What are the Dimensions of the Curt 2-Ball Mount for 2 Inch Receivers?
to the front end non-ball end of the hitch mount? Thanks | I’m interested in the Curt C45665. Can you tell me the distance from the center of the pin hole to the front end non-ball end of the hitch mount? Thanks...
Picking Out Ball Mount to Allow Trailer to Sit Level Towed by 2010 Honda CR-V
Sounds like you are looking for the correct rise/drop ball mount to allow your trailer to sit level | Hello, we have a 2010 Honda CRV used to tow a smaller Aliner pop up. With a 2” mount, I have to use a jack...
Trailer Hitch and Wiring for a 2015 Cadillac XTS VSport
that will include the VSport model. If you plan on doing some towing the proper ball mount for this hitch is # 36061 | I am considering purchasing this vehicle , but only if this hitch will fit. Im just concerned...
Is Fastway E2 1000 lb Trunnion Weight Distribution System Available Minus The Shank
rearward of the trailer ball. For the trunnion system, the brackets are mounted between 27-30 inches aft | I have a 2015 Ram 2500 that I will be towing a 2022 Winnebago Micro Minnie 2100BH travel trailer with....
Installation of Draw-Tite Class II # 36538 Receiver Hitch on 2014 Cadillac XTS
. If you will be towing with your XTS, I would recommend a ball mount like # C45503. You will also need | how is a draw tite hitch installed on a 2014 cadillac xts? is there any new holes that have to be...
Is Fascia Trimming Required to Install Curt Trailer Hitch 12115 on a 2013 Cadillac XTS
the hole. If you are planning on doing some towing the correct ball mount is # C45017 and use pin | C12115 I have a 2013 XTS... This is a leased vehicle. Cutting away the bumper fascia is NOT required,...
How Hard is it to Install a Trailer Hitch on a 2013 Cadillac XTS
. If you plan on doing some towing the recommended ball mount is # 36061 and it comes with a pin and clip | Need to know how much trouble to install hitch .I see no information for this installation. | The...
Trailer Light Wiring Kit for a 2014 Cadillac XTS
factory wiring. To complete your towing setup I recommend the Curt Ball Mount # C45017, Pin & Clip # F | What about wiring is there a plug-in set up or does it have to be grafted in. | The Curt Trailer Hitch...
Hitch to carry mobility scooter and carrier
will also need a ball mount # C45017 and 1-7/8-inch hitch ball # 19256 for a complete towing package. | Is the c12115 suitable for a 2018 Cadillac XTS, a 75# carrier and a 100# mobility scooter...
Filter Your Search
Contact and Help