Torque for Installing Hardware of Trailer Brake Assemblies
How much do I torque the four bolts to replacement/install for my etrailer electric brake unit for my 3500lb tandem axle RV trailer? | 30 to 50 ft lbs of torque would be what you'd need when installing the brake assemblies part # AKEBRK-35-SA...
Kwikee Steps On Itasca Navion IQ Will Not Stop Once Retracted
2009 Itasca Navion IQ Two problems noted on my last RV trip. First symptom, steps didnt always auto retract. Second, step motor continues to run when the steps are fully retracted after closing the door. I assume its the controller. On...
What E-Bike Carrier Do You Recommend For 2013 Itasca Navion iQ Motorhome And A Toyota 4Runner
Mark S answered my previous question but a follow- up, please. I think the Yakima will be too heavy for me to move between my vehicles. Is there a lighter weight carrier available? Maybe Saris Superclamp HD which I think is out of stock everywhere??...
How Can I Determine Which Wheel Stud Will Fit On My 2015 Forest River Grey Wolf TT?
Will this stud work on my 2015 forest river grey wolf toy hauler? | If the wheel stud you're replacing measures 1/2" x 2-1/2", then the Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 2-1/2" # RG03-080 will work just fine for your 2015...
Is The Curt Rebellion XD Compatible With An Equal-i-zer Weight Distribution Hitch
I am looking at the EQ37120ET. I tow with a 2021 Chevy Silverado 2500HD 4WD Duramax. My trailer is a 2013 Forest River Grey Wolf toy hauler 21RR. I usually load my 2014 Harley Street glide 1200+_ lbs in the trailer. My last trip I noticed more...
Bike Rack for E-Bikes With Fenders & Step-Through Frame on Motorhome
I am trying to make the right decision regarding a back rack for our 2 Blix Vika folding bikes. Our RV has a rear slide out so I would like a rack that tilts. The videos I see for Swagman or KUAT racks show the locking system attaching to...
Replacement Fresh Air Intake Vent For A 2006 Forest River Grey Wolf TT Toy Hauler
Need a replacement for a fresh air intake vent on the rear side. The part number is PBD 877-646-9233. I havent been able to find anything. Help! | The only thing I consistently pulled up with part number PBD 877-646-9233 was plastic pop-up...
Recommended Single Camera Observation System for Inside of a Trailer
for Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5 Screen it can look at 4 cameras at once. is there a camera that is not motion actived so i can put inside my camper so i can see what is going on inside...
Trailer Tire Recommendation for 2017 Forest River Toy Hauler
What is the best tire for forest river 2017 toy hauler | I tried to look up what tire size your trailer would have came with but wasn't able to find that listed. One site said 14 inch diameter wheel but I am not totally sure. If you could get...
Converter For Motorhome With Separate Turn/Brake Signals to Combined Towed Vehicle Signals
I have a 2008 Navion IQ on a 2007 Sprinter Chassis with the Winnebago installed 6 pin round trailer adapter, which has separate circuits for turn signals and brakes. I want to convert this for a tow vehicle with 4 pins. Do you have a solution...
Will 205/75-14 Tire Fit a 15 Inch Wheel
Will this wheel fit a 205/75R14 tire? | The # AM34FR is a 15-inch wheel, so a 14-inch tire like a 205/75R14 wouldn't work, but if you like that style of wheel, we have options for you. You'll need to use a 205/75-15 tire like the Taskmaster...
E-Bike Carrier For 2013 Itasca Navion iQ Motorhome And A Toyota 4Runner
Can the Door County model be used with a small motorhome as well as an SUV? I will be moving the carrier between two vehicles, a 4Runner and a 25.5’ Itasca Navion. I love that it is on wheels - how high must it be lifted to install on a different...
Replacement RV Key for Code CF332
Looking for replacement key for 2013 Forest River Toy Hauler You show HF332 replacement however, number on my key is CF332 Will it work? | The replacement key part # GL26FR is the correct key as it fits the key codes FIC HF, EF, and CF codes. |
RV Shower Valve For Forest River Toy Hauler
Would this fit as a replacement in our 2017 forest river grey wolf toy hauler ? We are trying to eliminate the tub faucet part and only have the water come out of the shower head as right now it leaks water out of both the tub faucet and the...
Will the Gustafson RV Puck Light - 4-1/2" # 277-000344 Fit My 2013 Itasca Navion IQ
Need 41/4 wide base overall 41/2 metal with 3 screw holes it is 11/4 depth. Can you help? | I spoke to my contact at LaSalle Bristol and he confirmed the Gustafson RV Puck Light - 4-1/2" - Recessed - 4 Watt # 277-000344 will be a replacement...
Trouble Shooting Trailer Wiring On A 2013 Ford F-150
I have a 2013 Ford F-150 and when hooked up to my travel trailer, the tail lights and running lights work but the Brake and Turn signal lights do not work. I hooked up a different truck to the trailer and the Brake and Turn Signal lights work...
Replacement Grease Seal for Lippert 4,400 Pound Trailer Axle
Which seal do I need for 4400#. lippert axles? Thanks | The most common grease seal for a 4,400 lb axle is the # 58846 with a 1.719" inner diameter and 2.565" outer diameter. This is the same grease seal used for most 3,500 lb axles as well....
Replacement Leaf Springs on my 2016 Forest River 27RR
Any idea what the proper replacement springs for a 2016 forest river 27rr are? These were overloaded and are flattened, and eye to eye measures ~26.5 right now. My guess is they are supposed to be 25 1/4. Honestly, I carry pretty close to capacity,...
Which Grease Is Trailer Hub And Drum Assembly AKHD-545-35-K Pre-Greased With?
What type of grease is used in the pre-lubed bearings? | The Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased # AKHD-545-35-K you were looking at are pre-greased with a Lithium complex, multipurpose grease....
Are 4-Leaf Double-Eye Springs SP210275 Compatible With Bronze Bushings?
The springs on my trailer came with plastic bushings which are now worn out. The spring eyes are nominally 11/16 but the bronze bushings wont fit because the spring eyes are not well machined. I guess with the plastic bushings they didnt need...
Filter Your Search
Contact and Help