Lippert Road Armor 1116 19k Pin Box Replacement Recommendation
I have a Montana High Country 294rl with a factory road armor pin box. Im wondering the correct Airborne Sidewinder model is to replace it with. Thank you Also what trailer GVWR Is the 5th Airborne Sidewinder rated for? I realize it’s a 16k...
Low Profile Landing Gear For 2010 Jayco Eagle 5th Wheel Trailer
I have a 2010 Jayco Eagle 5th wheel with from what I can piece together has an atwood landing gear system. The weld stops seem like they will fit perfectly on the RP500708, however I am worried about overhead clearance. The old system used...
Trailer Hitch Extension and Weight Distribution for 2015 Ford F350 With Truck Bed Camper
I have a 2015 F350 long box and will be putting an Arctic Fox 990 camper on it. So roughly I will need a 24 extension for my hitch. I have been reading about weight distribution hitches with extensions but do not really understand. I would...
Using a Reese Goose Box With a 2021 GMC Sierra Short Bed
Will I have enough clearance using the Reese goose neck pin box on my 2021 GMC with OEM install? Both bedrails and turning radius. Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter - Lippert 1621 and 0719 - 20,000 lbs Item # RP85FR...
Is A Weight Distribution Hitch Required When Towing RV with 2018 Ford F-150?
Do i need a weight distribution hitch ? Vehicle is 2018 Ford F-150 4x4 3.5 L V 6 eco boost. 7000 GVWR, Max trailer pkg. Im towing RV tear trailer. Dry wt.3000 lbs. tongue wt.325 lbs. !8foot single axle.....If so which would you recommend?...
Trailer Hitch and Wiring for 2020 Nissan Frontier for 6,500 lb Trailer
hello, i am looking for a hitch and a trailer wiring harness for my 2020 fro tier sv, 2wd. looking to be above or around 6500 towing cap. thank you! | For your 2020 Nissan Frontier the only hitch solution that would give you the needed capacity...
Replacement Hardware Kit for Reese Fifth Wheel Rail Kit # RP56001-53
I’m looking for an installation kit for kit rp56001-53 I have the rails and brackets I just need the mounting hardware | For the Reese fifth wheel rail kit part # RP56001-53 we do have replacement hardware for it with the part # RP56001F. |
Can Curt Q20 Fixed 5th Wheel Fit Short Bed 2021 Ford F-350 With OEM Puck System
Why cant the CURT Q20 be used on my short bed F-350? The BandW Companion and Reese M5 20K can be used with a short bed? | It can; if you'd like to you can use the fixed Curt Q20 hitch in your 2021 Ford F-350 short bed with the factory puck system;...
Hitch Solution for RV with Sealed Lower Panel Covering Rear Frame
Hello, Id like to tow a trailer for ATVs or a boat trailer. But Im unsure which hitch and where to bolt on the accessory hitch on the back of my 5th Wheel camper. The trailer bumper is attached/welded to the bottom of the i-beam with 2x4 tubes...
Can a Curt E Series Fifth Wheel Hitch be Used with a Sidewinder
Hello It says the sidewinder is not to be used with the curt q5 5th wheel hitch I have the Curt e16 5th wheel hitch part number 16115 , will the sidewinder work with this model of Curt hitch I know that the q5 has more tilt capacity than...
Fifth Wheel Recommendations for a 2016 Ford F-350 with Hitch Prep Short Bed
Hi. Im buying a new F350 short bed truck with the factory prepped fifth wheel option. I think Id still like slider ability and exploring my options. I currently have a slider in my old truck but hardly ever use it - but for piece of mind... I...
Fifth Wheel Hitch and Rail Kit Recommendation for a 2015 GMC Sierra 2500 Short Bed
I have a 2015 GMC Crew Cab Standard Box 4wd with Duramax/Allison, can I tow a 39foot Montana Fifth wheel that can max out at 16000 lbs?? | Most likely yes, but you are going to need to check the owners manual of your truck to be certain. Without...
