Replacement Front Jack for Lippert Ground Control 3.0
Hello, I am looking at your part 179013 and 179014. I have 3.0 Grounding and they do not look the same and could you tell me if you carry a replacement part for my leg. My legs have motors mounted directly to the leg. Keystone Larado 2018...
Replacement For A Recessed Puck Light With A 03-HPG 46 LED Light Bulb
I have a 2016 Keystone Laredo and the pick lights above my couch and recliner have faded out. I measured the lens and it’s closer to 5” but the base opening is 3”. Mine also have only 6 led lights …can you suggest a proper replacement? | We...
What Replacement Snap Pads Will Work With My Lippert Ground Control 3.0 9 Inch Round Feet
We have the Lippert Ground Control 3.0 jacks on our 2021 Keystone Laredo 5th wheel. The jack feet on the back are 9 in. round but the front are 8 1/2 to 8 3/4 in. round. Will the 9 in. Snap Pad fit both front and back with the difference in...
Replacement Motor for Landing Gear of 2008 Keystone Laredo
Will this part fit my 2008 keystone Laredo fifth wheel | If your 2008 Keystone Laredo has a landing gear set that is the brand Venture, Lippert, Power Gear, or LCI this # LC142178 is most likely a fit but without knowing for sure what brand...
Replacement Wiring Harness for Lippert Ground Control 3.0 System
Need a couple of the 3 pin connectors that goes in to the board where all the jacks plug in | The connector you sent in a picture of appears to be the wiring harness from a Ground Control 3.0 system like part # LC307490. We don't have a way...
How To Use Curt Q5 5th Wheel Hitch Head On 2020 Ford F-250/F-350 with Pucks
i have a Curt 16125 and need the part # for the legs to fit 2020 ford F250/ F350 factory puck? And does the puck lock system come with the legs or with the truck? | It sounds like you are looking for the Curt OEM 5th-Wheel Hitch Legs for Ford...
Does the Replacement Dome Assembly # BVD0449-A01 Come with the Seal/Gasket
Im looking at a rV vent #bvd0449-a01 does it come with a gasket? Thanks | The Replacement Dome Assembly # BVD0449-A01 that you referenced does not come with a gasket - it is the replacement lid only. For the seal, or gasket, you will want...
How To Find the Correct Replacement Landing Gear Legs for a 2013 Keystone Laredo
I have a keystone larado 335tg 2013. We had a really bad storm last night resulting in my landing gear being bent really bad. I can’t seam to find any where what model to get to replace my gear. If I can I would like to be able to get a little...
Selecting The 3 Step or 4 Option of the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear
When measuring the factory steps on my 2013 Keystone Laredo 329 RE, I definitely need the 27inch wide assembly. My question is whether I need 3 steps or 4. The height of the mounting bracket is 33inch when level on a concrete pad. I believe...
Can JTs Strong Arm Stabilizer Bracket Mount on Inside if I-Beam
I have an IBeam frame. My gas line runs somewhat center towards outside of the frame. Can I mount the brackets on the inside lip of the I frame? | Hi Darin, Yes you can mount the brackets to the inside of your I-beam when installing the JT's...
Replacement Bearings, Races and Grease Seal For Dexter 4,400LB Axle Under 2021 Keystone Laredo
I have a 2021 Laredo 255srl fifth wheel with Dexter axle no: 248744 of 4400 lbs and I would like to know the part numbers of the internal and external bearings, race complete set beauring, race, seal Thank you Jai une fifth wheel Laredo 255srl...
Are The Econo Porch Trailer Step with Handrail and Landing # EHS-103-R Shipped Assembled?
I think these steps the Econo Porch Trailer Step with Handrail # EHS-103-would work for my 5th wheel as the height from ground to entry is about 30 inches. Does this come assembled? I have seen on other websites that these Econo porch with...
