RV AC Unit Recommendation for Non-Ducted Application with Heat Pump
I I want to get some recommendations on what AC/heater you guys recommend for my rv. I need one that can match my unducted system. If you can please recommend at least two. Thank you | For a non-ducted application like yours there's really...
Troubleshooting Brakes Not Working on Prodigy P3 When Brake Pedal Applied
Have a 2004 jeep grand cherokee that I install the Curt 55369 and the 7way ETBC7. Hooked everything up per your install instructions, using a p3 brake controller. Everything works as it should with the brake controller with the exception of...
Roadmaster Explorer Tow Bar And Roadmaster Base Plate Compatibility
Purchased: Roadmaster Crossbar-Style Base Plate Kit - Removable Arms Item # RM-521423-4 for mounting on 2004 Jeep Liberty I have Roadmaster Explorer tow bar. The connections do not seem to fit. I have never done this before and need guidance. Pictures:...
Replacement Hitch Installation Hardware for Curt 12031 Hitch on 2004 Honda Odyssey
What size mounting bolts are for the Curt Trailer Hitch Receiver - # C12031 for a 2004 honda odyssey? | The Curt # C12031 uses M12 x 1.25" bolts. You can get an entire hardware kit for your Curt hitch by using the part # RHK and putting the...
Recommended Trailer Wiring Harness for 2004 Toyota Tundra
Will this universal connector fit a 2004 Toyota Tundra V8 4WD? | The Universal Wiring Harness for Hopkins Multi-Tow Vehicle-End Trailer Connectors - 4' Long # HM40985 will work but you would still need a converter because of how your truck is...
Why is Brake Controller With Low Voltage Not Activating Trailer Brakes
I have a drawtite series 5000 controller. As of now it will not activate my trailer brakes. I am only reading 9.5V at the brake terminal of the plug on my truck. I am reading 12.5V at the other terminals for the lights etc. I was wondering if...
Replacement Option For 130 Watt Inverter
Hello eTrailer, Previous customer here. The inverter in my 2004 Minnie 31C does not work so I am looking for a replacement, Can you help? The info on the back of the inverter is as follows Dimensions Unlimited Inc. Model DUI 12/130TL Input...
Width Of The Putco Rear Stainless Steel Fender Trim
Please advise the approximate “width” of these fender trim pieces, specifically the rear strips. Or how much area is covered by this trim when installed? Thanks, | At the widest point (center) the rear trim pieces of the Putco Stainless Steel...
Troubleshooting Titan BrakeRite Not Engaging Disc Brakes With Prodigy P3 Brake Controller
Im seeing a max output current of .4 amp, output voltage of 12.5 V, with manual override, according to trouble shooting display on controller. My Titan Brakerite EOH actuator runs, but not enough to engage disc brakes tandem boat trailer. Re-bled...
Trailer Wiring and 5-Way Adapter Recommendation for 2004 Ford Mustang
After going through the QandAs, I think Ive got my answer, but I want to make sure... Im setting up my 2004 Mustang to tow a Motorcycle cargo trailer from Time Out. The trailer has a five pin flat and Ive been given a five pin flat for the...
Does 12pt Socket - 3/4 Drive # ALL643216 Work to Install Hitch Ball on Fastway Weight Distribution
Will this socket work for the fastway 8,000 lbs hitch for installing the ball? | Yes, the 1-7/8" 12pt Socket - 3/4" Drive # EQ70-00-4800 is a thin walled socket that works with Fastway weight distribution systems like the # FA92-00-0800. |
Can "A" Pad Be Replaced for Yakima Q Tower Roof Rack on a 2004 Volkswagen Golf
Hi gang at etrailer i am looking for replacement roof pads for my yakima rack system. there the older Q tower pad A . the rack is on my 04 volkswagen golf. any help would be appreciated. | The "A" pad you're looking for to pair with the Q Tower...
Replacement Trailer Coupler Recommendation for an Atwood 87558
I am looking for a replacement for an Atwood 87558. I purchased a Demco DM72VR, but it does not fit. This is going on a camper and slides into a slot instead of over the frame. The dimensions need to fit into a 3.5in slot and the Demco is 3.75in...
Does Westin Nerf Bars for 2004 Lincoln Navigator Come with all Needed Install Hardware
I have a 2004 Lincoln Navigator with the automatic running boards that I need to replace. Once the old boards are removed is there any modification required to install your running boards? Is all the mounting hardware required included in your...
Replacement Hardware for a Draw-Tite Trailer Hitch
Looking for just the hardware kit for trailer hitch model number 75237. Could you send me a link to that? | We do have just the hardware available for the Draw-Tite Max-Frame Trailer Hitch Receiver # 75237. The correct hardware is going to be...
Will the SportRack Vista XL Cargo Box Fit the Factory Roof Rack on a 2004 Acura MDX
Can this be mounted on those? | If your 2004 Acura MDX factory crossbars are 4-inches wide or less AND if the crossbars are positioned 25-7/8", 27-7/8", or 29-7/8" on center then the SportRack cargo box # SR7018 will fit. It looks like the max...
Making Connections Under the Hood to Install a Brake Controller on a 2004 Chevy Silverado
Hi, The truck is factory wired. Inside the auxiliary fuse box under the hood there are 2 red wires with ring connectors. The ring connectors have different sized diameter holes in them that match the diameters of the posts, so its pretty...
Is Husky Center Line Weight Distribution System A Good Fit For 700-Lbs Tongue Weight
Tow v, 2004 Silverado 150. Factory tow package. Trailer 7 x 14-enclopsed cargo 7000 GVW expected TW 700LBS. I will weigh each item as I load and I have a TW scale. | When choosing a weight distribution system you want the total tongue weight...
Parts Needed to Install Rhino Rack Pioneer Platform on Vehicle with Roof Tracks
Hello! I am organizing the parts needed to modify a Rhino Rack platform installation on my SUV. I am using RR44102B platform and will use legs RRRLCP39. Is the RRRLCP39 available in a 6-pack as opposed to 4 in the kit? Do you see any issue such...
Measurements for Rack'Em Fitz-All Enclosed Trailer Ladder Rack
Hello, What is the height from the bottom of the rack feet rain gutter contact point to the bottom of the crossbar? Thanks! | The measurement you are looking for on the Rack'Em Fitz-All Enclosed Trailer Ladder Rack, # RA-28, is 15.5". |
Troubleshooting Trailer Brake Controller on 2004 Chevrolet Silverado 1500
I have the activator controller. Installed on 2004 chevy Silverado 1500. Used the oem wiring harness. Wired black to black, red to red, white to white and blue from controller to light blue on oem harness. Did not use brown from harness. Plugged...
Gooseneck Hitch and Air Helper Springs Recommendations for a 2004 Dodge Ram 2500
Will a 2299 ride rite airbag kit work with a 60661 curt gooseneck hitch ? 04 dodge ram 2500 . | I have a Curt gooseneck hitch that will work with the Firestone Ride-Rite Air Springs, # F2299, on your 2004 Dodge Ram 2500, but the Curt installation...
Replacement Canvas for Pull Out Bed on Travel Trailer
I need to find a replacement canvas for the pull out bed on a 2004 18TB TT Tahoe Transport. Can you help me or steer me in a direction to find one? thank you! | It sounds like you're looking for the Denver Mattress Perfect Fit RV Mattress Protector...
I am planning on buying this harness for my 2004 Nissan frontier XE. Will it active Hazard lights when needed and also Reverse lights? I am sure it active brake and turn signals. I am trying to install this harness in order for me to install...
Filter Your Search
Contact and Help