How To Stop A-Frame Trailer Tongue Jack from Bottoming Out
I have a 2015 Clipper travel trailer that I tow with a 2015 Chevy traverse. Occasionally I hit the tongue jack will pulling it in or out of spots. Do you have any replacement Jacks or ideas to give me a little more clearance? Thanks | Yes, the...
Recommended Replacement Tongue Jack For Additional Ground Clearance On Angle Iron Trailer Frame
I had a strange incident towing my small homemade camping trailer. The jack hit a rail on a cattle guard and broke the hitch pin, causing the trailer to come loose and drag on the jack, bending it. Thankfully the chains held and that someone...
Height of Ultimate Trailer Jack # 322-RDJ-2K When Positioned at Lowest Setting
On the Ultimate A-frame trailer jack, can you tell me the measurement from the mounting bracket to the top of the jack when the jack is fully extended down? Also, what is the measurement from the mounting bracket to the bottom of the jack without...
Recommended A-Frame Tongue Jack for American Hauler Trailer
Hi I’m looking for a new trailer jack for my American hauler The three point bolted on one is bent and doesn’t work now. Which jack would work and is there one that a wheel or like a quick and raise before you have to start cranking it? Thanks...
How to Add Clearance so Truck Tailgate Does Not Contact Jack
Cut the rack tube. My issue is I need a short top side of the jack to insure my truck tailgate will open while hitched to my A-liner trailer and not contact the jack.This jack seems to be a perfect jack to customize the jack height while having...
What is Shortest Bracket Height Trailer Jack with Caster Wheel
Hi. I need a trailer jack. Its for a cement mixer. the tongue of the cement mixer is very low to the ground. I have a jack on another nixer and works well. But that tongue is higher up from the ground. I need a trailer jack with a 6” wheel...
Replacement Handle For Ultimate Trailer Jack # 322-RDJ-2K
Can I order a replacement handle for this jack? The handle fell off of mine on the highway. | The knob on the handle of the Ultimate Trailer Jack # 322-RDJ-2K you have is not replaceable by itself, but you can replace the entire handle using...
I have an A frame jack on a W-W stock trailer that was built back in the 80s. The handle turns with good tolerances no slop, but the handle turns but no action on the jack. will go down under load , not up. the diameter of the tube is 1.625....
Installing 322-RDJ-2K Ultimate Trailer Jack
I just purchased the jack and installed it. Then yeah then I read the instructions and noticed that they state 4 - CRITICAL you/I must Remove plastic retainer and apply either thread lock tape or locking compound to the threads of retainer bolt....
Sidewind A-Frame Trailer Jack for 10,000 lb Trailer
I need a jack with less then 8” of clearance from A-frame flange to top of jack that can handle a 10,000 gvwr on trailer for tailgate clearance was looking at the ultimate trailer jack, that meets my clearance issues but I only have 2.5” of...
Recommended A-Frame Trailer Jack for Applications with Limited Ground Clearance
What is the shortest bolt-on a-frame jack you have from the bottom of the mounting plate to the bottom of the extendable leg when retracted? My current jack is too long and often hits the ground when towing. Can be light duty, 2000lbs or less....
Side Wind Bolt-On Trailer Jack for Trailer with Limited Ground Clearance
Do you have jack with the same functionality, but as a sidewinder? | I do have an option for you but I am not aware or any side mount trailer jacks similar to the Ultimate Trailer Jack part # 322-RDJ-2K in regards to how the mounting bracket...
Replacement Bolt Size for Topwind Handle on Ultimate Trailer Jack
Do you know what size bolt is needed to mount the handle on the top of the jack? My friend borrowed my trailer and broke it off and I need to replace when I pick it up. | The bolt that holds the handle to the top of the Ultimate Trailer Jack...
Top Mount Trailer Hitch Crank Handle For Enclosed Racecar Trailer
Hey guys I am looking for a top mount trailer hitch crank handle for my enclosed racecar trailer. I have some pics if needed. Current crank handle is a bolt mount fulton handle. Trailer weight full is probably around 8000lbs or so. Thanks |...
Recommended Trailer Jack Allowing for Truck Tailgate Clearance for Homesteader Trailer
I have an older homesteader trailer and the jack gave out. Can you please recommend a leg jack with clearance for a tailgate? Hopefully the pictures help. | Unfortunately I did not get the pictures, but I do have an idea of what you are looking...
Shortest Retracted Height Trailer Jack
I have a very light trailer I put my 14 foot Jon boat on and move it about with my 4 wheeler. I have found that, often times, the jacks dont come down far enough to easily hook up the ball to the hitch. Do you have a jack that would have a small...
Wheel Caster to be Used with Ultimate Trailer Jack
What wheel do you recommend for the ultimate trailer jack? Thanks | The wheel caster you need is the part # JC-102 to be used with the Ultimate Trailer Jack # 322-RDJ-2K. |
Ultimate Trailer Jack For 2018 Keystone Bullet Crossfire 2200BH Travel Trailer
Hello, I am trying to find a suitable manual tongue-jack for my 2018 Keystone Bullet Crossfire 2200BH travel trailer. I believe that the following product you offer would work, could anyone there help confirm? Item # 322-RDJ-2K Thank you!...
Ultimate Trailer Jack # 322-RDJ-2K Pin Function and Security
How long is the pin that s into the tube? My concern is the risk of someone bumping the little handle, causing the outer tube to release under load or movement in the trailer causing the tube to rock, possibly allowing the pin to come out enough...
What Top Wind Jack that you Offer has the Shortest Retracted Bracket Height
Im looking for a top wind A frame trailer jack. What is the shortest retracted length is that you have? | The Ultimate Trailer Jack part # 322-RDJ-2K has a retracted height of just 1-3/4" it has by far the shortest retracted length of any of...
Could Carriage Bolts be Used to Install Ultimate Trailer Jack # 322-RDJ-2K
Will carriage bolts work for installation? | You could use carriage bolts to install the Ultimate Trailer Jack - A-Frame # 322-RDJ-2K as long as you went with bolts that fit the slots of the jack's mounting flange properly. |
What Size Mounting Hardware For Ultimate Trailer Jack A-Frame 322-RDJ-2K
What size bolts do you need to mount this jack? | The Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2" Lift - 2,000 lbs # 322-RDJ-2K you were looking at requires 3/8" hardware that is at least grade 5, but you will need to pick them up from...
Does Jack Height Matter When Picking Out A-Frame Trailer Jack
I want to buy an a frame trailer jack. I see different heights. Do I measure how high the jack I have now goes up. And my trailer can hold 10000 lbs so I would get a 10000lb jack. Thank you | In general you don't have to verify the height range...
A-Frame Trailer Jack that Has Lowest Height to Fit Under Tailgate
I’m interested in an A frame jack My current jack hits just barely my truck tailgate My current jack measurement from mounting bracket to top of handle is 13” Do you have any jacks that are approximately 11 1/2 “ from mount bracket to top...
Filter Your Search
Contact and Help