Roof Vent Cover Recommendation for MaxxAir Roof Vent with Rain Sensor
can I install a vent cover over my maxx air rain sensing roof vent | Yes, the MaxxAir FanMate Rain Cover part # MA00-955003 will work well with the MaxxAir Roof Vent system part # MA00-955003 that you referenced. |
Tool Box Recommendation for a 2006 Mitsubishi Raider That Fits Below the Rails
I need a tool box for the bed if my truck but I want it to fit comfortably inside I dont want it showing | I have found several toolboxes that will fit your 2006 Mitsubishi Raider, however, the DeeZee Toolbox # DZ8748HDS is not one of them that...
Is There A Heating Element Available For An Advent Air AC Unit And How Hard Is The Installation
Does the Advent Air Replacement RV Air Conditioner Item # ACCAR150 have a heating element available? Is the installation replacement of Carrier unit easy not requiring an AC technician? I am very handy when it comes to jobs but I have never...
How to Determine What Bearing Buddies Fit on Trailer
I have this RV and the dealer is telling me they need to repack the bearings $300+. I’ve done this and it’s a mess. I know the Bearing Buddy can make it way easier. Wondering if these would work on my trailer? It’s a dual axle. I think they...
Can Lippert Solid Stance Be Installed to Rear Edge of RV Step
Does this have to be installed at the front edge of the step? It seems it would be more comfortable with the install bolts at the back edge of the step when going up or down the steps, especially with bare feet or flip flops. | According to...
Correct Replacement MORryde Shear Spring For Tandem Axle Trailer with 7.2K Axles
I have a 2009 Carriage Carri-Lite 40 year Anniversary 36SBQ. It currently has Dexter 7200k tandem underslung double eye leaf springs with the Sheer Spring attachment. Best I can measure the axles are 33-35inch wheelbase and the springs are...
Can Weather Tech Bug Shield Survive Going Through Car Wash
Will I be able to go through the car wash after its in place. | Yes, the Weather Tech Easy-On Stone and Bug Shield Deflector # WT50150 that you referenced is sturdy enough and mounts sturdy enough to survive going through a carwash. |
Looking For A 3 Shade 16" Long Vanity Light For A 2007 Carriage Cameo 5th Wheel
We have a 2007 Carriage Cameo 5th wheel. We need a 16 length, three shade vanity light for bathroom. Ours is antique brass with three shades with swirls in glass but need to replace. The one you have is to long. Item 277-000322 Gustafson. Do...
Install Instructions for GloLight LED Trailer Tail Light
Hello! Can you provide install instructions? | To install the GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 32 Diodes - Round - Red Lens # STL190RB you just need to match the wires by color or function. On the light: white...
Trailer Wiring Harness Recommendation for a 2007 Mitsubishi Raider
I need to add a 7 wire harness to my 2007 Mitsubishi Raider pick up so I can pull a small camper. The truck does not have a factory wireing harness for towing. Which harness would be the best for me to use. | For a 4-way wiring harness recommendation...
Does Trailer Wiring for 2007 Mitsubishi Raider Sense Varying Voltage for Brake Light Activation
I have a few questions about the 118323 combined lights and brakes 4 way connector harness for my 2007 Mitsubishi Raider. 1. Is the brake lights intensity changed based on the amount of power going to the brakes? 2. Description indicates that...
Does Bump Stop Have to be Used When Installing Dexter Over Under Suspension Kit
My 5th wheel has a Morryde LRE rubberized suspension and I am in the process of installing a Dexter over/under kit to gain more clearance. In the installation instructions it recommends using a bump stop also. I contacted both Morryde and Dexter...
Replacement Brake Assemblies for a Dexter Axle Part # 60826
My 2010 Cameo fifth wheel ha Dexter Axles # 60826. What brake assembly do you have that will fit my axles? I would like to replace the whole assembly. Also, do you have a video showing this replacement process? Thanks, | It looks like the...
Electric Brakes On Trailer Working Intermediately With 2006 Mitsubishi Raider
I have an issue with my trailer brakes working only when they want to. Ive tested the controller as stated, checked red and black for power, severed the blue wire, its working properly. As I drive trailer brakes will start to work sometimes...
Is Comfort Ride Leaf Spring Suspension Kit w/ Shocks a Good Fit for 2009 Carriage Carri-Lite 36SBQ
I have a 2009 Carriage Carri-Lite 40 yr anniversary 36 SBQ 36 ft 5th wheel with 17.5 inch wheels. I am upgrading to Dexter 8k axles. Currently the leaf springs are mounted under the axle. I am wondering if the Road Armor equalizer, shock kit...
Replacement Vent Cover For A 2010 Cameo Carriage 5th Wheel Trailer
Im trying to find a replacement vent cover for my 2010 Cameo carriage 5th Wheeler rv. Do you have to put the same cover back on? Im having a lot of trouble finding the same cover that is on it. Im going to try to send you a picture of what Im...
Recommended Transmission Cooler For 2006 Mitsubishi Raider
Installation of external transmission cooler on a 2006 mitsubishi raider with factory tow. What extra fittings might I need for install and what kit would be best | For your 2006 Mitsubishi Raider, the Derale Series 9000 Plate-Fin Transmission...
Replacement For Low-Profile Carrier 15,000 Btu RV Air Conditioner
Hello ! I have an 09 carriage domani df310 with a carrier v unit , it’s the low profile 15k btu . What unit would work for a replacement that’ll match up ? My compressor went out , these should bolt right up to my inside unit , charged and ready...
How to Determine if Furrion 2-in-1 Range Oven Can Replace Magic Chef Stove
Replacement for Magic Chief Maytag stove CLY2260BDB 2010 carriage Cameo 37’ 5th wheel | There may be a replacement for your Magic Chef Maytag, but it depends on the size of the cut out your CLY2260BDB uses. Most RV stoves have a similar cut...
Will the Bedliner Need to Be Removed for PAL3600 Installation for 2006 Mitsubishi Raider
I have a bedliner installed in my 20006 Mitsubishi Raider, and it covers then inside of the tailgate. Will I have to remove the bedliner to install the tailgate lock? | You will need to be able to access the three bolts on the inside of the...
Wiring a 4-Way connector on a 2006 Mitsubishi Raider
I dont know collor code to my truck Mitsubishi Raider 2006 | The taillight wiring colors for your truck could be any color, manufacturers change wiring colors for many different reasons and often within the same model year. To determine the...
Can 2008 Mitsubishi Raider 2WD be Flat Towed with Driveshaft Disconnect
I have a 2008 Raider 2WD with a drive shaft disconnect. I currently tow it on a dolly. I would prefer to tow it 4 down but cant find base plates. Any suggestions? Thanks | If you have a rear driveshaft disconnect on your 2008 Mitsubishi...
Parts Needed to Install a Trailer Brake Controller on a 2006 Mitsubishi Raider
How to in stall a Prodigy P2 brake controller on a 2006 Mitsubishi Raider with Factory Tow Kit..Cant find a quick connect. Can I use one made for Dodge Dakota? I do have a v8 if that makes a differance.. | I spoke with my contact at Tekonsha...
Can Over Under Kit be Used with MORryde SRE Kit
Can I use the dexter over under kit be used with morryde sle system. | Yes, an Over Under kit like the part # K71-385-00 which fits 3 inch axles can be used with a MORryde SRE system without any issues. |
Filter Your Search
Contact and Help