Operating Mechanism Not Functioning On Maxxfan Deluxe Roof Vent System
MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke Lid. How do I adjust the range of the automatic opening and closing? After the lid is fully open or closed, the motor continues on and the lid snaps...
Availability of a Trailer Axle With at Least 5,000LB Capacity and 86-1/2" Hub Face To Hub Face
I am looking to replace these axles with at least 5000 capacity ones. Have a hard time finding a replacement that will match the distance hubs and springs. Can you help. Im ok with going from a 5 lug to a 6 lug. | We do have the Dexter 5,200lb...
Quick Disconnect Propane Hose That is 6 Feet or Longer
Do you carry this in a 6 or 8 foot length, or longer? | Yes, there is both a 6 foot, as well as a 10 foot version of the 4 foot MB Sturgis Quick Disconnect Propane Hose for Small Appliance # 100476-48-MBS. - 6 Foot: MB Sturgis Quick Disconnect...
Determining The Correct Baggage Slam Latch For A 2017 Dutchmen Kodiak Ultimate 288BHSL
What Baggage locking slam latch would I need for a 2017 Dutchmen Kodiak Ultimate 288BHSL? Im not finding the exact match anywhere? This would be for the front storage doors. Thanks | Manufacturers do not list the part numbers they use so we...
Should Friction Sway Control be Used with Dual Cam Setup of Strait Line
I have a strait line trunnion bar weight distribution system. I am towing with a 1500 suburban and a 31foot Cruiser RV Shadow Cruiser within weight limits. The sway is pretty bad and I was looking at adding a sway control bar. Is it bad to add...
Grease Seals for 2018 Dutchmen Kodiak Ultra Light Travel Trailer
What is the best way for me to identify what type of seals I need for my 2018 Duchman Kodiak Ultra Lite Travel Trailer. I know my axels are rated for 3500lbs. Im planning to repack the bearings. Thank you | The Grease Seals # RG06-050 are the...
Slide-Topper for a 2018 Cruiser RV Fun Finder Xtreme Lite Travel Trailer
I have a 2018 Cruiser Fun Finder with a slide that measures 96 inches flange to flange and a box width of 80 inches. Could you recommend a Solera slide topper for it? Black or white, either one is OK but prefer black. Also, does awning rail...
Auto Level Operation Of The Lippert Electric Ground Control TT Automatic Leveling System
I was wondering if it is normal when using this system and it completes its auto leveling process, my power tongue jack retracts and stays this way I understand this system supports the trailer but it seems odd the tongue jack essentially is...
How Does Go Power Automatic Transfer Switch # 34270278 Connect to Shore Power and Inverter
My previous invertor was a xantrex where the a/c power attached via a clip to the GFCI outlet. The system would charge my batteries via shore power or my generator. Could I put a plug on my a/c wires and plug into the GP 2000? If I used the...
Replacement Hub and Drum Assembly for Lippert 4.4K 136214 Hub and Drum
Hello, Part number off the Lippert hub is: 136214, 10 brakes, 6 bolt on 5.5, bearings L44649, L68149. Looking for a bearing installed pre greased to carry as a spare. Redline number that worked to get me out of a bind: HD84656BX | For your application...
Can 3,500 lb Hub and Drum Be Used for 4,400 lb Lippert Axle
Jon G got me the replacement part number for my Lippert brake hub but opens other questions. My Dutchman Kodiak Ultimate travel trailer has what Lippert calls 4400 LB axles with 84 spindles and hubs which are rated at 1750 lbs. or 3500 lbs....
Filter Your Search
Contact and Help