Replacement Igniter and Burners for a Furrion 3-Burner Stove
Hello im looking for a few items for a furrion 3 burner stove top igniter and the 3 igniter wires Furrion part numbers are C-FSRE21SA-020///IGNITER C-FSRE21SA-004///L.H BURNER C-FSRE21SA-005/MIDDLE BURNER THANKS | We do have the replacement...
Recommended Towing Mirrors for a 2002 Mercury Mountaineer
I have a 2002 Mercury Mountaineer 4.6. Can you tell me if you have towing mirrors you can recommend. I have the lights on the bottom of the mirrors but would like to use the slip on towing mirrors. Is there anything I can do to modify them to...
Can a 2002 Mercury Mountaineer Carry a 350 lb Scooter Using an Adapter on a 1-1/4 Inch Trailer Hitch
Can I mount a rack with a scooter on a 2002 mercury mountaineer 4.6 v8? Its probly about 350lbs at least? I have a 1 1/4 inch hitch with a 2inch adapter? | In order to carry a scooter on your 2002 Mercury Mountaineer your vehicle will need a...
Replacement Slipper Spring for Boat Trailer 1000-lb Axle
The spring that I took off of the trailer measures about 25 and 1/4 inch. and 1 and3/4 in. wide, The bolt hole measures 1/2 inch had a 1/2 inch bolt. This looks like the 24 and 1/4 inch slipper spring for 1000 lb axle. It says that the bolt...
Can Front Hitch Installed On Motorhome Carry a Cargo Carrier
I have a 2004 e350 motor-home I installed your front receiver hitch What if any concerns are there putting a cargo rack on the front instead of the rear of the unit? | You'd most likely just need to be aware of the carrier on the front of the...
Parts Needed to Tow a Trailer with Brakes Using a 2002 Mercury Mountaineer with Factory 4-Way
I currently have a 2002 Mercury Mountaineer with a class 2 hitch and standard 4 pin trailer harness. What is the quickest way to convert to a 7 pin harness with a brake controller. I think I have a broken wire from my 4 pin back to the harness...
Roof Kayak Carrier Recommendations for a 2005 Mercury Mountaineer
I have a 05 Mercury Mountaineer V8 and 2 kayaks. Can I use two sets of the carrier ? One set on each side of the suv. If using only one set, its a pretty far reach for me to tie one kayak to the back side of the carrier, while the front side...
Will CTM2200A Towing Mirrors Fit a 2000 Mercury Mountaineer With Courtesy Lights
Will your custom trailer mirrors work? | If the courtesy lights on your 2000 Mercury Mountaineer are located beneath the mirror face, towing mirrors # CTM2200A will not be able to slide on. You are able to view the mirror housing styles the...
2 Inch Hitch For 2003 Mercury Mountaineer With 1-1/4 Inch Hitch
I am looking at buying a 2003 Mercury mountaineer V8 that has a factory 1 1/4 inch receiver on it. I need to tow a boat with this vehicle. Is it ok to use an adapter to step the 1 1/4 up to a 2” reciever? Please advise ! I am a loyal customer...
Can a 250 Pound Honda Scooter Be Carried on the Back of a 2006 Mercury Mountaineer
I have a Mercury Mountaineer 2006 with 2 inch hitch but I think that is class 2. Can a Honda Elite 1994 scooter estimated weight is 250 lbs be carried on this rack safely? Any recommendations. | I have heard from other customers that Ford/Mercury...
Comparing Timbren Front Helper Springs for a 2000 Mercury Mountaineer AWD
Currently having a bull bar/winch plate being made out of 1/4inch steel for a 2000 Mercury Mountaineer. Best guess the combined weight of metal and winch will be about 200 - 250 lbs. I realize the 1,000 lb suspension would obviously be more...
Can Draw Tite Hitch for 2000 Mercury Mountaineer be Used with Weight Distribution System
Can you use weight distribution bars with this hitch on a 2000 Mercury Mountaineer? | Yes, the Draw Tite hitch part # 75096 which fits your 2000 Mercury Mountaineer is rated for use with weight distribution systems. The best way to pick out...
