Can Trailer Valet XL Be Used with Tandem Axle Trailer
Hi, i am looking for a trailer dolly like the trailer valet to navigate my vehicle open trailer 2 axel - Trailex around my parking garage. It is a completely flat surface, but am wondering if there are any issues. IE Dual axel trailer compatibility...
Can Trailer Valet RVR9 Remote-Controlled Trailer Dolly be Used on 9k Triple Axle Trailer
My car trailer is a triple axel, 32foot long weights empty 9-9500 lbs my question to you folks is will the TVRVR9 handle the load and will it work with triple axels, or do you think I will be maxing things out. i am on asphalt and fairly level....
Recommended Trailer Dolly with Brakes for Moving 2000 Pound Trailer on Incline
I want to move our 15foot A-Liner 2000# into place in our driveway. The driveway has a slight incline so Im concerned about it getting away from me. Do any of the dollies have brakes or any kind of emergency stop system? | We actually carry...
Why are the SnapPad SnapJack for RV Scissor Jack Stabilizers Available in a 2 Pack Instead of a 4
Why don’t you sell them in a pack of 4 most all campers with scissor jacks come with 4 of them | The SnapPad SnapJack for RV Scissor Jack Stabilizers # SN65FR are made available to us from the manufacturer in packs of 2. I do not know their...
Trailer Valet to Move a Boat Trailer Around in a Garage
I have a 20’ wake board boat and am trying to squeeze it into my garage. I have to get it in at an angle make it fit in my garage. My plans is to back it in and use the trailer valet to push the tongue towards the corner. Would this work good...
Is the Trailer Valet Trailer Dolly Hard to Crank and Can it Move a Trailer Across a Lawn
Does it take a lot of strength to crank and turn the Trailer Valet? I am a 62 year old woman, but Im in good shape and can easily raise and lower my Parkliner 15 camper. I have a tight turn in to my driveway, and a slight dip at the entrance...
Replacement Bracket for Trailer Valet 5X Swivel Jack #STC-V211
Can you provide and extra trailer frame bracket for a Trailer Valet 5x, and if so, how much$$$ Thanks. | The replacement bracket that you are looking for is part # TV-0002. The price is on the product page. |
Trailer Valet XL Minimum Hitch Ball Height
What is the lowest height you can set the ball height on the trailer Valet XL? I have a Scamp Camper and the ball height is 16. | The lowest height for the hitch ball on the Trailer Valet XL Trailer Dolly with Chain Drive - 2" Hitch Ball -...
Is the Trailer Valet XL the Best Option to Move a 3,000 lbs Trailer 50 Feet Through Grass and Gravel
Hello, I am considering purchasing a trailer valet XL. Since it is a sizeable investment I want to make sure that it will work for my current setup. 1. I currently own a 3000lb hybrid trailer that I need to move approximately 50 feet from...
Recommendation for Moving a Trailer Since Wheels are Not Available on Powered A-Frame Jacks
I need a powered jack like this but I need a caster wheel so the trailer can be moved when disconnected. is anything available? | Electric A-Frame trailer jacks generally do not come with wheels or have options for wheels. The reason is that...
SnapPad that Fits Replacement Foot Plate for Lippert Power Gear Hydraulic Jack # LC359344
what size snap pad fits on these replacement jack feet? Part number LC359344. Thanks | Since the diameter of the replacement foot pad part # LC359344 that you referenced is 10-1/2 inches the correct SnapPad would be the # SP84FR4. |
SnapPad Set that Fits 12 inch and 9 inch Feet
I would like to get snap pads for my motorhome however the front 2 are 9 the back 2 are 12 could I just get the 4 ? and if so how much would they be? Thanks | We have a Snappad kit that comes with two pads for a 12 inch foot and two pads for...
Can the Trailer Valet 5X # STC-V211 Be Used on a Trailer with a 5,100-lb GVWR
we have a trailer that is gross weight of 5100 will the valet 5x swivel jack work | The Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211 that you referenced has a maximum Tongue Weight (TW) capacity of 500 lbs. Since a properly loaded...
Will the 10" SnapPad Jack Stand Pads Work On a 9-7/8" Foot
Hello, I have a class A Newmar Baystar Sport, I measured the octagon foot at 9-7/8, will this bad work? Thank you | The SnapPad Jack Stand Pads for 5th Wheel or Motorhome part # SP64FR84 should work just fine on a 9-7/8" foot pad. |
Lubrication and Greasing Recommendations for a Trailer Valet JXC Trailer Jack
Hi I purchased one of these last year and was curious on the maintenance. I see there is what looks like a grease zerk and was wondering what I should use for use to get it in there to keep things lubricated. Thank you Have a good day | There...
Fit of SnapPad EQ Octagon for 2019 Super C Renegade Verona 36VSB
I wanted to confirm that the SnapPad SN76FR product is the correct one for my application. I have a 2019 Super C Renegade Verona 36VSB which has 10inch octagonal leveling system pads. Is this the correct part number? | Yes, the SnapPad EQ,...
Are SnapPads Able To Be Removed And Reinstalled Again
If I took the snap pad off and decided to put it back on later will it snap back on or once I’ve removed it i can’t use it again and have to buy another to make sure it fits back? | SnapPads like the SnapPad XTRA Jack Pads for Lippert Leveling...
Is the 5x Trailer Valet the Same as the V211
Trailer Valet 5X Online the V211 is listed, on their official website its the 5X. What is the difference? Which version is the latest? Thanks | The Trailer Valet 5X replaced the V211. Our part # STC-V211 is the 5X and would be the latest...
Installation of Trailer Valet Remote Controlled Trailer Dolly and Use Of Spanner Wrench
How to attach to boat trailer for first time and how to use the spanner wrench. The video on youtube does not show enough detail and goes too fast to see details. Thank you | The Trailer Valet RVR3 Remote-Controlled Trailer Dolly - Wireless...
Could Trailer Valet 5x Be Used on 5,000 lb Trailer
I am considering a Trailer Valet 5x for my 26foot Tritoon. The total package weight of the boat, trailer and engine is just over 5000 pounds. Will this product be adequate? | That's going to be really close to the capacity for the Trailer Valet...
How to Determine Which SnapPads Will Work with a 2023 Newmar Baystar 3629
will they fit a 2023 Bay Star 3629 | If you have 10" octagonal or concave round jack feet on your Baystar, then the SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet # SN76FR will work great. If not, you're...
A-Frame Mounted Trailer Jacks With Side Wind Handle Which Can Be Switched For a Drill Attachment
Is this Jack made in a sidewind model that will accept a drill? | The 2K # TV54FR and 5K # TV94FR Trailer Valet JXC Trailer Jacks are currently the only A-Frame jacks we carry which can be operated with a drill. We do not have any options like...
Can You Replace The Pneumatic Tires On The Trailer Valet 5X Swivel Jack With Solid Rubber Tires?
I spoke with Trailer Valet support today and they said the solid rubber tires will fit as replacements for the original pneumatic tires that came with the 5X, which I purchased from you in 2017. This has been confirmed by people on Youtube videos...
Weight Capacity of Rack'Em Manual Tow Dolly
Does the listed weight capacity for a trailer dolly refer to the trailers gross weight or hitch weight? My TT has a dry weight of 3200 lbs. and hitch weight of 409 lbs, and Im trying to determine if a powered dolly would be required to move...
Filter Your Search
Contact and Help