottsdale reg cab 8ft box step bumper, I watched your video and it said top of receiver was 21inch off ground, must be different tires than mine, I have 19 1/2 off ground to under bumper, any way what is the measurement from frame...
Will the Rampage Padded Center Console Interfere with Folding Rear Seat Back on 1986 Suzuki Samurai
Does it interfere when you fold the back seat out of the way? | The Rampage padded center console # RA34023 for the 1986 Suzuki Samurai is not supposed to interfere when folding the back seat. But if you go by its measurements you can determine...
Can the Pintle Hook Mount part # 63057 Be Used in Rise and Drop Position
Can this be mounted either way as in to lower the ball or to raise the ball? | Yes, you can use the Pintle Hook Mount part # 63057 in the rise or drop position. For a pintle hook and ball combo with a 2-5/16 inch ball you would want the part...
Availability of Lowers Doors Compatible with the Bestop Element Upper Doors on 1985 Jeep Scrambler
B5179515 Do you sell the lower doors that these uppers slide into? 1985 Jeep Scrambler with steel door pin striker. | We do offer some of the Element doors that the Bestop Element Upper Doors # B5179515 are designed to fit into. There are...
Using an Anti-Sway Accessory on a Swagman XTC-2 2-Bike Platform Rack
Will your anti sway accessory fit on my Swagman 2 bike platform bike rack 64670 XTC 2 | For your Swagman XTC-2 2-Bike Platform Rack, # S64670, the rack comes with a threaded hitch pin that should keep the rack secure and limit the movement...
Will the CIPA Universal Door Mount Mirror # CM45000 Fit on a Motor Home
Can these mirrors be used on motor home | The CIPA Universal Door Mount Mirror, # CM45000, can be used on any application that you choose. They were primarily designed to be used as towing mirrors on GM trucks and vans, but the universal design...
Titan Boat Trailer Brake Lockout Actuator for Reversing Up an Incline
I have a titan model 6, 8,000 gvw, 800 lb. Tongue weight. and have to back boat up a slight incline into garage. I cannot find a manual lockout. What do I need to buy to install the manual override. | In order to back your boat trailer up an...
How to Order Replacement Hitch Install Hardware for Curt Trailer Hitch
Greetings! Is there any chance I can purchase a complete installation kit for a Curt C11705 trailer hitch? I have the hitch but NONE of the hardware needed to install it on my 1986 Corvette. I tried contacting Curt but they are not getting...
Where Does the Roadmaster Base Plate part # 1003-1 Install on a 1986 Suzuki Samurai
1986 suzuki samuria the instructions for the baseplate 1003-1 does not mention the front bumper? does the baseplate go behind the bumper and the attaches to a tow bar? | The Roadmaster base plate kit part # 1003-1 that you referenced attaches...
Filter Your Search
Contact and Help