Result: surface mount reverse light

bare metal surfaces from future corrosion. The lights on jacks are usually high-efficiency LED types | Hi jack will not work fuse is good replaced the switch no power but the light works. ...

so you need to make sure it's attached to a clean metal surface (it should be) but also that the main | I have power to the jack. LED lights work. Switch makes an initial sound but then does nothing. Only been used once. Tried...

and the surface of the A-frame. A star washer will get a good bite into the trailer tongue and the mounting flange | Hi i installed the EJ-3520-BBX to replace the factory jack of the same type that wasn’t working....

configurations within our available range of LED lights, including surface-, flange- and flush-mount types. You | I have a steel 2005 run-of-the-mill because I cant recall the name of it at...

thing I would check is your ground. If there is a ground wire then remove it, sand down the surface | I have an Atwood electric heavy duty tongue jack. The jack is stuck in the up position. The jack rotates about 1/4 inch either...