Result: fitting

You may need to enlarge your cutout for it to fit if it's too small. The snap-on lid will make it easy to access your cables to hook up to the shore station and fits up to 50-amp power cords. | What size...

Keep in mind that these are custom-fit covers designed for specific vehicle applications, so there isn't a reliable way to confirm they'll fit the seats in your motorhome. | Looking to buy RV seat covers....

Will these seat covers fit. I couldn’t find measurements. | I have a 2017 Thor Windsport model 34 P. Will these seat covers fit. I couldn’t find measurements. | Hey Henry, thanks for the pics! The RV Designer GripFit+ Motorhome...

What size ball end does this strut fit? | What size ball end does this strut fit? | Hey Myrl, the RV Designers Gas Strut part # RD82RR that you referenced is designed to fit 10 mm ball ends. Where are you wanting to install...

That will give you a clear answer on what size lock will fit your compartment door. The RV Designer Ace Compartment Lock 5/8" part # RD87GR will fit doors up to 3/8" thick and the lock is 5/8" long. | Will...

Does this wiper fit the 2023 Forest River Georgetown Gt7 36K7? | Does this wiper fit the 2023 Forest River Georgetown Gt7 36K7? | Hey Rodger, welcome back! Yes, the RV Designer J-Hook RV Wiper Blade # RD32QR will fit your 2023...

This switch would be too wide to fit your current cutout of .975 wide x 1.65 tall. | Hello, I see this switch has what i would call spring tabs, so will it fit a cut out of .975 wide x 1.65inch tall? I am trying to find a...

I’ve tried the Lippert landing gear lift foot pad however it does not fit over the leg end. | Will a Lippert Components 5th Wheel RV Landing Gear Foot Pad LC314667 fit a 2016 Outdoors RV Glacier Peak 5th Wheel that has the rectangular...

The part # RD28MR that you referenced is 7/8 inch long and fits a diameter hole of 3/4 inch. | Where does one measure from in order to match our existing cam locks? Thanks | Hey Kendra, you would want to measure from the back...

DISTANCE OF THE STRAIGHT PART OF THE SHANK TO THE COTTER PIN HOLE? iT SAYS FITS 1.5 INCH RECEIVERS THEN IN THE DETAILS PART IT SAY DESIGNED TO FIT 2inch RECEIVERS. | WHAT SPAN DOES THIS PIN COVER? DISTANCE OF...

At this time, we only carry universal seat covers for your motorhome. The RV Designer GripFit+ Motorhome Seat Cover # RD27SR is designed to fit most Class A RV captain chairs. | Goodmorning etrailer! Goodmorning...

The T5079 RV Designer Entrance Door Lock item # RD68SR is designed specifically to replace a TriMark 060-1650 lock. It fits doors that are 1.39" to 1.70" thick and is designed to fit a standard cutout of 4.95" wide by 4.85" tall. |

Will this fit the ceiling light in my 2021 Forest River Rockwood Mini Lite? | Will this fit the ceiling light in my 2021 Forest River Rockwood Mini Lite? The light over the dinette has the little push button in the middle and...

If 2-1/2" of usable length is enough, the # RD72GR will usually be the cleaner fit. If your coupler body or latch area is wider, or you simply want the extra span, the # RD22GR is the better choice. | I’m replacing the coupler...

What is the diameter of the slider the male part that fits into the track?? | What is the diameter of the slider the male part that fits into the track?? | Hi Michael, The RV Designer Sew-In Carrier part # RD48QR has the following...

Are you checking the dimensions to make sure the outlet will fit a specific opening? | What is the depth of the RV designer outlets? | The RV Designer outlets like part # RD26FR are 4-1/2 inches long, 2-3/4 inches wide, and...

For the screen door slider, those are pretty standard. Most of them fit a 12" track. So you'll just need to confirm that, along with what color you need and we can set you up. | Hello. I bought a used 2018 Thor Freedom Traveler...

Will these plates fit on standard TT scissor jacks? | Will these plates fit on standard TT scissor jacks? | I do have an option for you but the Ultra-Fab Footplate for Landing Gear and Stabilizer Jacks part # UF17-940006 are...

They are sold individually and measure 5" wide x 4-1/2" tall x 1-1/2" thick and fit door cutouts measuring 3-1/4" tall x 4" wide. | What is the size of this door lock? Im looking for replacement locks for 2007 Fleetwood...

Hello, I am looking for some standard on/off rocker swtiches for my 2025 keystone cougar that will fit in the factory cutouts on the control panel. | Hello, I am looking for some standard on/off rocker swtiches for my 2025...

I have a Jayco Seneca 37RB which has 40 diameter tires. most of the chalks only fit up to 32 tires. Any suggestions? Thanks | I have seen the wheel chocks like the anderson and am looking for something similar. I have a Jayco...

We actually only have one jack that fits all of those requirements. That is the Round A-Frame Trailer Jack # TJA-5000S-B. | I need an A Frame bolt on side wind 5000lbs manual trailer tongue Jack. There are several choices,...

It has a frosted lens, warm white output, and a built-in push button, so it’s a nice fit when you want softer bathroom lighting with individual control at the fixture. | Will this work in a bathroom area in my camper, or is...

The RV Designer Safety Lock Pin # RD22GR has a 1/4" diameter pin and a 3-1/2" usable length, so it’s the better fit between these two RV Designer pins when the coupler latch area is wider. | My trailer coupler has a 1/4" hole...