Installing Fuse Holder on Battery in Trailer Wiring Harness 118345 for 2000 Mercury Mountaineer
I have a 2000 mercury mountaineer and bought the 118345. I do not understand the instruction saying to connect the fuse holder to the battery. How do i do this? | The yellow fuse holder starts out as a closed loop. You will need to cut it in...
Does a 2004 Mercury Mountaineer have the Capacity to Tow a Chevy S10 on a Tow Dolly
can a 2004 mercury mountaineer premier with tow package that came with the suv it has a 1 1/4 inch receiver will it be able to pull a1990 s 10 pick up on a tow dolly | Probably but you will want to consult the vehicle owners manual to determine...
Brake Controller Installation Recommendation for a 2010 Mercury Mountaineer
2010 mountaineer class 3 hitch installed by Curt. Put a 7 pin wire plug in. Purchased the factory wire harness plug from the brake Prodigy. Do I need to run the wire from the brake controller to the 7 pin Wire plug. Or did Mercury install...
Trailer Hitch Information For 1999 Mercury Mountaineer
Given to me as gift years ago ! Draw-Tite Trailer Hitch #????. On 1999 mountaineer awd 4dr 5.0v8 Weight distruing 7500, Max tq 750, Weight carrying ball mount 5000,...
How to Install a Prodigy P3 Brake Controller in a 2004 Mercury Mountaineer with Factory 4-Way
My 2004 Mountaineer is equipped with the 4 way connector and the small hitch from the factory. What would I need to convert to the round 7 way plug to utilize electric brakes on trailer? What wiring would I have to install if any on Mountaineer...
Can The Draw-Tite Ball Mount, # 36065, Be Turned Over And Used As A Drop On a Mercury Mountaineer
Merc Mountaineer with a 1 1/4 receiver, towing a small trailer for a Quad, because the Merc is high, need a , another part offers both a rise and but is 10$ more plus need a pin with that order....... | A 1-1/4 inch hitch receiver is either...
Will the Equal-i-zer Shank # EQ90-02-4800 Work with the Equal-i-zer # EQ37121ET Hitch?
I want to know if EQUL-I-ZER Weight distribution hitch, part number, EQ37121ET, Will fit 2 1/2” shank part number, EQ90-02-4800. | Yes, the Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200 lbs TW #...
Brake Controller Recommendation for 2008 Mercury Mountaineer
Hi, We purchased a new Casita 17foot RV that we pick up next year. We are towing with a 2008 Mercury Mountaineer with the already installed Tow package and 7 pin hookup. But we were told we should also get a Brake Controller also for the...
Parts Needed to Install Brake Controller on 2007 Mercury Mountaineer
Hello, I have a 2007 mercury mountaineer premier v8. It has a 1 1/4 hitch in the frame with a flat 4 wire connector. I have a class 3 hitch that I am installing underneath the existing class 2. I need to switch to a 7 wire connector as well....
How Sturdy Is The Mount On The MaxxTow Off-Road Driving Lights?
How sturdy is the mount on this light? | The mount on the MaxxTow Off-Road Driving Lights # MT80637-2 itself is very sturdy. It is intended/designed for off-road driving conditions where the idea is durability. These lights can mount well...
Towing Capacity of 2004 Mercury Mountaineer with a Weight Distribution System
I have a 2004 Mercury Mountaineer AWD 4.0L V6 with a factory installed 1.25inch hitch receiver. I am wondering if I can tow a 4500lb camper with a weight distribution hitch OR do I need to add the 2 inch hitch receiver to the Mountaineer? |...
Should Disc Trailer Brakes be Added to Front or Rear Axle on a Boat Trailer
I have a tandem axle boat trailer, its an EZ Loader trailer without brakes. I believe its capacity is 4100 lbs. I have a Starcraft 22 ft aluminum hulled boat that I have towed for many years. I want to add disc brakes, can I just install...
Filter Your Search
Contact and Help