Recommended Wiring and Brake Controller for Towing With 2003 Chevy S-10 ZR2
I have a 2003 Chevy S-10 ZR2. We have a 15 RiversideRV Retro camper single axle. Im a complete beginner on towing, but not untechnical. There is a 7-pin blade coming from trailer. I noticed a couple of 4-wire connectors at the back of the truck....
Parts Needed to Flat Tow a 2000 Chevy S-10 Behind an RV
Will the curt is tow bar work on a 2000 s10 | Curt Tow Bar # C19745 isn't vehicle specific so you can use it on your 2000 Chevy S-10. It comes with universal bumper brackets that will need to mount to a flat, metal section of the vehicle bumper...
Recommended 50 Amp Circuit Breaker for Larin Hitch Lift
Truck S-10 model 2000, single cabin the installation manual request customer to provide for: 1. 50 amp circuit breaker and two 2 6 AWG battery terminals with 5/16 opening. Is this the correct breaker for application? Any recommendation is...
Trailer Hitch Recommendation for a 2003 Chevy S-10 with Factory Step Bumper
Hi, I am shopping for a hitch for my 2003 Chevy S-10 standard bed. I will be towing a kayak trailer with up to 4 kayaks. What do you recommend? Thanks, | The most popular hitch we offer for your 2003 Chevy S-10 that would work great is the...
Flat Towing a 2002 Chevy S-10 2WD Behind a Motor Home Recommendations
Can I tow my 2002 Chey S-10 automatic behind my motor home without an auxilary transmission pump? | I did some checking and it looks like the only way to flat tow your 2002 Chevy S10 is with a lube pump. Check the owners manual of your truck...
Suspension Enhancement for a 2003 Chevy S-10 4x4 ZR2
do these fit my 2003 chevy s10 4x4 zr2? | The Air Lift Vehicle Suspension, # AL59531, is designed to fit the 2003 Chevy S-10 4x4 as long as it does not have a track bar. A track bar is a part of vehicle suspension on some vehicles that is designed...
Help Picking Out Trailer Hitch for 1997 Chevy S-10 with Sportside and Roll Pan Bumper
I have a 97 chevy s10. I call it a stepside but is it also called a sportside? It has a roll pan rear bumper and Im looking for the right trailer hitch to put on it. Not sure which one is the right one. | Sounds like you have the Sportside with...
Will RoadActive Suspension Kit Raise 2001 Chevrolet S-10
Will this product raise the ride height any at all | The RoadActive Suspension Kit # RAS4527-T will typically raise the rear of your 2001 Chevy S-10 about 1/2 to 3/4 of an inch. If you would like to raise your truck the tension can be adjusted...
Quick Link Recommendations for a Roadmaster Base Plate Kit Short Safety Cables
It seems that I need 4 of those Chain links things that tighten and you only supply 2. I have looked at several videos and they show a chain link one each end of each of the short safety cables. Did I not receive them or do you only provide...
Do the Air Lift Ride Control Springs Require Drilling to Install on a 2001 Chevy S-10 4WD
Hi, does this kit just bolt on? I have a 2001 s-10 crew cab 4x4. Do I need to drill holes in the frame for this to work? Thanks | You will need to drill a few holes to install these Air Lift Ride Control Air Helper Springs # AL59535. Check out...
Installing 7-Way Connector and Trailer Brake Controller on 1996 Chevy S-10 Pickup
Hi, I read the information you posted here but wanted to email directly as you suggested since I am looking to access the brakes on the trailer. Here are the specs: Truck is a 1996 Chevy S10 pickup with 2WD LS. It has a pretty beat up looking...
Trailer Wiring Options for a 1998 Chevy S-10
My s10 is marked 12/97. So 98 modle.. Iv looked at both wiring modle harnesses.. These all have round connectors. Under my truck I have flat connectors on left and right side. Also 1 bigger female connector n the middle.. Bigger that average...
What Size Hitch Ball Will Fit my 2002 Chevrolet S-10 Bumper Ball Hole
I have a chevy s-10 2002 ext cab and I need to know which hitch ball will fit my bumper..I liked the way this one looks and thats its stainless steel..I am not sure if it will fit.. thanks.. | In order to make a proper selection for a hitch...
Recommended Trailer Hitch Receiver for 2002 Chevy S-10 Truck
I was watching the installation video of a Hidden Hitch 87525 for a 2002 Chevy S10 on Youtube. Is this model no longer available from etrailer.com? I dont see it listed. I have the same vehicle with the same rear bumper depicted in the installation...
Trailer Hitch Recommendation for 2001 Chevy S-10 with Factory Step Bumper
Heya, Looking at the bottom of my step bumper I dont see how this will attach properly. The step bumper appears to be hollow on the bottom, rather than a flat stock and has tabs extending down at angles with holes in them, presumably for bolting...
Locking Tailgate Lock Options for a 1996 Chevy S-10
Do you sell similar product for 1996 chevy s-10. If you do can you send me details and price? | We have a couple of different tailgate lock options for a 1996 Chevy S-10. First is the Pop and Lock Powered Lock, # PAL8150. This lock wires into...
Troubleshooting 4-Pole Trailer Wiring Installation on 1998 Plymouth Grand Voyager
The turn signals work on the trailer but the brake light and light does not. What could be the problem. Installed this kit on a Plymouth Grand Voyager. | The best way to test the lighting functions on your 4-pole harness # 118334 is to disconnect...
Troubleshooting Wiring Harness on 2003 Chevy S-10
I just purchased part #118359 wiring harness and trailer connecter for my 2003 Chevy S10. The lights come on and the turn signals work well. However, when I press the brake, all of the lights go out. Can you tell me how to fix the problem?...
I am looking for this part or similar 1403235-4 | I am sorry Juan but we do not have Lund tonneau covers or any replacement parts that will work with them. |
Brake Controller and Wiring Recommendation for 2003 Chevy S-10 with 7-Way
Ive recently purchased a 2003 Chevy s-10 pickup and I intend to occasionally pull a 16 foot trailer with one axle braking. It has a Hopkins 4/7 connector like you show for Code 30955. Assuming it is installed correctly, what brake controller...
Is the Roadmaster Tracker Tow Bar Compatibile with Standard Base Plate 161-2 for a 1998 Chevy S10
had a 1996 geo tracker with 118-1 base plates and the tracker tow bar, now have a 1998 chevy s10 i think i need the 161-2 base plates can i use the tracker bar from the geo | Yes, the Tracker Tow Bar, part # RM-020 that you use with your Geo...
Will Tow Ready T-One Wiring Harness Fit 2003 Chevrolet S-10 Xtreme
will this work on 2003 s10 xtreme? 2003 Chevrolet S-10 Pickup T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Code: 118359 | The Tow Ready T-One Wiring Harness, part # 118359 is designed to fit your S-10 Xtreme. You just...
Supplementary Braking System for Flat Towing a 1994 Chevrolet S-10 Pickup
required for flat towing? | The Roadmaster Even Brake Portable Proportional Braking System # RM-9400 that you referenced is among the easiest-to-use supplementary braking systems available for flat-towing. This is one of the components required...
Base Plates Recommendation For 1994 Chevrolet S-10 Pickup To Use With Falcon Tow Bar
Hello I have a 1994 S-10 4x4 and a falcon towing kit That my wife got for a Toyota pickup.but the mounts to the truck does not fit. Can you tell me what fits my S-10 thanks | Since you said you have a Falcon Towing Kit, I assume you mean you...
Filter Your Search
Contact and Help