Installation Recommendation for a TruXedo Tonneau Cover on a 1995 Chevrolet S-10 with Bed Liner
I have a bed liner, something tells me I have to remove it, or make adjustments, to the liner, meanining, make holes where the clamps will be placed. I am willing to do that. I want this cover. I have researched all, or most of the tonneau covers,...
Why Does my 2 Inch Hitch have a 1/2 in Pin Hole and a 5/8 in Pin hole
I have a 2inch x 2inch hidden hitch. It has the hitch pin holes for a 1/2inch and a 5/8inch pin. I need a 1/2inch pin and can not tell if this will work with a 2inch x 2inch hitch. Most 1/2inch pins specify that they are for 1 1/4inch hitches,...
Quick Link Recommendations for a Roadmaster Base Plate Kit Short Safety Cables
It seems that I need 4 of those Chain links things that tighten and you only supply 2. I have looked at several videos and they show a chain link one each end of each of the short safety cables. Did I not receive them or do you only provide...
Recommended Ladder Rack And Kayak Carrier For 2001 Chevrolet S-10 With Bed Cap
I would like to transport 2-12foot kayaks on the top of a 2001 Chevy S10 with cap. Currently no roof racks on either truck or cap. At times, truck will be towed behind an RV. What system/s would you recommend. | For your 2001 Chevrolet S-10...
Recommended Wiring For 7-Way Trailer Connector And Brake Controller For 2003 Chevy S-10
I got good answers from Jameson C regarding 2003 S-10 that I recenlty purchased, but guess I need to see what else is already in the truck. Definitely was no controller left with it, but havent checked under dash to see if one had been there....
Help Picking Out Trailer Hitch for 1997 Chevy S-10 with Sportside and Roll Pan Bumper
I have a 97 chevy s10. I call it a stepside but is it also called a sportside? It has a roll pan rear bumper and Im looking for the right trailer hitch to put on it. Not sure which one is the right one. | Sounds like you have the Sportside with...
Suspension Enhancement for a 2003 Chevy S-10 4x4 ZR2
do these fit my 2003 chevy s10 4x4 zr2? | The Air Lift Vehicle Suspension, # AL59531, is designed to fit the 2003 Chevy S-10 4x4 as long as it does not have a track bar. A track bar is a part of vehicle suspension on some vehicles that is designed...
Which MagnaFlow Exhaust Cutout Will Fit a 1996 Chevrolet S-10
Would a MagnaFlow Exhaust Cutout #MF10784 Fit a Chevy S10 Pickup? | According to my research, if you have the 2.2L I4 engine on your 1996 Chevrolet S-10 then you have 2-1/4" diameter exhaust pipe which means you would need to use the MagnaFlow...
Availability of Air Bag Suspension for 2003 Chevy S-10 with Factory Lowered ZQ8 Suspension
Air bags to fit an S-10 with the factory ZQ8 suspension option? thanks the photo is the actual truck Id like to add these to. | According to my AirLift representative, their Ride Control system, part # AL59535 is compatible with the ZQ8 suspension...
How to Wire a 7-Way Trailer Connector on a 1999 Chevrolet S-10 Pickup
I have a new boat and the trailer plug is a round plug like the 7 way, but it is only a 5 wire. The 5th wire is for backup lights so that the surge brakes on the trailer will release when backing up. But my other boat and utility trailers...
How to Choose the Correct Ball Mount for 2003 Chevy Pulling Fish Shack
2003 Chevy 1/2 ton. I am pulling a home made fish shack 8 foot long 10 foot wide with no suspension.wondering if i need a 2 inch drop or 4 inch drop. | In order to choose the correct ball mount, there are a couple measurements you'll need to...
