2 Ball Adjustable Ball Mount Recommendation that Can Do Up to 9 inches of Drop
I am looking for an 8inch fixed aluminum ball mount for my truck. I have two trailers I routinely tow, one needs a 7inch , and the other needs a 9inch . I have read a couple reviews where the adjustable 10inch actually only give you 8inch...
Tool Box Recommendation for a 2006 Mitsubishi Raider That Fits Below the Rails
I need a tool box for the bed if my truck but I want it to fit comfortably inside I dont want it showing | I have found several toolboxes that will fit your 2006 Mitsubishi Raider, however, the DeeZee Toolbox # DZ8748HDS is not one of them that...
Trailer Hitch for 2002 Cadillac Eldorado for Towing Motorcycle Trailer
Will this be suggested for a light duty trailer such as one to tow a 700 pound Motorcycal | The Curt hitch part # C12068 that you referenced has a trailer towing capacity of 3,500 lbs so it would easily handle a small trailer that has a 700...
Can Weather Tech Bug Shield Survive Going Through Car Wash
Will I be able to go through the car wash after its in place. | Yes, the Weather Tech Easy-On Stone and Bug Shield Deflector # WT50150 that you referenced is sturdy enough and mounts sturdy enough to survive going through a carwash. |
Install Instructions for GloLight LED Trailer Tail Light
Hello! Can you provide install instructions? | To install the GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 32 Diodes - Round - Red Lens # STL190RB you just need to match the wires by color or function. On the light: white...
Trailer Wiring Harness Recommendation for a 2007 Mitsubishi Raider
I need to add a 7 wire harness to my 2007 Mitsubishi Raider pick up so I can pull a small camper. The truck does not have a factory wireing harness for towing. Which harness would be the best for me to use. | For a 4-way wiring harness recommendation...
Does Trailer Wiring for 2007 Mitsubishi Raider Sense Varying Voltage for Brake Light Activation
I have a few questions about the 118323 combined lights and brakes 4 way connector harness for my 2007 Mitsubishi Raider. 1. Is the brake lights intensity changed based on the amount of power going to the brakes? 2. Description indicates that...
Parts Needed to Add Wiring Harness to 1971 Cadiallac Eldorado
Would like to add a light trailer to my 1971 8.2L 360HP Cadillac Eldorado. Do you have something Original or that can be adjusted to fit my vehicle? | It sounds like you might be trying to add a wiring harness to tow a trailer with your 1971...
Electric Brakes On Trailer Working Intermediately With 2006 Mitsubishi Raider
I have an issue with my trailer brakes working only when they want to. Ive tested the controller as stated, checked red and black for power, severed the blue wire, its working properly. As I drive trailer brakes will start to work sometimes...
Recommended Transmission Cooler For 2006 Mitsubishi Raider
Installation of external transmission cooler on a 2006 mitsubishi raider with factory tow. What extra fittings might I need for install and what kit would be best | For your 2006 Mitsubishi Raider, the Derale Series 9000 Plate-Fin Transmission...
Will the Bedliner Need to Be Removed for PAL3600 Installation for 2006 Mitsubishi Raider
I have a bedliner installed in my 20006 Mitsubishi Raider, and it covers then inside of the tailgate. Will I have to remove the bedliner to install the tailgate lock? | You will need to be able to access the three bolts on the inside of the...
Wiring a 4-Way connector on a 2006 Mitsubishi Raider
I dont know collor code to my truck Mitsubishi Raider 2006 | The taillight wiring colors for your truck could be any color, manufacturers change wiring colors for many different reasons and often within the same model year. To determine the...
Can 2008 Mitsubishi Raider 2WD be Flat Towed with Driveshaft Disconnect
I have a 2008 Raider 2WD with a drive shaft disconnect. I currently tow it on a dolly. I would prefer to tow it 4 down but cant find base plates. Any suggestions? Thanks | If you have a rear driveshaft disconnect on your 2008 Mitsubishi...
Which No-Drill Mounting Bracket For Curt Trailer Hitch Receiver C12068 On 1996 Cadillac Eldorado
Do you know with certainty which Tow Readyinch Mount Bracket Long 18136 or Short 18140 would be the proper size/length for my Eldorado application? | Since the Curt trailer Hitch Receiver # C12068 has the crosstube hidden behind the rear bumper,...
Parts Needed to Install a Trailer Brake Controller on a 2006 Mitsubishi Raider
How to in stall a Prodigy P2 brake controller on a 2006 Mitsubishi Raider with Factory Tow Kit..Cant find a quick connect. Can I use one made for Dodge Dakota? I do have a v8 if that makes a differance.. | I spoke with my contact at Tekonsha...
Modifications to Bumper Cover to Install Curt Class II Trailer Hitch on 2000 Cadillac Eldorado
Would i have to cut hole in rear bumper cover for this hitch? | Installing the Curt Class II Receiver, part # C12068 on your 2000 Cadillac Eldorado would require no cutting, trimming or other modification in the rear bumper cover. According...
Longest Available 1-1/4-Inch Class II to 2-Inch Class III Hitch Extension Adapter
Hello, I hjust bought a 2000 Cadillac Eldorado, and need a 1-1/4 to 2 adapter. I have old ones, but they are too short. I carry a bike rack with the adapter and a cargo carrier - nothing too heavy. The adapters I have are 6 hole to hole,...
Filter Your Search
Contact and Help