Can a Tow Bar be Mounted at an Angle When Flat Towing a 2011 Chevrolet HHR
to be as level as possible. For your situation I would recommend using a tow bar that attaches to a ball mount | Coach higher than pull vehicle 2011 Chev HHR. Can tow bar be at an angle, if so how much. If...
How To Determine What Size Ball Mount Will Fit On 2006 Chevy HHR
which size an style fit Chevy HHR for ball mounts? | which size an style fit Chevy HHR for ball mounts? | Your 2006 Chevy HHR has a Class I 1-1/4 inches hitch receiver, so you would use the recommended ball...
Which Class I Ball Mount to Use with Draw-Tite Hitch # 24756 for 4-Inch Rise on 2008 Chevrolet HHR
Will this ball mount work on my 2008 HHR LT using Draw-Tite hitch part number 24756 and what | Will this ball mount work on my 2008 HHR LT using Draw-Tite hitch part number 24756 and what is the total rise to...
Ball Mount Recommendation to Clear the Back of a 2007 Chevy HHR
If you were to use ball mount # C45014 on your 2007 Chevy HHR it would be very tight so I do | It seams after careful measurement that using this unit #C45014 it will give me only 1inch or slightly less clearance...
Recommended Trailer Hitch and Ball Mount for a 2009 Chevy HHR
The trailer hitch I recommend is the Draw-Tite Class I # 24756 and Draw-Tite ball mount # 3594 | I own a 2009 Chevy HHR, I am looking for a hitch that will put the center of a 1 7/8inch ball at 13 1/2inch to...
Recommended Ball Mount and Other Towing Accessories for 2011 Chevy HHR
i need the recommended ball mount for 2011 Chevy HHr | i need the recommended ball mount for 2011 Chevy HHr | For your 2011 Chevy HHR, our friends at Draw-Tite recommend the 4 inch Rise Sportframe Drawbar, part...
Parts Needed to Tow a Trailer with a 2006 Chevy HHR
the following parts: Trailer hitch # C11447 Ball mount # C45520 2 Inch Ball # C40018 or 1-7/8 inch ball # C | Have a 06 HHR. Wanting it to tow a small side-by-side that weighs...
Which Curt Trailer Hitch Fits a 2010 Chevy HHR
with the correct ball mount, hitch pin, and clip. If you plan on doing some towing you can use 1-7/8 inch ball | Will It Fit a 2010 Chev HHR? | Curt Trailer Hitch, # 11430, is designed to fit...
Hitch and Trailer Recommendation for a 2011 Chevy HHR
chair off the ground unsupported. To complete your towing setup you would also want a ball mount | if I put trailer hitch on my 2011hhr if my car can handle a 500lbs handy cap scooter? | The only way you could...
Trailer Hitch Recommendation for a 2011 Chevy HHR
for trailer wiring, part # 3594 for a ball mount, # 19256 for a 1-7/8 inch hitch ball, and # 19258 for a 2 | Are Curt and Draw-tite the same company? If not, which is the preferred manufacturer? 2011...
Does the Rear Bumper have to be Trimmed to Install a Trailer Hitch on a 2011 Chevy HHR
with the proper ball mount, pin and clip. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258 | DO we need to cut the notch for the Draw-Tite on a 2011 HHR? | If you have a 2011...
Is There a Trailer Hitch for 2010 Chevrolet HHR With Heavy Tongue Weight Capacity
2010 Chevy HHR is to use a trailer, and for that you will need a hitch, wiring and ball mount | I need a hitch for my 2010 Chevy HHR with 500lb tongue weight to haul a mobility scooter. | The only trailer hitches...
Needing Receiver Hitch for 2008 Chevy HHR SS
the following: A ball mount Wiring harness with 4-pole trailer connector, part # 118407 2 inch trailer ball | I see you have a hitch for the HHR, my question is do you have one to fit the...
Trailer Hitch Recommendation for a 2011 Chevy HHR
that they are not the same. The Curt and Draw-tite are identical hitches and mount the same. What is the truth | 2011 Chevy HHR LT2. I was told Curt and Draw-tite are the same companies. I read on your site that they are...
How to Determine if a Vehicle has a Class I or Class II Trailer Hitch
50mph. It says you need a ball mount accessory to place the ball on the hitch and says its | Im looking at purchasing this stabilizer# 83660 for my Tear Drop camper...has a terrible sway over...
Can Roadmaster Dual Hitch Receiver Adapter Be Used for Cargo Carrier While Flat Towing
might consider using something like the Replacement Shank for Gen-Y Adjustable Ball Mount # 325-GH-305 | Hello etrailer, I have a 2017 Fleetwood Pace Arrow motorhome and my hitch weights are 10,000 lb towing...
Filter Your Search