Replacement Weight Distribution System for Use with Reese Shank
What is a replacement for the Reese SC 800lb Spring bar 58357? | The Reese SC weight distribution system has been discontinued and the spring bar part # 58357 is no longer available. The nature of the specific head assembly you have does not...
Longest Weight Distribution Shank for a Husky Center Line Weight Distribution System
I have a 2017 F250 and need a longer shank to gain greater separation btw truck and trailer to be able to open tailgate when hitched up and more than my current shank to get trailer leveled. Is this shank compatible the hole measurements and...
Most Amount of Drop That Can Be Had with Equal-i-zer Weight Distribution System for 2-1/2 Inch Hitch
I wanting to purchase a equalizer 4 hitch but need a shandy for a 2.5inch reciever with 9inch of drop. Equalizer does not offer this. Is there another shank i can purchase that will work with the equalizer? | The most amount of drop we offer...
Does Weight Distribution Cause Tire Wear On A Tire's Inside Only
I have a 2018 Coachman Clipper 125ST Sport. This is a single axle trailer. The original ST18580R13 tires were low miles and started wearing on the inside. Never overloaded, no bent axles, tire pressure at 65psi per manufacturer. There are...
Can Blue Ox Weight Distribution System be Used in 2-1/2 inch Hitch with or without Adapter
Im looking at some different WD hitches and wonder if the reducer will down rate the hitch? Ill be using it on a 2014 Ford F-350 SRW and pulling different trailers. | The 2-1/2 inch to 2 inch hitch reducers do not cut the capacity of the hitch...
Brake Controller and Weight Distribution for 2015 Jeep Wrangler Unlimited and 3.5K Trailer
Hello, Just bought a trailer that is 3500 lbs dry. The tongue weight is 350 lbs. I have the factory tow package on my 2015 Jeep Wrangler Unlimited with a 4 pin hitch adapter. I need a 7 pin. Also need a brake controller and weight distributing...
Replacing 6-Leaf Springs on 12K Axles with 7-Leaf
I was wondering I can replace the 6 leaf spring on my 12k dexter axle trailer with a 7 leafs spring part # SP-270275? Both are 3 inch leaf spring. Also is it necessary to replace the U-bolt, if so what is part number for them? As per the measurement...
Parts Needed To Tow 3,000 Lb Trailer With 2015 Ford Explorer
My owners manual states that the Explorer FWD with 3.5L TiVCT engine has a 2,000 lb towing capacity without a towing package. With a towing package consisting of an engine oil cooler and weight-carryinginch hitch and ball, it will raise the...
Leaf Spring Lengths Available for Use with Dexter Trailer Axle Rated for 3500-lbs
looking at 7359765eb axle wondering if comes complete with springs? | The axles like # 7359765-EB that we offer do not come with leaf springs but we do offer leaf springs rated for this axle's 3500-lb capacity. On the linked page you can see...
Fastway Weight Distribution System Recommendation for Trailer with GVWR of 6,200 lb
We are pulling a 27foot travel trailer that weighs 4700 dry/empty with a GVWR of 6200 with a 2015 F-150 Ecoboost. We dont know the exact tongue weight. Should we get the 6000 or 8000 hitch? | Based on the trailer weight you have the best Fastway...
Adjusting Small Trailer Pitch Difference with Equal-i-zer Weight Distribution System Installed
I have a 2018 Chev Silverado doublecab with Max tow Package towing a 2018 Coachmen Apex 267RKS with tongue weight 940 lbs tongue wt. 14.8, trailer loaded 6360 lbs. Trailer parallel to the ground hitch ball height 21 1/8 Trailer pitch level:...
What is the Maximum Tongue Weight Capacity of a 2017 Toyota Sienna Using Weight Distribution
I have a 2017 sienna, a curt receiver hitch which is rated for 500 lbs when using a wd. my wet tongue is 450lbs, if i put a 100lb equalizer wd on my trailer will that exceed the limits of the receiver hitch? | The weight of a weight distribution...
