Do I Need to Lower Exhaust on 1999 Volkswagen Jetta TDI in Order to Install Curt Hitch 11070
I was just curious if i am going to need to lower the exhaust on my 1999 jetta tdi | In order to install Curt Hitch, part # 11070, you will need to undo the exhaust, probably just at the rearmost rubber hanger. This will provide some room to...
Winch and Custom Winch Mount for a 2015 Kawasaki Mule 4010
I'm looking for a winch and mount for a 2015 Kawasaki Mule 4010. Thank you. | For your 2015 Kawasaki Mule 4010 I recommend Superwinch # SW1130220 rated for 3,000 pounds. And for a custom fit mount that will fit the Mule and the winch you can...
Winch Mount for Superwinch Terra 45 on Kawasaki Mule 4010 ATV
Hello...Have the task of mounting my new Terra45 to my 2014 Kawasaki Mule 4010 4wd. Is there a mount made? If so model number and if available ? Thanks... | For your 2014 Kawasaki Mule 4010 we have the Bulldog Winch Mount # BDW15106. This is...
Recommend Recovery Winch for a Kawasaki 3010 Mule Trans 4x4 Diesel
I have a 3010 4 x 4 Kawasaki Mule. My need is the capacity to pull it up a 40 degree muddy creek bank. Understand the Mule weighs about 1400 lbs. Should I use a snatch block ? I would like to mount it permanently. Thanks, | I have the perfect...
Will Quick-Fit UTV Bench Seat Covers # CA18033 Fit 2003 Kawasaki Mule 550 KAF300C
I have a mule 550 kaf300c. Will this fit my seats? | I spoke with my contact at Classic Accessories and the Quick-Fit UTV Bench Seat Cover, # CA18033, is made to fit seats that measure 41-1/4 inches long by 17 inches wide and backs measuring...
Seat Cover Recommendation for a 2007 Kawasaki 4010 Mule
will the ca18033 fit the 2007 kawasaki 4010 mule seats? | Yes, the Classic Accessories Quick-Fit UTV Bench Seat Cover # CA18033 that you referenced will fit your 2007 Kawasaki 4010 Mule. |
Lippert SolidSteps to Fit a 30 Inch Doorway
Do you have the Solidstep for a 30inch doorway? If so, how much? Thanks | We sure do. How many steps are you looking for? For a 30 inch wide door use part # LC791575 for a quad step if your threshold height is between 35 and 44 inches, part...
Custom Winch Mounting Bracket for a 2018 Kawasaki Mule 410
Hello, could you recommend a mounting kit for my Mule 4010 2018 for a Warn advance 3000? thanks | We currently have one winch mounting brackets that is designed for your 2018 Kawasaki Mule 410 which is the Bulldog Winch Custom-Fit Steel ATV...
Which Winch Mount Fits 2015 Kawasaki Mule Pro-FXT
WILL THE MOUNTING BRACKET CODE # 2202882, FIT A KASASAKI MULE PRO FXT 2015 UTV? | We do have a winch mount that is confirmed as a fit for your 2015 Kawasaki Mule Pro-FXT but it is not the # 2202882. Instead you would need the # BDW15184 which...
Compatibility of the SuperWinch LT3000 Winch with the Bulldog Mounting Bracket # BDW15184
Will this mounting bracket # BDW15184 fit the Superwinch LT 3000 ATV winch? Will both the mounting bracket and hitch fit a 2015 Kawasaki Mule Pro-FXT? | Yes, the Superwinch LT3000ATV Winch, # SW1130220, will fit the Bulldog Winch Custom-Fit...
Center to Center Distance Between Clips on K-Source Panoramic Aspheric Rearview Mirror # KSRM1300
What is the measurement center to center between the clips? | I went out to the warehouse to measure K-Source Panoramic Aspheric Rearview Mirror # KSRM1300 for you. The center to center distance between the clips is 3-1/4 inches. |
Winch Mounting Plate for Kawasaki 610 4x4 and Chicago Electric 3000# Winch
I understand that the mount fits the Kawasaki 610. I need info on its ability to mount the Chicago Harbor Freight Model 95912. The mounting plate that comes with the Winch is 7.086 Long x 4.881Wide X 2.165 High. The screw holes on the mounting...
Installation Of Brake Controller On 2016 Mercedes-Benz Sprinter With Tow Package
I have a 2016 MB Sprinter, I ordered it with the hitch package. I called MB of Tampa and they said that the harness for the brake controller is included with the hitch package. I watched your video for installing the controller on a 2013 Sprinter...
Filter Your Search
Contact and Help