Replacement Side Marker Amber Light For a 2020 Forest River EVO Travel Trailer
looking for a Gladiator hubcap on a 2020 Forest River EVO travel trailer, and a front amber side marker lamp | While I cannot look up the exact parts used on your 2020 Forest River EVO travel trailer based on images I could find it does appear...
Recommended Self Adjusting Brakes for 2014 Keystone Laredo 5W Travel Trailer
Need to replace the dexter brakes I have on my fifth wheel TT. Below is the part # the right hand set. I’d like self adjusting thanks Dexter backing plate part #023-463-00 | Based on your Dexter brake assembly information, it looks like you've...
Crank Extension and Crank for Lippert RV Spare Tire Carrier with Winch
Does the crank extension stay connected to the winch? If so, what keeps it from moving and banging around? If not, how does the crank extension connect to the winch? Thanks, 2017 Keystone Laredo 342RD 5th wheel. | The Lippert Components RV...
Replacing OEM Landing Gear with Reese Electric 5th Wheel Landing Gear Set - 36
I have a 2011 Keystone Laredo 321bh. I want to replace existing but failing front electric landing gear jacks with the Reese 36” lift 8000 lb electric jack system. My 5th wheel dry weighs in at 13500 lbs. will these jacks as long as the distance...
What is Needed to Pack Bearings on Trailer
I have a 2021 Keystone Laredo 325RL 5th wheel. What do I need to repack the bearings? I have never done this on an RV so once I start i want everything I need on hand | In order to re-pack the bearings on your trailer, all you will need is the...
Is The Correct Track Kit Compatible With Lippert Road Armor Equalizer On a 2021 Keystone Laredo
The RR23QX kit does this on a 2021 Keystone Laredo 255srl fifth wheel with Road Armor suspension with wet bolt in order to align the axles. Thank you Le kit RR23QX fait il sur une fifth wheel Keystone Laredo 255srl 2021 avec une suspension...
Will Dexter Nev-R-Adjust Electric Brakes K23-478-479 Fit 2013 Keystone Laredo W/ 4400lb AL-KO Axles
Looking for replacement brake assembly for AL-KO 9012 hub 4400 lb axle, thanks | I would be happy to help! The Dexter Nev-R-Adjust Electric Trailer Brake Kit # K23-478-479 you were looking at are the correct replacement brake assemblies for...
Recommended Cover for a 2019 Keystone Laredo 325RL 5th Wheel
I am in need of a storage cover that will fit and protect my 2019 Keystone Laredo 325RL. This is NOT a toy hauler. Length 36.67 feet 440 inches Width 8 feet 96 inches Height 13 feet 156 inches I do not know if the height includes the 2 AC...
Recommended Self Adjusting Brakes for Al-Ko 4,400 lb Axles
I have a 2013 Keystone Laredo 5th Wheel 289SRE— I am looking for the self adjusting brakes and the drums for it. I’m thinking they’re 4400 pound axles. | Michael, so you are correct you do have 4,400 lb axles so you can use the Dexter Nev-R-Adjust...
How To Wire A 12V DC Tankless Water Heater In An RV That Previously Had A 120V Water Heater
I currently have a gas electric hot water heater. The electric is 120 volt. The tankless units are gas and 12V DC. Will I need to find or run a 12V DC source from somewhere or should there already be a 12V DC source at the present unit.? | For...
What Parts Do I Need To Install My New Tankless Water Heater With The Pressure Relief Valve In Back
My present hot water heater has the pressure relief valve venting out of the front of the unit. Thoughts on how to work the logistic of routing the vent plumbing from the back when replacing with a tankless unit? | You will use Camco RV Water...
Recommended Tankless Water Heater For 2018 Keystone Laredo Fifth Wheel RV
What tankless water heater would be recommend for A 2018 Keystone Laredo 5th wheel? Currently has factory installed gas/electric type model. | There are a few options when it comes to finding a tankless water heater for your 2018 Keystone Laredo...
Filter Your Search
Contact and Help