Can Chevrolet Bowtie LED Lighted Vehicle Emblem # RP86618 Wire to Vehicle Trailer Wiring
Can you wire this in to your trailer wiring harness tow light harness. | Yes, the Chevrolet Bowtie LED Lighted Vehicle Emblem # RP86618 that you referenced was actually designed to wire to trailer taillight harnesses so this would work well...
What Would Cause Bouncy Ride Quality When Towing Trailer with Weight Distribution System
I have a 2018 F150 3.5 Ecoboost, it is 2 wheel drive with a locking axle capability at least I think that is what it is called. I pull a 6000# TT using a Hensley Hitch so I do not really have a sway control issue any longer but I still get...
5th Wheel Base Rail Locations for Reese Setup on 2016 Ford F-350 Super Duty with 8' Bed
Installing a fifth wheel hitch, Reese 16K, in a 2016 Ford F-350 platinum 8 ft. Bed crew cab diesel. What is a good measurement to use from back edge of bed to back rail and then to front rail? I’ve gotten mixed remarks from different owners....
How To Determine What Reese Sidewinder Pin Box Fits a Dutchmen Royal 5th Wheel
I need to find out which sidewinder will fit my Dutchman Royal 270 1992. I do not see any markings on the pinbox | If there is no tag or sticker on the pin box itself that can be used to identity the model number then you will need to measure...
Will the Reese Semi-Custom Base Rail and Installation Kit Fit a 2019 Ram 1500
Does this part fit the2019 Classic Ram or the All-new Ram 1500 | The Reese Semi-Custom Base Rail and Installation Kit part # RP30035-386 is for a 2019 Ram 1500 Classic. That said, the kit requires you to drill into your frame which is not what...
Recommended B&W 5th Wheel Hitch for 2019 Ford F-250 4WD with 6-3/4 Foot Bed
Will the non slider work and allow 70 degree turns? Im pulling a 2020 Reflection 29RS there is 51inch from the pin to the corner. | Since your Ford F-250 is a 6-3/4-foot short bed and your Grand Design Reflection 29RS 5th wheel does not have...
5th Wheel Hitch Recommendation for a 2015 Chevy Silverado 1500 with 5-1/2' Bed
2015 silverado crew cab 5 1/2 ft bed Will a bandw slider work for this truck bed length | Since you have a 5-1/2' bed on your 2015 Chevy Silverado 1500 the only sliding 5th wheel hitch that has enough travel (22-1/2") to give you proper cab...
Can Air be Left in Reese Goose Box When Trailer is Stored
Is it ok to leave air in goose box when not in use or should you alway deflate? | It's perfectly fine to leave air in the bags of the Reese Goose Boxes like the part # RP85FR when storing the trailer. It will not have any effect on the air bags...
Is There a Curt Fifth Wheel Hitch that is Compatible with Sidewinder Pin Boxes
Ive been researching a fixed leg 5th wheel hitch for a morryde orbital kingpin box. After reading some of the questions and expert replies on etrailer Im a little confused. It was suggested that a curt q20 was good for a sidewinder kingpin...
Best Weight Distribution System Recommendation for Trailer that Weighs 4,200 lb
I have a 2010 Toyota Tundra. Trailer that needs pulled is a 4200 total weight if trailer with tongue weight of 1500 pounds. What type of sway bar would I need? | Is it possible you listed your tongue weight figure incorrectly? The tongue weight...
Recommend 16,000 lbs Goosebox for a 1621 Pin Box
My pin box is a Lippert Components, ROTAFLEX, LCI Part # 160468. Will the Reese 16K Goose box fit? Ive read posts that recommend the 20k. I think thats overkill, my trailer is only 12000 lbs. | Thanks for the pictures! I just spoke with my...
Correct Reese Goose Box 5th-Wheel-to-Gooseneck Adapter for Grand Design Reflections 324MBS
Which Reese Goosebox model is for the Grand Design 324mbs and do I need an adapter? | The Grand Design Reflections 324MBS should use a Lippert 1621 Pin Box and in which case the correct Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler...
