GMC  x   >   Ram  x   >   !Coachmen  x   >   Dutton-Lainson  x   >  

What is the bolt center to center dimension? | The distance between the holes of the coupler # DL13897 is 3 inches. |

Im interested in the DL25215 to load a 6500lb max 25foot pilot house on a wood bunk trailer with poly slicker covers. Ive noticed the Dutton-Lainston makes a 4500lb DC model which replaces the strap with a steel cable. Would that winch be...

I have a trailer with the bed and tongue 25inch off the ground when level. Do you have anything that I can use for this? | The Dutton-Lainson Trailer Jack part # DL22210 that you referenced can extend 28-5/8 inches from the bracket down to the...

Would you know the mounting dimensions for this part DL14830 | Winches like the Dutton-Lainson # DL14830 you asked about have mounting holes that tend to resemble a Picasso painting so they can be hard to describe. Instead I made a diagram...

looking for a 6inch diameter swivel caster for my Forest River Geo Pro RV. Need the caster to be the ball bearing swivel type with 2inch jack rod receptacle. Is the DL22539 what Im looking for? | I do have options for you but ball bearings...

can you tell the weight of this cable set? How does it compare to the weight of comparable chains? We are a tiny travel trailer OEM and every pound counts for us. Thank you! | The Dutton-Lainson 40" Vinyl Coated Safety Cables with Clevis...

I have a 23 foot off road travel trailer with a jockey wheel. My tow vehicle is a 2019 Ram 1500 5.7 l hemi and since the max weight of the trailer is 6,600 lbs I need a weight distribution hitch with sway control according to the manufacture....

Is a shorter handle available for this unit? The handle on the one I am replacing is only 7 inches. | The handle length of the winch part # DL14825 that you referenced is 9-1/2 inches so for a shorter one you could go with the # DL70336 for...

I need to get a boat trailer jack with similar features as the DL67MR except that I only need 800-1000 lbs. The coupler height needs to be between 15" and 24 inches high. Do you have a recommendation for a USA manufactured with the above specs?...

I have a restored 1974 AMF Crestliner Muskgee , the trailer basically stinks, I am a Retired Army Disabled Vet, 62 with Parkinson. I cant self load my boat with current set up . can I replace with this setup.. Dutton-Lainson Boat Trailer Deluxe...