Blue Ox Base Plate Kit - Fixed Arms for 2001 Chevrolet S-10 Pickup
does this fit the above 2x2 LS 2.2L engine? | The # BX1633 is for bigger trucks like a 1500 but the Blue Ox Base Plate Kit - Fixed Arms Item # BX1625 is the confirmed fit from the manufacturer for your vehicle. |
Replacement Tarp For Extang Tuff Tonneau Cover on 2000 Chevy S10
What is the correct part number for a snapless replacement cover for Extang Tuff Tonneau on a 2000 Chevy S10 with 6 foot bed? | The Extang Tuff you have on your S10 is the 14605. The correct tarp is the Replacement Tarp for Extang Tuff Tonno...
Brake Controller and Wiring Recommendation for 2003 Chevy S-10 with 7-Way
Ive recently purchased a 2003 Chevy s-10 pickup and I intend to occasionally pull a 16 foot trailer with one axle braking. It has a Hopkins 4/7 connector like you show for Code 30955. Assuming it is installed correctly, what brake controller...
Does the Westin Fey Bumper # 66001-97200 Come with a Hole to Access the Spare Tire?
Please verify that this bumper has a hole left of the license plate area to access the spare tire hanger for lowering. Thank you | I have an answer for you. Unfortunately, our installation team here at etrailer confirmed that the Westin Fey...
Is there a Bull Bar that Fits a 2000 Chevy S-10
Im looking for a bullbar for a 2000 Chevu S10 4.3 Engine . . 2 Wheel Dr . . Which would it be? | For your 2000 Chevy S-10 we have a couple of light bars that look similar to Bull Bars but their primary function is to hold additional lights....
Reese Fifth Wheel Rail to Gooseneck Hitch Adapter # RP58079 Recommendation for a 1996 C2500 Chevy
I have a Reese 30027 5th wheel hitch installed on my 1996 C2500 Chevrolet truck. I want to be able to pull a gooseneck trailer at times. Will the Reese RP58079 hitch be a good solution? Will the Reese RP58079 mount directly to the rails from...
Hitch Fit for 1987 Chevy S-10 With Factory Step Bumper
On a 1987 Chevy S-10 Pickup with a long bed and a factory step bumper, is the Curt #c13132 a direct fit onto the frame with no holes to drill? Are there any spare tire operation or location issues? | Curt hitch # C13132 is a confirmed fit...
What is the Length of Wire that Comes from the LED Step/Area Light
A photo shows light with a probable plastic or rubber harness cover covering the black and white wires until the wires are exposed How long is the black harness and wires You may want to update web page Thanks | I pulled a LED Step/Area Light...
Trailer Hitch Recommendation for 2001 Chevy S-10 with Factory Step Bumper
Heya, Looking at the bottom of my step bumper I dont see how this will attach properly. The step bumper appears to be hollow on the bottom, rather than a flat stock and has tabs extending down at angles with holes in them, presumably for bolting...
Availability of Trailer Hitch for 1998 Chevrolet S-10 pick with the Extreme Kit
Ihave a 1998 chevy s10 but it dosent have the back bumper any moore it has xtrem kit all the way around,need hidden hitch the can come out true the licence plate not under the bumper,do you have one like that,and what is the part number please.thankyou...
How to Wire Third Brake Light on Camper Shell
Looking to wire my camper shell third brake light tou 1989 S10 pick up ext cab. Do you carry a logic module for this type of hook up. Thanks | Yes we do have a logic module that will work to wire your third brake light on your camper shell,...
Will the Yakima Outdoorsman 300 Ladder Rack Fit a 2002 Chevy S-10
I have a 2002 Chevy S10 LS Truck,, with a 6 foot box. Although my truck is a light duty, I was not sure if the reference for a compact truck means that the box is of the short variety 4.5 feet or a reference to the truck just being smaller....
Hitch Availability for 2004 Chevrolet S-10 Pickup
How much for a hitch for s10 2004 | We do offer both Class II and Class III trailer hitches for the various versions of the 2004 Chevrolet S-10 Pickup and all can be seen on the link provided. The correct one for your particular truck can be...
Filter Your Search
Contact and Help