Tool Box Recommendation for a 2006 Mitsubishi Raider That Fits Below the Rails
I need a tool box for the bed if my truck but I want it to fit comfortably inside I dont want it showing | I have found several toolboxes that will fit your 2006 Mitsubishi Raider, however, the DeeZee Toolbox # DZ8748HDS is not one of them that...
Can Weather Tech Bug Shield Survive Going Through Car Wash
Will I be able to go through the car wash after its in place. | Yes, the Weather Tech Easy-On Stone and Bug Shield Deflector # WT50150 that you referenced is sturdy enough and mounts sturdy enough to survive going through a carwash. |
Install C59496 on 1998 Cadillac Seville
hi, i purchased a wiring kit from you i have a 98 cadillac seville and was hoping you can tell me which wires are for brake lights turn signals running lights etc.. is it the same colors as on your wires on the kit? thanks for your help | US...
Install Instructions for GloLight LED Trailer Tail Light
Hello! Can you provide install instructions? | To install the GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 32 Diodes - Round - Red Lens # STL190RB you just need to match the wires by color or function. On the light: white...
Trailer Wiring Harness Recommendation for a 2007 Mitsubishi Raider
I need to add a 7 wire harness to my 2007 Mitsubishi Raider pick up so I can pull a small camper. The truck does not have a factory wireing harness for towing. Which harness would be the best for me to use. | For a 4-way wiring harness recommendation...
Does Trailer Wiring for 2007 Mitsubishi Raider Sense Varying Voltage for Brake Light Activation
I have a few questions about the 118323 combined lights and brakes 4 way connector harness for my 2007 Mitsubishi Raider. 1. Is the brake lights intensity changed based on the amount of power going to the brakes? 2. Description indicates that...
Is Drilling Required to Install a Trailer Hitch on a 1999 Cadillac Seville
1999 Cadillac Seville, do I have to drill holes for this installation? | Drilling is actually not required to install Curt trailer hitch # C12265 on a 1999 Cadillac Seville. However, there is fascia trimming required. I have included a link...
Can One 50 Pound Bike be Loaded on a Trunk Mount Bike Rack on a 2004 Cadillac Seville
Will it carry a 50lb Mens Bommie Beach cruiser on a 2004 Cadillac Seville? I am just carrying one bicycle. | I do have a solution for you to carry your 50 pound Mens Bommie Beach Cruiser bike on your 2004 Cadillac Seville. But none of the trunk...
Can Equa Flex Equalizer Replace Shorter Equalizer and Lift Trailer
I have a 2018 Forest River Sandpiper HT 3250IK and need to raise the trailer height. Will this give me any increase in ride height? My stock equalizers are 2inch frame hole to spring hole, the measurement on your LC279688 is 4... | Going to...
Electric Brakes On Trailer Working Intermediately With 2006 Mitsubishi Raider
I have an issue with my trailer brakes working only when they want to. Ive tested the controller as stated, checked red and black for power, severed the blue wire, its working properly. As I drive trailer brakes will start to work sometimes...
Shorter Replacement Rear Jacks For Lippert Ground Control 3.0 4-Point Leveling Increased Clearance
i have a 2018 forest river sandpiper 3250 ik ht. This rv has a ground control 3.0 auto leveling by L C I. My issue is there is no adjustment left in the mounting bracket to raise this up off the ground more ,it is at 5 inches off the ground...
Recommended Transmission Cooler For 2006 Mitsubishi Raider
Installation of external transmission cooler on a 2006 mitsubishi raider with factory tow. What extra fittings might I need for install and what kit would be best | For your 2006 Mitsubishi Raider, the Derale Series 9000 Plate-Fin Transmission...
Adapter Needed to Clear Bumper of 1995 Cadillac Seville SLS
Hello, I have a 1995 Cadillac Seville sls. I have found the receiver hitch I need, but I will also need a 1.25 in to 2 in receiver adapter that also will raise/clear the 2 in adapter orifice around the rear bumper. In other words, the adapter...
Will the Bedliner Need to Be Removed for PAL3600 Installation for 2006 Mitsubishi Raider
I have a bedliner installed in my 20006 Mitsubishi Raider, and it covers then inside of the tailgate. Will I have to remove the bedliner to install the tailgate lock? | You will need to be able to access the three bolts on the inside of the...
Wiring a 4-Way connector on a 2006 Mitsubishi Raider
I dont know collor code to my truck Mitsubishi Raider 2006 | The taillight wiring colors for your truck could be any color, manufacturers change wiring colors for many different reasons and often within the same model year. To determine the...
Can 2008 Mitsubishi Raider 2WD be Flat Towed with Driveshaft Disconnect
I have a 2008 Raider 2WD with a drive shaft disconnect. I currently tow it on a dolly. I would prefer to tow it 4 down but cant find base plates. Any suggestions? Thanks | If you have a rear driveshaft disconnect on your 2008 Mitsubishi...
Parts Needed to Install a Trailer Brake Controller on a 2006 Mitsubishi Raider
How to in stall a Prodigy P2 brake controller on a 2006 Mitsubishi Raider with Factory Tow Kit..Cant find a quick connect. Can I use one made for Dodge Dakota? I do have a v8 if that makes a differance.. | I spoke with my contact at Tekonsha...
Filter Your Search
Contact and Help