Universal-Fit Towing Mirror Options for a 2008 Ford Explorer
What towing mirror will work on my 2008 Eddie Bauer Ford Explorer? | We offer a Universal-Fit Clip-On Towing Mirror, part # 7070, will work on your 2008 Ford Explorer. This mirror will secure to your mirror using rubber straps, and will be secure...
Ladder Needed That is 105" Long
My ladder now is about 105 inches long, do have any that long for a George of 2000. | The longest ladder that we have is the 99-1/2" ladder from Stromberg Carlson. This comes in Silver # LA-401 as well as Black # LA-401BA and has a customizable...
How to Select the Proper Ball Mount for a 2008 Ford Explorer with 1-1/4 inch Factory Receiver Hitch
What drawbar do you recommend for a 2008 Ford Explorer with a 1 1/4 factory installed receiver? Because the receiver is welded directly into the cross member, rather than under it, the location of the pin hole in the receiver does not allow...
What Wires of 4-Way to 7-Way Adapter Needs to be Connected to Use Curt Echo Mobile
My RV has a 4 post to 7 post adapter the blue black and yellow are not connected to anything will the Curt echo Bluetooth brake controller still work for me ? | You'll need to connect the black wire of your 4-way to 7-way adapter to the positive...
Will the Coil SumoSprings CSS-1125R Fit a 4WD 2008 Ford Explorer?
Will these fit 4WD 2008 Explorer on the rear? | No, I am sorry Gordon they do not. The Coil SumoSprings item # CSS-1125R only fit the rear suspension on the 2WD 2008 Ford Explorers. I do not have an option or any alternative for the 4WD Explorers....
Where Is Factory Brake Controller Plug Located On 2010 Ford Explorer Sport Trac
Where do I find the wiring to connect my control unit to? I have a factory installed type III/IV towing package on my truck. Will it be located under the dash? How do I recognize it....special color or configuration? 2010 ford explorer...
Brake Controller Installation Instructions for a 2008 Ford Explorer Sport Trac with Factory 4-Way
My 08 ford sport trac has the factory tow package 4 blade. I need to add a 7 blade receiver to power my trailer brakes. Can you give me step by step instructions? Thanks. | Sure, I will be glad to help you with installation instructions for...
Does the Engine Need to Be On So Brakes Work Properly While Flat Towing 2010 Ford Explorer
Since the car has power brakes, does the motor have to be running when towing? | No, the vehicle motor will not need to be running while towing the vehicle in order for the brakes to work. When checking the owners manual for an Explorer, I...
What are the Dimensions of the CURT Trailer Hitch Mounted Accessory Step # C31001
What are the deminsions of this step | I spoke with my contact at CURT and he stated that the Step, # C31001, is 6-3/8 inches front to back and 10-3/4 inches wide. I have made a picture showing these dimensions for you. |
Replacement Mounting Hardware for Aries Grille Guard for 2008 Ford Explorer
Looking for hardware for Aries 3059 for my 2008 Explorer. Is it available and what is the cost? | For the Aries grille guard part # AA3059 the correct replacement mounting hardware kit is the part # AABRKT-3059. |
Does Air Line of Bulldog Winch Compressor # BDW41000 Use Standard Quick Connect Fitting
Are the connectors on the Bulldog Winch BDW41000 STANDARD and can I use an Extension hose to reach the trailer tires? | The air hose of the Bulldog Winch Compressor # BDW41000 has a standard quick-connect fitting on the end of it so if you had...
2 inch Hitch Recommendation for a 2008 Ford Explorer for Use with Drop Ball Mount
Vehicle = 2008 Ford Explorer, Eddie Bauer Edition, with 1-1/4inch Class II receiver factory installed its welded in. The vehicle is stock - it has not been raised or otherwise modified in any way except for a repair I did on a visor! Trailer...
Hopkins Tailgate Lift Assist Compatibility with 2013 Dodge Ram
I just want to double check the easy lift will work on a 2013 Dodge Ram 1500 crew cab Laramie with the backup camera in the tailgate handle and power lock? Thanks | We do have a tailgate assist options for your 2013 Dodge Ram 1500 Laramie, however,...
Does the Hollywood Racks Sport Rider SE Tilt Downward for Easy Loading
We are considering the Hollywood Sport Rider SE for transporting a RadWagon electric cargo bike. Because my wife has trouble lifting heavy weights is it possible to tilt this unit down to reduce the height for loading and then tilt and lock...
Availability of 2-Inch Ball Mount with 6-Inches of Drop and 7500-lb Capacity
I need a ball mount, six inch , at least 700lbs tongue weight, at least 7500lbs towing weight, 2inch ball. Would prefer a ball mount that has the ball pre-torqued onto the ball mount if at all possible. Can you make some recommendations for...
Front Mount Receiver for 2008 Ford Explorer
I need a FRONT Class 3 hitch, 2 receiver, for 2008 Ford Explorer. Please advise. THanks | We do indeed offer a 2 inch front mount receiver for a 2008 Ford Explorer, it is part # 31545. The hitch has a 9000 lb line pull capacity and a 500 lb...
Could Hitch from 2000 Ford Explorer Fit 2008 Ford Explorer
I have a hitch off a 2000 ford expedition and was wondering if I can bolt that up to a 2008 ford explorer? | Those vehicles are very different so a new hitch fit would be required like the Curt part # 13112 for the 2008 Ford Explorer. |
Brake Controller and Wiring Recommendation for a 2008 Ford Explorer Towing Trailer with 6-Way
I have a 2008 Ford Explorer that has a 1 1/4inch towing receiver and a flat-4 connector factory installed. I have two trailers, a utility trailer that uses a flat-4 connector, and a tent trailer with brakes that has a 6-pin connector. Is this...
Brake Controller Installation on a 2008 Ford Explorer with 4-Pole Trailer Connector
I have a 2008 Ford Explorer and need a 7 pin connector and brake controller. Does a new brake controller simply plug in somewhere on the explorer? Is there an adapter to convert the 4 pin connector to the 7 pin and does this eliminate the need...
Is Trimming Required for Installation of the # 31545 Front Mount Hitch on a 2010 Ford Explorer XLT
With #31545 Curt front mount trailer hitch receiver will I have to trim any bumper parts on my 2010 explorer xlt ? Thanks | There is no drilling, cutting or modifying of any of the parts on your 2010 Ford Explorer XLT for installation of the...
How to Pick Out Replacement Hubs for a Utility Trailer
The hub bearings on my utility trailer were replaced about 6-7 years ago. Time wise and cost figured in, it would be easier for me to replace the whole hub assembly. This would already come with new bearings installed and greased. How would...
Replacement Drop Leg Needed for a RAM 2000 Series A-Frame Jack
I just purchased a camper, and the dealer did not have a footplate that would fit because of the indent on the stand itself. Can you tell me if it will fit this particular jack? It seems to have the same indent, Im just not sure if it will...
Parts Needed to Add a 7-Way Trailer Connector and Brake Controller to a 2008 Ford Explorer
I have a 2008 Ford Explorer with an OEM 4 way tow package. I had previously installed a Curt 2 inch receiver for use with my tent trailer. The tent trailer has been recently replaced by an 18 foot dual axle travel trailer and I now need to...
How to Add a 7-Way Trailer Connector to a 2008 Ford Explorer
how can wire my 2008 frod explorer for 7 way plug cant use the plug for factory wiring | When you say that you can't use the plug for factory wiring on your 2008 Ford Explorer does that mean you have a factory 4-Way and just need to add a 7-Way...
Filter Your Search
Contact and Help