Replacement Igniter and Burners for a Furrion 3-Burner Stove
Hello im looking for a few items for a furrion 3 burner stove top igniter and the 3 igniter wires Furrion part numbers are C-FSRE21SA-020///IGNITER C-FSRE21SA-004///L.H BURNER C-FSRE21SA-005/MIDDLE BURNER THANKS | We do have the replacement...
Transmission/Engine Oil Cooler Recommendation for a 2009 Suzuki Equator
Im looking for a heavy duty trans cooler for Suzuki equator 09 with v6. Same as a Nissan frontier. Also, is there a combo oil and trans cooler that would work. thanks | The best way to pick out a transmission cooler is to measure the area in...
Can Front Hitch Installed On Motorhome Carry a Cargo Carrier
I have a 2004 e350 motor-home I installed your front receiver hitch What if any concerns are there putting a cargo rack on the front instead of the rear of the unit? | You'd most likely just need to be aware of the carrier on the front of the...
Are Relays Needed to Activate Tow Package Wiring in 2012 Suzuki Equator
For the 2012 suzuki equator, I already have the 4 pin connector attached in the rear, but I dont recall installing a relay kit inside the truck. I havent had to use it yet, however in am picking up a new trailer during the week. I hooked a test...
Trailer Wiring Harness on 2012 Suzuki Equator is Not Working
i purchesed a wireing kit # 56087 when installed on my truck as per directions the trailor lights wont work nor the turn signals, for turn signal to work i must take out bulb turn off signal turn back on reinstal bulb and signal will work untill...
Back Up Alert Recommendation for a 2010 Suzuki Equator with a # 921 Reverse Lamp Bulb
Will it fit my 2010 Suzuki Equator Nissan Frontier existing bulb #921 18vots | The Hopkins Backup Alert, # HM20101VA, is designed to replace a # 3156 bulb and will not replace the # 921 bulb on your 2010 Suzuki Equator. Instead, I would recommend...
Trailer Wiring Recommendation for a 2012 Suzuki Equator
will this product fill 2012 Suzuki equator without towing package? | We do have a wiring harness designed for your Equator but I spoke with my contact at Curt Manufacturing and found that the custom fit wiring, # 56087, is not recommended for...
Will the Equal-i-zer Shank # EQ90-02-4800 Work with the Equal-i-zer # EQ37121ET Hitch?
I want to know if EQUL-I-ZER Weight distribution hitch, part number, EQ37121ET, Will fit 2 1/2” shank part number, EQ90-02-4800. | Yes, the Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200 lbs TW #...
Troubleshooting Trailer Brakes that Lock Up when Trailer Wiring is Connected
Help. 7 way connector works well except it applies brakes as soon as it is plugged in 2012 Suzuki Equator sport 4 door 4wd Curt venturer trailer brake shows single green light when brake is touched or manual slide moved, whether trailer plugged...
What is the Length of the Suzuki Trailer Hopkins Wiring Harness part # HM43575?
How long is the wiring end to end on this item? Item # HM43575 | The Hopkins wiring harness item # HM43575 has a length of 45-1/4 inches for the wiring alone and the overall length including the plugs/adapters end to end is 48-1/8 inches. |
Tap To Clean Weld Nuts Inside Frame On a Suzuki Equator
the holes in my frame are very rusty, I guess I need a12m x1.25 tap to clean them up. do you sell them? | Yes, we have the 12 mm x 1.25 Tap and Drill Bit part # PTW8662 which can be used to clean the weld nuts inside the frame when installing...
Should Weight Distribution be Set Up Before or After Inlflating Air Lift 1000 Springs on Ram 1500
I just installed the Airlift 1000HD AirBags. I am wondering when should I inflate the bags. Before Hitching? After hitching, BUT before setting the weight distribution bars? Or after hitching AND setting the weight distribution bars? | Thank...
Curt Trailer Wiring Harness Recommendation for a 2011 Suzuki Equator
how can I tell if my suzuki equater will accept the118263 harness? I DONT KNOW IF IT HAS THE TOW PACKAGE. | The Curt Custom Fit Vehicle Wiring # 56087 that you referenced will work on your Suzuki Equator even if you do not have the tow package....
Ball Mount Recommendations for a 2011 Suzuki Equator
which is the common ball mount for this truck. | The recommended ball mount for the hitches for the 2011 Suzuki Equator is a Ball Mount # AMSC2. The etrailer.com Ball Mount Kit # 989900 that you referenced includes the # AMSC2 as well as a...
Upgraded Equalizers and Shackle Straps for a 2017 Eclipse Attitude 5th Wheel Toy hauler
I have a 2017 Eclipse Attitude 5th wheel toy hauler. My current equalizer is stamped 13-104 on one side. It has 2 7000# axles and axle spacing is 33. What would I use as an upgraded shock absorbing equalizer. Equalizer bolt is 3 x 9/16th...
Troubleshooting Trailer Brakes That Stay Locked Up
I have a 2009 Suzuki Equator Made by Nissan and I am having the same problem with the constant 12v going thru the blue wire. We did the switching of the blue and black wires but it seemed to not let me have brakes. My brake controller still...
Where Should the Converter Box be Mounted on a 2011 Suzuki Equator Trailer Wiring Harness
Where do i mount the light receiver on the Suzuki bumper? | If you look at the instructions, linked for you, for the CURT Wiring Harness, # 56087, they have attached the converter box to the frame rail on the 2011 Suzuki Equator. You will want...
Does the Trailer Wiring Harness # 56087 Require the Factory Tow Package on a 2011 Suzuki Equator
Does this part require the factory tow package wiring prior to installation to work? | The CURT Custom Fit Trailer Wiring Harness, item # 56087, does not require the factory tow package for installation. This harness plugs inline with the existing...
Recommendation On Equal-i-zer Weight Distribution HItch
I want to know if EQUL-I-ZER Weight distribution hitch, part number, EQ37121ET, Will fit 2 1/2” shank part number, EQ90-02-4800. | When it comes to The Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200...
Will T5 LED Light Bulb DI43VR Replace Fluorescent Bulb
I want to replace the existing fluorescent. Currently I have a Philips F8T5 installed. Pin to pin length is 11 7/8. Distance between pins is 1/4. Will this work for me? Also, I have read that some led replacement bulbs can fry the ballast....
Color Options for LED Adjustable Reading Light for RVs
Does it come in a brass or gold type finish? | The LED Adjustable Reading Light for RVs come in silver part # CE46FR and black part # CE66FR but these are the only color options. |
Comparing Curt Wiring Harnesses for a 2011 Suzuki Equator
2011 suzuki equator without trailer package. so my reading notes i would need the #56087 wiring harness. what is the different in #56087 and C56225 harness. thanks | The Curt trailer wiring harness, # C56225, works and installs more like the...
Troubleshooting Non-working Running Lights on a Trailer Being Pulled by a 2012 Suzuki Equator
2012 Suzuki equator 4wd. It has trailer oem trailer wiring and I plugged in the wiring harness from U-Haul but I do not have running lights. I have turn signals, emergency flashers and brake lights but no running lights. I have been using...
Equalizer Upgrade Kit For 2018 Eclipse Attitude 5TH Wheel Toy Hauler
I have a 2018 Attitude 32sag. I want to upgrade the shackle suspension set up. I dont have much space between my axles 33. They are 7,000-pound axles. Will these fit? Thanks | The Dexter E-Z Flex Suspension Kit # K71-653-00 is designed for axles...
Filter Your Search
Contact and Help