Bearing Kit that Works for 2007-2010 TADA Dutchmen for the Al-KO Axle
This is the bearing kit others have used for the 2007-2010 TADA Dutchmen for the Al-KO Axle. The specs are as follows: Trailer Bearing Kit Consists of: 1 - A17 Bearing Set L68149/L68111 1 - A4 Bearing Set L44649/L44610 1 - 442251 Seal 1 -...
Availability of a Trailer Axle With at Least 5,000LB Capacity and 86-1/2" Hub Face To Hub Face
I am looking to replace these axles with at least 5000 capacity ones. Have a hard time finding a replacement that will match the distance hubs and springs. Can you help. Im ok with going from a 5 lug to a 6 lug. | We do have the Dexter 5,200lb...
Size of Bolt Used to Install Draw-Tite Trailer Hitch Receiver on a 1998 Lincoln Mark VIII
What size are the bolts that hold the hitch on,,, at the point where the exhaust re-attaches? The Curt hitch will not fit. It has 1/2 inch bolts at this point. The bracket is only 1/2” wide. I have had two here, had to send them back. Do...
Determining The Correct Baggage Slam Latch For A 2017 Dutchmen Kodiak Ultimate 288BHSL
What Baggage locking slam latch would I need for a 2017 Dutchmen Kodiak Ultimate 288BHSL? Im not finding the exact match anywhere? This would be for the front storage doors. Thanks | Manufacturers do not list the part numbers they use so we...
Grease Seals for 2018 Dutchmen Kodiak Ultra Light Travel Trailer
What is the best way for me to identify what type of seals I need for my 2018 Duchman Kodiak Ultra Lite Travel Trailer. I know my axels are rated for 3500lbs. Im planning to repack the bearings. Thank you | The Grease Seals # RG06-050 are the...
Auto Level Operation Of The Lippert Electric Ground Control TT Automatic Leveling System
I was wondering if it is normal when using this system and it completes its auto leveling process, my power tongue jack retracts and stays this way I understand this system supports the trailer but it seems odd the tongue jack essentially is...
Replacement Hub and Drum Assembly for Lippert 4.4K 136214 Hub and Drum
Hello, Part number off the Lippert hub is: 136214, 10 brakes, 6 bolt on 5.5, bearings L44649, L68149. Looking for a bearing installed pre greased to carry as a spare. Redline number that worked to get me out of a bind: HD84656BX | For your application...
Can 3,500 lb Hub and Drum Be Used for 4,400 lb Lippert Axle
Jon G got me the replacement part number for my Lippert brake hub but opens other questions. My Dutchman Kodiak Ultimate travel trailer has what Lippert calls 4400 LB axles with 84 spindles and hubs which are rated at 1750 lbs. or 3500 lbs....
What is the Distance between the Pinhole and the Outside Wheel Hoop of the Traveler XC2 # S64663?
Trying to determine the distance between the hole on the hitch receiver to the farthest distance from same. | I confirmed with my tech at Swagman that the distance between the center of the pinhole to the outside edge of the furthest wheel hoop...
Filter Your Search
Contact and Help