Can 20k Fifth Wheel Hitch Tow 20k Fifth Wheel Trailer
Can reese gen 3 k20 gooseneck hitch be used with a 20k 5th wheel? I assume no as it does not have any safety factor. | If you are absolutely sure the trailer would never weigh more than 20,000 lb then a 20k hitch would be adequate but if there's...
Can the Top Quick-Disconnect Fitting on the MB Sturgis Sturgi-Stay T-Fitting Be Rotated
Can the quick connect fitting on the top rotate? Or do you have a fitting that is in reverse? My tank is on the right and regulator is on the left. So with this everything would be pointing in instead of out. Any solution? I already bought this...
Recommended 5th Wheel Hitch Rails For A 2022 Ram 1500
I just purchased a 2022 Ram 1500 and I want to be able to tow my 5th wheel travel trailer. I already have a Curt 5th wheel hitch. Which installation kit with base rails will i need and will my Curt 5th wheel hitch work with it? | When installing...
Longest Length for Propane Hose with 3/8 Inch NPT and 1/2 Inch FIF Fittings
I need a 18 ft Propane Adapter Hose 3/8 male NPT x 1/2 female flare swivel. Do you have one or can you make one? This is the supply line low pressure from output of regulator to bridge that feeds various appliances. Thanks | The longest propane...
Recommended OEM Fifth Wheel Hitch For A 2023 Ford F-450 With Minimal Trimming Of Bed Liner
Trying to decide between B&W and Reese for 24k lb 5th wheel hitch for puck systems but I also have bedrug in place and don't want to have to cut a bunch of it off to get the pucks to sit. Which will require the least amount of trimming? | The...
What Spacer Kit for Reese Sidewinder 5th Wheel King Pin with Rotating Turret
hi many spacer kits do we need to make this turret fit? | The Spacer Kit, # RP97FR is used for installing Reese Sidewinder 5th Wheel King Pin with Rotating Turret, # RP34FR in place of a Fabex 500 or 700 series pin box, a Lippert 0115, 1116,...
Solution On How You Can Install A WDS On Trailer With No Space On Trailer Frame
Ive got a Flagstaff 176ED that I tow with either my 91 Jeep Grand Wagoneer or my 98 Jeep Cherokee. Both of those vehicles sag quite badly at the rear when the trailer is hooked up. The Wagoneer sags badly enough that the dolly wheel will sometimes...
Can Reese Weight Distribution Lift Brackets # RP6637 Fit 2 inch Wide Trailer Frame
I have a RP54970. I left old lift brackets on trailer tongue frame. My new trailer frame is 2inch wide. Trailer weight is 5304lbs. Carry capacity is 1896lbs hitch weight 600lbs. Two questions. Will part # RP6637 fit 2inch trailer frame width...
Fifth Wheel Adapter or New Hitch Recommendation for 2020 Chevy Silverado 2500HD with OEM Pucks
Bought a 2020 Chevy Silverado 2500HD with puck system. Camper is a Puma 295BHSS with a Revolution pin box. Old hitch is a Reese Pro 15 K in the old rail setup. Looking for an adaptor to the puck system or a new hitch. What will work with a 2020...
Correct Reese Goose Box Air Ride Coupler Adapter for a 2020 Keystone Fuzion 373
Just purchased a 2020 Keystone Fuzion 373. I want to convert it to a goose box. need help to make sure I the right one and it will fit. Thank you, | The correct Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter for a 2020 Keystone...
Can Reese Goosebox Be Used With 2020 Chevrolet Silverado 2500 With 6-3/4 Bed?
I have the new 2020 chevy 2500 standard bed as they call it .. Been looking on line on the demco auto slide but I have the puck system and dont want to buy adapter for it and BandW are out of stock .. So to say is the reese box any good on the...
Recommended Weight Distribution System With 6 Inches of Drop
need a new set up with 6 inch or more and good sway control using an inverted coupler. | The Reese Steadi-Flex # RP66560 offers good sway control and weight capacities, but is a little limited on the amount of drop. We do not currently have...
Filter Your Search
Contact and Help