Recommended Suspension Enhancement and Weight Distribution for 2018 Dodge Grand Caravan
I have a 2018 Dodge grand caravan and am towing a camper trailer. I have some sag and was wondering what suspension upgrade I should use. Also I would like a weight distribution system to stop any sway. What do I need? | Adding a rear suspension...
2-1/2 inch Shank Recommendation for Curt 17500 Weight Distribution System
I have a three year old Curt 17500 system for towing my trailer. I have replaced my pickup and need a new shank for my new for my system with a 2.5inch x2.5inch shank. Current shank is 4inch /8inch rise but shank was 2inch for my old F-150...
Can Socket ALL643216 Be Used with Equal-i-zer Weight Distribution System EQ37140ET
Will the all643216 work with the equalizer 90-00-1400. I see it works with another brand that was asked here. | Yes, you can use the thin-walled socket # ALL643216 for hitch ball installation on the Equal-i-zer Weight Distribution System # EQ37140ET....
Best Fastway Weight Distribution System for a Total Tongue Weight of 900+ Lbs
I drive a 2000 Dodge Ram 1500 and I have a 2010 Forest River V-Cross ST Super Lite 29VBH camper. The GVWR for this camper is 7,900 lbs, but the hitch weight is 907 lbs. Would I be able to use part# FA94-00-1000 to pull this? Thank you, | In...
Recommended Weight Distribution System For Towing 2018 Rpod Trailer
We just purchased a 2018 RPod 180 and will be pulling it with a 2016 Toyota Tacoma 4x4 Sport with a V6 engine. This is our first trailer. We are wondering if sway control is necessary. Also do we need weight distribution? If the answer is yes...
How to Setup the Equal-i-zer Weight Distribution System on a 2017 Ford Expedition
I have a 2017 Ford Expedition, and pull a 6700 lb trailer about 800 lbs tongue weight. I have the max tow package, and the Exp pulls great. I also use an Equalizer hitch, but have had trouble getting the Equalizer to correct for the squat...
Does Equal-i-zer Weight Distribution System EQ37041ET Come With a Shank?
does this come with a shank? | The Equal-i-zer Weight Distribution # EQ37041ET does not come with a shank. This system has a tongue weight capacity of up to 400 lbs and there are three shanks compatible with that weight capacity, each of which...
Is a Thin Walled Socket Required when Installing Hitch Ball in Equal-i-zer WD # EQ37041ET
It says that the thin walled socket is recommended...do I have to use it? | Although a thin walled socket, like part # EQ70-00-4800, is not required to install the hitch ball on the Equal-i-zer Weight Distribution # EQ37041ET, it will make the...
Where is Equal-i-zer Weight Distribution System Manufactured
Where is this made? | The Equal-i-zer Weight Distribution System # EQ37041ET referenced in your question is made right here in the USA. This is an excellent system that will do a great job of evenly distributing weight over the axles of your...
Recommendation For Weight Distribution For R-Pod 171
Will this reduce the swaying of my Rpod 171? | When selecting a weight distribution system for your R-Pod 171, the key factor is the tongue weight (TW) of your towing setup. This means the total load of your trailer with all the gear and supplies...
Equal-i-Zer Weight Distribution System Recommendation for 8,000 lb Trailer
So I suppose if I have a 8000 gvw and a 650lb tongue weight, none of the equalizer wds are for me. Would you recommend the E2 8000 then? | I have a better solution for you, but with your relatively lighter tongue weight on your trailer you are...
What Does Tilting the Head Forward and Backward Do On a Weight Distribution System
What are the effects that will happen when the tilt angle on my adjusteable ball hitch goes forward and backwards | It sounds like you may be asking about the tilt mechanism on a weight distribution system. If that is not the case then please...
Filter Your Search
Contact and Help