Bike Rack Recommendations for a 2009 Pontiac Vibe
I have a 2009 Pontiac Vibe. Will this fit? Do I have to worry about scratches on my car? Is it easy to install? I mean, can I do it? Also is there a securing device so it would not be stolen from my vehicle? | I checked with Thule and...
Parts Needed to Add Electric Drum Brakes to a Trailer and Brake Controller for 2007 Pontiac Vibe
hello I have a 1994 aliner sport model. I would like to install electric brakes. the trailer is only 800lbs. when loaded it can be hard to stop, with a small car. It has al-ko axle. it also has the 4 bolt flange installed. the tires are...
How To Install Roof Platform Tray On a 2018 Nissan NV 2500 High Roof
Looking for compatible roof rack system for a 2018 Nissan NV 2500 3DR High Roof. Was interested in using the Rhino Rack Pioneer Platform but would be amenable to other options. If the pioneer Platform - what Rhino Rack connectors would I need...
Which VanRun Mat Fits 2014 Nissan NV 2500 and Can Slits be Cut for Seat Locks
Will the mat below work with our 2014 NV2500 passenger van with the longer wheelbase? Also, can we cut out the slits for the seat locks? We only have the seats in the vehicle 3-4 times per year as we mainly use it for deliveries. Thanks. VanRug...
Recommended Trailer Hitch Receiver and Cargo Carrier To Secure a Generator On 2021 Nissan NV 2500
Have a 2021 NV2500 Nissan 6cyl. Its a high roof van. No trailer to tow ever! Its a cargo van for personal used. Only items I was looking for was a tow bar, extension high/low bar, and a cargo carrier basket with side rails more than 5.5 inches....
Recommended Trailer Wiring Harness for a 2009 Pontiac Vibe
Hello, I have a 2009 Pontiac Vibe and have the Curt hitch installed. I need hitch harness for my utility trailer to operate the signal light. I see that there are two kind of hitch harness. Which one is recommended? | There are 2 options...
Will Solera 12V Power RV Awning Conversion Kit Easily Replace Dometic Kit on RV
Hello, Im looking at converting my manual awning to electric. My current awning doesnt have the metal pieces that have to be bolted to the side of the trailer like this one. Im just worried that there may not be studs vertically where these...
Installation of Tekonsha T-One Wiring Harness On 2006 Pontiac Vibe
the wiring I got for the trailer hitch for my 2006 Pontiac vibe one of the connectors is different on the passage side. Its 3 pin for the light and the connector with the kit is 2 pin for that side. did you send me the wrong wiring harness?...
Why Does the 2009 Pontiac Vibe Require a Modulite
I am getting ready to install a hitch and wires on my 2009 Pontiac Vibe not a Gt its AWD. I have found multiple ways to rig the wire system. The harness number 118460 looks the most convienient. My question is why do you have to run the cable...
What is the Correct Curt T-Connector Vehicle Wiring Harness for a 2005 Pontiac Vibe
I ordered a wiring harness for my 2005 Pontiac vibe. Curt #56186. Package says it will fit a Kia forte. Will it also connect to my car, or did I order the wrong one? do I need to return it? | The correct Curt T-Connector Vehicle Wiring Harness...
Does Conical Washer 01292-008 Fit Curt Hitch that Fits 2007 Pontiac Vibe
Will your 1/2 inch conical toothed washer fit the 12 mm bolt for my Curt trailer hitch on my 2007 Pontiac Vibe? Thank you. | Yes the Reese conical washer part # 01292-008 will work with the install hardware of the Curt hitch # C12221 that fits...
Can an Aftermarket Mirror Add New Functions to a Vehicle
Is this mirror truly plug and play? My existing vehicle does not have heated mirrors but is power. Website does not specify. Thanks | When installing an aftermarket mirror product like # KS68123-24N on any vehicle the vehicle must be already...
Adapting 1-1/4 Receiver Tube For 2 Hitch Accessories - 2004 Pontiac Vibe
If I buy your class 2 hitch for my 2004 pontiac vibe do you have an adapter to bring it up to 2that will fit. I have a class 3 on my 2008 Subaru and I want to make them universal | Yes, it is possible, with certain exceptions. The Tow Ready...
Crosstube Dimensions on the Draw Tite Hitch 24812
Can you tell me the height of the cross tub? | The crostube on the Draw Tite hitch part # 24812 measures 1-1/2 inches tall and 1-1/2 inches wide. |
Receiver Height For 2009 Pontiac Vibe and Parts Needed For Trailer Towing
Im trying to pick the correct / rise bar for my Pontiac Vibe. The recommended part is C45521, but to double-check Id like to know the height off the ground of this receiver when installed. Do you have this information? Thanks | With the Curt...
Leaf Springs and Shackle Straps for Triple Axle Trailer with 7-3/4 Inch Equalizers
Hello. I seen a post that you answered with detail and I am hoping you can help me. I installed 3 5200 axles with 7000 lb. leafs and equalizers. Some thing is wrong. The center axle is shifting towards the rear and the equalizers are hitting...
Hitch Balls that Fit Curt Ball Mount # C45521
I bought this from you, but bought the wrong ball for it. Which ball fits this? Curt Class II Drawbar - 2-5/8 Rise, 3-1/4 - 7-1/4 Long - 3,500 lbs | For the Curt ball mount # C45521 you mentioned you'd want the part # A-82 for a 2 inch ball...
Parts Needed to Flat Tow a 2005 Pontiac Vibe
What bar and brackets do I need to flat tow my 2005 Pontiac Vibe 2700# | For a base plate kit for your 2005 Pontiac Vibe the Roadmaster XL part # 3130-1 has been confirmed as a fit and would work well. In addition to the base plates, you will...
Base Plate and Tow Bar Setup for Towing a 2003 Pontiac Vibe Behind a Motorhome
I want to purchase a tow bar and base plate for a 2003 Pontiac Vibe front wheel drive manual trans to pull behind a motorhome. The motorhome has a 2 receiver. What products will be compatible with this vehicle? Thanks! | I would recommend...
Will the Thule Outbound Cargo Bag Fit a 2005 Pontiac Vibe
I bought a used one from eBay, but am afraid my cross bars are not far enough apart. I am pretty sure they are less than the 36inch another Youtube video recommended. Will this fit a narrower spread? thanks | Having the cargo bag, # TH868, between...
How to Use the Curt Echo Trailer Brake Controller on a 2018 Nissan NV 2500
Im using the T-one vehicle wiring harness, which will give me a 4 way connector. I also bought the Hopkins 4 flat to 7 blade conversion harness. This gives me a 7 way connector to use with the Curt Echo This vehicle does not have a tow package....
Availability of Bike Rack for 2005 Pontiac Vibe
I need a bike rack for my 2005 Pontiac Vibe. | We have many bike racks that will fit on a 2005 Pontiac Vibe. The two different styles would be a trunk bike rack and a hitch bike rack. The trunk design bike rack will use straps to clamp to the...
Propane Tank Cover for 20 lb RV Propane Tanks
I was originally looking for a 20# double rv propane tank cover. After a few searches it seems they are rare. Any thoughts are appreciated. Thx | The # CAM40532 propane tank cover will work with a pair of either a 20-lb or a 30-lb steel propane...
Recommended Trailer Brake Controller and Wiring for 2005 Pontiac Vibe
I have a 05 Pontiac Vibe I need to wire it up to tow a pop up camper that has electric brakes so I will need a brake controller. Just not sure what I need.... The standard harness plus the Universal Installation Kit for Trailer Brake Controller...
Filter Your Search
Contact and Help