Where Does the White Wire of the Curt Wiring Harness # C56039 Go on a 2011 Mitsubishi Endeavor
no directions to do what with white wire lug connector on factory plug side | The white wire you referenced actually needs to get run to a clean metal surface on the body of your 2011 Mitsubishi Endeavor with the included self tapping bolt through...
Wiring Harness for a 2007 Mitsubishi Endeavor
I have a 2007 Mitsubishi Endeavor, and I need a wireing harness, what is the difference between a non-powered system and powered system. Will this one work on my car? | Since 07 Endeavors did not come with a tow package, you will need to hardwire...
Right Side Trailer Lights Not Working After Installing a Wiring Harness on 2011 Mitsubishi Endeavor
ordered 2011 Mitsubishi wiring harness from e-trailer for my suv. . also ordered trailer hitch which is working great, installation was a breeze for both. only one side left of my trailer lights are working. would poor grounding cause...
Trailer Wiring Harness for 2004 Mitsubishi Endeavor
Im thinking about getting T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - Mitsubishi Endeavor, 2004 My Endeavor does not have the trailer package. I was reading on other sites that their cable would not work because I did not...
What Size are the Bolts for Curt Trailer Hitch, # 13113 for a 2006 Mitsubishi Endeavor
what size are the mounting blots for the mitsubishi endeavour? | The bolt sizes for the Curt Trailer Hitch, # 13113, can be found in the instructions. I have included a link to the installation instructions and a video install below. |
Hitch and Wiring Install Instructions for a 2011 Mitsubishi Endeavor
do you have a video on connecting the trailer wiring kit on 2011 Mitsubishi Endeavor. | The recommended trailer wiring harness for your 2011 Mitsubishi Endeavor is the Curt Harness part # C56039. We have not had the chance to install this harness...
Parts Needed and Instructions for Installing a Brake Controller on a 2004 Mitsubishi Endeavor
Trying to install electric brakes on my endeavor. It has the standard four prong plug but I need to change it to a system that includes electric brakes. What do I need to buy? | You will need a brake controller and a brake controller installation...
Electric Brake install 2000 Coleman Sedona
I've confirmed my bearings are 44643 for inner and outer. Ive also got the 5 on 4-1/2. So I would like a list of parts for the Electric Brakes for the 2000lb Dexter Axle. Ill need the Hub/Drum. Could you include Wiring in this as well for a...
Electric Brake install 2000 Coleman Sedona
I have a 2000 Coleman Sedona popup camper. Ive verified it has the Dexter 2000 lb axle. Ive also verified it has the backing plate with 4 holes on each side behind the tires so it will accept electric brakes. Currently it doesnt have any brakes...
Can Roof Rack Cargo Bag, # HE3021 Be Installed Directly on the Roof of a 2004 Mitsubishi Endeavor
Question about this cargo bag item #HE3021: Does the bag come in different optional colors? