Recommended Wiring and Brake Controller for Towing With 2003 Chevy S-10 ZR2
I have a 2003 Chevy S-10 ZR2. We have a 15 RiversideRV Retro camper single axle. Im a complete beginner on towing, but not untechnical. There is a 7-pin blade coming from trailer. I noticed a couple of 4-wire connectors at the back of the truck....
Parts Needed to Flat Tow a 2000 Chevy S-10 Behind an RV
Will the curt is tow bar work on a 2000 s10 | Curt Tow Bar # C19745 isn't vehicle specific so you can use it on your 2000 Chevy S-10. It comes with universal bumper brackets that will need to mount to a flat, metal section of the vehicle bumper...
Recommended 50 Amp Circuit Breaker for Larin Hitch Lift
Truck S-10 model 2000, single cabin the installation manual request customer to provide for: 1. 50 amp circuit breaker and two 2 6 AWG battery terminals with 5/16 opening. Is this the correct breaker for application? Any recommendation is...
Trailer Hitch Recommendation for a 2003 Chevy S-10 with Factory Step Bumper
Hi, I am shopping for a hitch for my 2003 Chevy S-10 standard bed. I will be towing a kayak trailer with up to 4 kayaks. What do you recommend? Thanks, | The most popular hitch we offer for your 2003 Chevy S-10 that would work great is the...
Flat Towing a 2002 Chevy S-10 2WD Behind a Motor Home Recommendations
Can I tow my 2002 Chey S-10 automatic behind my motor home without an auxilary transmission pump? | I did some checking and it looks like the only way to flat tow your 2002 Chevy S10 is with a lube pump. Check the owners manual of your truck...
Suspension Enhancement for a 2003 Chevy S-10 4x4 ZR2
do these fit my 2003 chevy s10 4x4 zr2? | The Air Lift Vehicle Suspension, # AL59531, is designed to fit the 2003 Chevy S-10 4x4 as long as it does not have a track bar. A track bar is a part of vehicle suspension on some vehicles that is designed...
Help Picking Out Trailer Hitch for 1997 Chevy S-10 with Sportside and Roll Pan Bumper
I have a 97 chevy s10. I call it a stepside but is it also called a sportside? It has a roll pan rear bumper and Im looking for the right trailer hitch to put on it. Not sure which one is the right one. | Sounds like you have the Sportside with...
Will RoadActive Suspension Kit Raise 2001 Chevrolet S-10
Will this product raise the ride height any at all | The RoadActive Suspension Kit # RAS4527-T will typically raise the rear of your 2001 Chevy S-10 about 1/2 to 3/4 of an inch. If you would like to raise your truck the tension can be adjusted...
Quick Link Recommendations for a Roadmaster Base Plate Kit Short Safety Cables
It seems that I need 4 of those Chain links things that tighten and you only supply 2. I have looked at several videos and they show a chain link one each end of each of the short safety cables. Did I not receive them or do you only provide...
Do the Air Lift Ride Control Springs Require Drilling to Install on a 2001 Chevy S-10 4WD
Hi, does this kit just bolt on? I have a 2001 s-10 crew cab 4x4. Do I need to drill holes in the frame for this to work? Thanks | You will need to drill a few holes to install these Air Lift Ride Control Air Helper Springs # AL59535. Check out...
Installing 7-Way Connector and Trailer Brake Controller on 1996 Chevy S-10 Pickup
Hi, I read the information you posted here but wanted to email directly as you suggested since I am looking to access the brakes on the trailer. Here are the specs: Truck is a 1996 Chevy S10 pickup with 2WD LS. It has a pretty beat up looking...
Trailer Wiring Options for a 1998 Chevy S-10
My s10 is marked 12/97. So 98 modle.. Iv looked at both wiring modle harnesses.. These all have round connectors. Under my truck I have flat connectors on left and right side. Also 1 bigger female connector n the middle.. Bigger that average...
What Size Hitch Ball Will Fit my 2002 Chevrolet S-10 Bumper Ball Hole
I have a chevy s-10 2002 ext cab and I need to know which hitch ball will fit my bumper..I liked the way this one looks and thats its stainless steel..I am not sure if it will fit.. thanks.. | In order to make a proper selection for a hitch...
Recommended Trailer Hitch Receiver for 2002 Chevy S-10 Truck
I was watching the installation video of a Hidden Hitch 87525 for a 2002 Chevy S10 on Youtube. Is this model no longer available from etrailer.com? I dont see it listed. I have the same vehicle with the same rear bumper depicted in the installation...
Trailer Hitch Recommendation for 2001 Chevy S-10 with Factory Step Bumper
Heya, Looking at the bottom of my step bumper I dont see how this will attach properly. The step bumper appears to be hollow on the bottom, rather than a flat stock and has tabs extending down at angles with holes in them, presumably for bolting...
Locking Tailgate Lock Options for a 1996 Chevy S-10
Do you sell similar product for 1996 chevy s-10. If you do can you send me details and price? | We have a couple of different tailgate lock options for a 1996 Chevy S-10. First is the Pop and Lock Powered Lock, # PAL8150. This lock wires into...
Troubleshooting Wiring Harness on 2003 Chevy S-10
I just purchased part #118359 wiring harness and trailer connecter for my 2003 Chevy S10. The lights come on and the turn signals work well. However, when I press the brake, all of the lights go out. Can you tell me how to fix the problem?...
I am looking for this part or similar 1403235-4 | I am sorry Juan but we do not have Lund tonneau covers or any replacement parts that will work with them. |
Brake Controller and Wiring Recommendation for 2003 Chevy S-10 with 7-Way
Ive recently purchased a 2003 Chevy s-10 pickup and I intend to occasionally pull a 16 foot trailer with one axle braking. It has a Hopkins 4/7 connector like you show for Code 30955. Assuming it is installed correctly, what brake controller...
Is the Roadmaster Tracker Tow Bar Compatibile with Standard Base Plate 161-2 for a 1998 Chevy S10
had a 1996 geo tracker with 118-1 base plates and the tracker tow bar, now have a 1998 chevy s10 i think i need the 161-2 base plates can i use the tracker bar from the geo | Yes, the Tracker Tow Bar, part # RM-020 that you use with your Geo...
Will Tow Ready T-One Wiring Harness Fit 2003 Chevrolet S-10 Xtreme
will this work on 2003 s10 xtreme? 2003 Chevrolet S-10 Pickup T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Code: 118359 | The Tow Ready T-One Wiring Harness, part # 118359 is designed to fit your S-10 Xtreme. You just...
Supplementary Braking System for Flat Towing a 1994 Chevrolet S-10 Pickup
required for flat towing? | The Roadmaster Even Brake Portable Proportional Braking System # RM-9400 that you referenced is among the easiest-to-use supplementary braking systems available for flat-towing. This is one of the components required...
Base Plates Recommendation For 1994 Chevrolet S-10 Pickup To Use With Falcon Tow Bar
Hello I have a 1994 S-10 4x4 and a falcon towing kit That my wife got for a Toyota pickup.but the mounts to the truck does not fit. Can you tell me what fits my S-10 thanks | Since you said you have a Falcon Towing Kit, I assume you mean you...
Parts Needed to Install a Brake Controller on a 1996 Chevy S-10
I want to install this on a 96 chevy S10 for towing a 2 axle utility trailer with electric brakes on all 4 wheels. I looked under the dash and the only jack I saw was one with maybe a dozen pins that is used for computer trouble shooting diagnosis....
Filter Your Search
Contact and Help