Recommended Weight Distribution System for a 2019 Wildwood 28RLSS
Will this hitch work properly with my trailer? The dry weight is 6389lbs and the payload is 1373lbs. I want to make sure this hitch will cover that range of tongue weights and drive properly. Thank you! | The Fastway e2 # FA94-00-1061 is definitely...
I’m leaning towards the goose box. My pin box item number is 251256. Can you tel me if it is a 1621? Regards | I was unable to locate anything about the 251256 number you provided, unfortunately. That being said, there are other ways to identify...
Is the 20k Reese Goose Box RP85FR the 3rd Generation of Goose Box?
Just wanted to confirm the part number for the 3rd Generation Reese 20K Goose box? | That is a good question, and yes, the 20k Goose Box is the latest (3rd generation) of the Goose Box; the correct part for the 20k model is the following: -...
Friction Sway Control For Reese Round Bar Weight Distribution RE44FR
I already have a Reese Pro Round Bar Weight Distribution w Sway Control - Round Bar - 11,500 lbs GTW, 1,150 lbs TW. I am towing a Bullet 1700bh that weighs 3300 dry. I am towing with a 2011 Ford E350 extended. Everything is great, but there...
Recommended Weight Distribution System for 2011 Toyota Highlander
Hi There. I have a 2011 Highlander with a E-Trailer brand hitch rated for 5000lb gtw/500lb tw. Im looking at renting a Wolf Pup camp trailer with a single axle and a 3000lb dry weight. I am wondering if the Reese Pro Round Bar Weight Distribution...
What Base Rails do you Recommend for my 2019 Ram 1500
Afternoon I have a 2019 ram 1500 and I am looking for a fifth wheel installation kit. I have used curt in the past on all my other ram trucks but I am not seeing one for this. Am I missing it or is it not available? Thanks | As of April 2020...
Weight of Brophy Hitch Adapter 1-5/8" to 2" # HT58
Hello I’m looking to purchase that 1 5/8” to 2” Hitch adapter and bring it with me to Ecuador in my suitcase can you tell me how much it weighs? Thank you | The Brophy Hitch Adapter 1-5/8" to 2", item # HT58 weighs close to 6.5 lbs. It's not...
Troubleshooting Reese Sliding 5th Wheel Hitch That Won't Lock Into Place
What causes the slide lock to unlock while in motion | The legs of the Reese 5th Wheel Trailer Hitch w/ Square Tube Slider # RP30051 have a spring loaded latch to lock the legs in place so you're either not getting it fully lined up in place...
Where Does Fifth Wheel Hitch Jaw Center Normally Align with Rear Axle
I have a 2005 2500hd silverado with a long bed. Im installing 16K husky stationary fith wheel. Drawing a line for the center of the axel Im showing the center of the fifth wheel pin 1 1/2 to 1 3/4 inches in front of the axel. Am I OK. Thank...
Recommended Weight Distribution Shank for a 2-1/2 Inch Hitch Receiver
My current truck has a 2-inch receiver and I use a weight distribution hitch when I pull a trailer. The truck that I have on order has a 2-1/2-inch receiver. Would this be the only piece that I would need to change and would it work with my...
Weight Distribution Recommendation for 2015 GMC Yukon Towing 7,000 lb Trailer
what setup do you recommend for a GMC Yukon Denali with 22 inch wheels. I am towing a boat with combined weight of 7000# +. I need a weight distribution hitch since the vehicle recommends that over a regular hitch with greater than 600# tongue...
Adapter Recommendation for Fitting Reese 30032 Hitch to Ford Factory Rail Kit of F-450
Hi I have an older Reese 30032 hitch for standard rails can I adapt it to the ford factory pucks? Truck is a 17 f450 | Yes, with the Reese adapter part # RP30156 that you referenced you can adapt the Ford factory rail kit you have in your 2017...
Filter Your Search
Contact and Help