Ramp Springs for the Front and Rear of a Snowmobile Trailer
I just built a enclosed snowmobile trailer and need spring assembly I have a opening of 82 inch for rear door and52 inch front door witch spring assembly can I use for the doors. thank you | For the rear opening I recommend using enclosed trailer...
Why are the SnapPad SnapJack for RV Scissor Jack Stabilizers Available in a 2 Pack Instead of a 4
Why don’t you sell them in a pack of 4 most all campers with scissor jacks come with 4 of them | The SnapPad SnapJack for RV Scissor Jack Stabilizers # SN65FR are made available to us from the manufacturer in packs of 2. I do not know their...
1990 Kingston Trailer Ramp Lift Assist Options
Hi I have a 1990 Kingston horse trailer ramp load that I believe the spring under the ramp needs to be replaced. the ramp feels unusually heavy to lift once its down and I wouldnt be able to lift it in emergency if I had a horse in the trailer....
Dimensions For Trailer Ramp Spring On 18 Foot Haulmark Trailer
WHAT SIZE SPRING GOES ON THE RAMP DOOR FOR THIS TRAILER 18FT HAULMARK TRAILER | You will need to measure to be sure, but I believe the Enclosed Trailer Ramp Spring - Dual Spring, 81" Wide # ERS120D81 will fit your 18 foot Haulmark Trailer and...
Recommended Spring to Help Close Ramp on a 2006 Gearbox Toy Hauler
Hi, I need some assistance with a 2006 Gearbox Toy Hauler. The rear ramp is entirely to heavy to lift for TWO people to lift, it has two coil springs on either side of the ramp, but they are useless. Its a factory ramp with no modifications....
Recommended Size of Ramp Spring for 7 x 16-Foot Enclosed Trailer
what size ramp spring fits a 7x16 enclosed trailor? | Since a 7-foot trailer width is 84-inches the nearest ramp spring size will be the 81-inch size like # ERS120D81. The linked review video will give you details on this item. All ramps springs...
SnapPad that Fits Replacement Foot Plate for Lippert Power Gear Hydraulic Jack # LC359344
what size snap pad fits on these replacement jack feet? Part number LC359344. Thanks | Since the diameter of the replacement foot pad part # LC359344 that you referenced is 10-1/2 inches the correct SnapPad would be the # SP84FR4. |
Overhead Door Springs On Enclosed Trailer Frequently Breaking
I need some info about ramp door springs. My enclosed trailer has garage door springs over head and they are frequently breaking. I wand to add the trailer ramp springs. I see part number RS16933RH My hinges have much smaller hinge pins,...
SnapPad Set that Fits 12 inch and 9 inch Feet
I would like to get snap pads for my motorhome however the front 2 are 9 the back 2 are 12 could I just get the 4 ? and if so how much would they be? Thanks | We have a Snappad kit that comes with two pads for a 12 inch foot and two pads for...
Will the 10" SnapPad Jack Stand Pads Work On a 9-7/8" Foot
Hello, I have a class A Newmar Baystar Sport, I measured the octagon foot at 9-7/8, will this bad work? Thank you | The SnapPad Jack Stand Pads for 5th Wheel or Motorhome part # SP64FR84 should work just fine on a 9-7/8" foot pad. |
Fit of SnapPad EQ Octagon for 2019 Super C Renegade Verona 36VSB
I wanted to confirm that the SnapPad SN76FR product is the correct one for my application. I have a 2019 Super C Renegade Verona 36VSB which has 10inch octagonal leveling system pads. Is this the correct part number? | Yes, the SnapPad EQ,...
Are SnapPads Able To Be Removed And Reinstalled Again
If I took the snap pad off and decided to put it back on later will it snap back on or once I’ve removed it i can’t use it again and have to buy another to make sure it fits back? | SnapPads like the SnapPad XTRA Jack Pads for Lippert Leveling...
Are Mounting Brackets on Enclosed Trailer Ramp Spring # CB250D96SHD Adjustable
Ive just purchased a new 8 foot wide trailer and would like to upgrade to the double spring for safety the ramp door is HEAVY. There are brackets welded to the frame where the weld points are 83 inches apart. Is there any adjustability in the...
Recommended Ramp Door Spring for 6x12 Enclosed Trailer
Can you tell me what size spring assist assembly do I need for a 6x12 enclosed trailer? Thanks | When selecting ramp springs for a trailer ramp, you will want to know the diameter of your hinge pin and how much space you have available in the...
How to Determine Which SnapPads Will Work with a 2023 Newmar Baystar 3629
will they fit a 2023 Bay Star 3629 | If you have 10" octagonal or concave round jack feet on your Baystar, then the SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet # SN76FR will work great. If not, you're...
Are Single SnapPad Replacements Available For Purchase
Had tire blow out on our 5th wheel. Lost one 9 jack pad. Do you sell single replacements. thanks | Yes, we carry replacement 9" round SnapPads with part # SP54FR. |
When Does the Spring Tighten and Loosen on an Enclosed Trailer Ramp Spring
with the cable unraveling from the bottom of the spool when opening the door... does the spring tighten or loosen relative to the end of spring attached to the mounting bracket? thank you........ | On a torsion spring like that on # CB250D96SHD...
Ramp Springs Compatible With 1982 Circle J 2-Horse Trailer
I need 2 horse trailer ramp springs. They are for 1982 circle J trailer. They are 1 inch by 11 inches with 47 total coils. Any ideas where I can find them? Thank You | I have a couple solutions for you, but we don't carry the exact springs...
Compatibility of Lippert Ground Control Leveling System on a 2004 Forest River 37F 5TH Wheel
Will this fit on a 2004 Forest River 37F Fifth Wheel Toy Hauler? | Yes, the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC675817 will work with your 2004 Forest River 37F Toy Hauler 5th wheel. Since your GVWR is 15,900lbs...
How To Choose Correct Ramp Door Spring for a Nitro Toy Hauler Trailer
I have a 2022 XLR Nitro Toy Hauler will this ramp door spring work on my model camper | The Conventional Ramp Door Spring part # CB250D96SHD is designed for a trailer door measuring 80" to 96" wide with a hinged weight up to 250 lbs. In order...
Gauge Steel Used for etrailer Scissor Stabilizer Jacks, Mounting Hardware, and Base Pads
What gauge steel are these made out of. Looking online there are many choices to choose from that have different gauge steel construction. Do these come with self-taping screws if not do you have screws available. Also, what would be recommendation...
Width of Doors That Dual Spring Enclosed Trailer Ramp Spring Works With
Can this unit be narrowed up to fit the same place as the 66 inch single version? It appears to be so, just want to be sure. Thanks | I am not 100 percent sure what you mean be fitting the same place as the 66" Enclosed Trailer Ramp Spring...
Leveling System Jack Pads For 2017 Thor Miramar 34.2 w/ Lippert Level Up Hydraulic Leveling 9" Round
I have a 2017 Thor Miramar 34.2 with LCI auto level system, what model is it? | Based on the information I could find it appears your 2017 Thor Miramar 34.2 it uses the Lippert Level Up hydraulic leveling system. As I see you were looking at...
What is the Purpose of Trailer Ramp Springs
what are the technical functions of the cables? i.e. for stability only, to hold door shut, to help opening door , etc. Thx | The cable part # CAB1-8CB150 is a replacement for springs like # CB250D96SHD which is designed to help make raising...
Filter Your Search
Contact and Help