!Outback Wagon  x   >   !Seaflo  x   >   !114SD  x   >   AirrForce  x   >  

I have the 42 in fan without the light. Will this bracket be the same? | According to the manufacturer the # 277-000399 replacement brackets will probably work for a AirrForce 42" hugger-style 4-blade ceiling fan without a light. They said they...

I have a rv celling fan thst is in a 2019 385 rb montanaa hight country the mounting hardware that attached to the paddle and to the fan motor broke need a replacement do you have the metal mounting bracket? | It looks like you need the...

Traveling back to Canada via Highway I-5 the road is so rough and bumpy that one of our AirrForce 42 cherry colour blades broke while hitting one of the slides in our DRV Mobile Suites. | I do have an option to replace the fan blade on a...

I need to replace the glass light cover on my fan model 42HGF4B2EW do you have replacement cover | Your fan model 42HGF4B2EW is listed the AirrForce 42" Hugger Style RV Ceiling Fan with Light Kit # 277-000081 on our site. We do have the replacement...

I have a 2013 Open Range Mesa Ridge 337RLS fithwheel. I am looking for replacement blades for my ceiling fan but cannot find a manufactures name on the fan or in the paper work that came with my RV. My Blades Measure 4 1/8inch wide at the narrowest...

What size and type screws does it use.. where can one purchase those? Aslo, the screws for the blades.. what size and type are they? | The Replacement Hardware Pack for AirrForce 42" Hugger Style RV Ceiling Fan # 277-000408 comes with 12 fan...

Hi, my bracket mounting screws measure approx. 1-1/2” Center to center at the motor, and 3.43” center to center screw holes at the width of the blade with 3.85” wide bracket width on blade. Brushed nickel. Are these correct for mine? | The...

Do you sell 120 V chrome or nickel finish ceiling fan for low ceilings | We have a ceiling fan that will work great for you. I recommend the Airrforce Hugger Style RV Ceiling Fan # 277-000084. This is a 42 inch fan with a brushed chrome finish....

AirForce 42inch ceiling fan # 277-000081 . I am ordering this and liked the idea of a wall switch llight dimmer, and can the fan speed be incrementalized from on a dimmer switch too ? Would i find this separated wall switch easily in 110 volt...

If my rv runs on 30amp power supply Can I run a 110 v regular house type fan on the wires that are currently there? Has a blue and a white wire The old motor says 12v dc 15amp The old fan was 12v but also ran off the generator ? | Sounds...

In am looking to replace a broken fan blade do you carry the replacement blade for this fan. | Yes, the correct fan blades for the 42" Hugger Style RV Ceiling Fan for RVs part # 277-000084 are the Replacement Blades for AirrForce 42 Hugger Style...

Is there a specific reason that I need to purchase a fan specifically for an RV? | The main differences you'll find between your usual residential fan and a fan intended for use in an RV like the # 277-000086 RV Ceiling Fan from AirForce is...

Can the ceiling light be removed and fan installed in its place? | It depends. There are mounting boxes for most celling lights and fans, such as # 277-000083, designed to support the weight of the fan or light. Some lights are not heavy enough...

The fan and blades are fine, however, the bracket that holds the blade to the fan broke. Can I just purchase the brackets as it seems wasteful to replace the whole unit when nothing is wrong? | Yes, you can replace the brackets on 42" Hugger...

What is the distance from the ceiling to the tip of the blade? My slide hits my current fan when it comes in. | From where the 42" Hugger Style RV Ceiling Fan with Light Kit for RVs # 277-000081 touches the ceiling to where the top of the blade...

does any one make a plastic version of this globe? | The correct replacement dome for a 42" Hugger Style RV Ceiling Fan is the Replacement Glass Dome for AirrForce 42" Hugger Style RV Ceiling Fan part # 277-000389 which is made of glass. The...

is it possible to get this ceiling fan and use an led bulb in it for more light | Yes, the 42" Hugger Style RV Ceiling Fan # 277-000083 that you referenced will use standard ceiling light bulbs found in your house for which there are replacement...

I need a blade for this fan. Can you help? 42inch Hugger Style RV Ceiling Fan with Light Kit for RVs - Brushed Chrome Item # 277-000081 | What you are looking for is the Replacement Blades for AirrForce 42" Hugger Style RV Ceiling Fan # 277-000398....

Good morning. I have the 42” hugger ceiling fan. One of the brackets broke, which I have in my cart to purchase need black. My fan does not have the light fixture on it and I’m Wanting to add that. Which ones can I put on the fan. | If you...

hi do the black matt blades come in 17in. | The overall length of the Replacement Fan Blades for AirrForce 42" Hugger Style Ceiling Fan # 277-94444 that you referenced is 16-5/8 inches. |

What are the measurements of #277-000398 fan blades? | I measured the Replacement Blades for AirrForce 42" Hugger Style RV Ceiling Fan # 277-000398 for you and they are 16- 5/8 inches long with 4 inches wide at the bottom and 4-7/8 inches wide...

Hi. Are these brackets available in flat black? Replacement Brushed Chrome Brackets for AirrForce RV Ceiling Fan with Light - Qty 4 Item # 277-000399 AirrForce | We do offer the ceiling fan brackets # 277-000399 in Chrome. Unfortunately we...

Hello, I have the 2018 artic wolf fifth wheel 315tbh8, and it has the three blade 42” hugger ceiling fan. I’m looking for the replacement fan brackets and blades for it, the fan still runs just need blade components, thank you for your time....

I have a really nice 40foot diesel pusher motor coach and I want to install a ceiling fan in it . I would like a smaller diameter then 42, perhaps 36. I believe the measurement is across from blade to blade tip, please confirm thats how they...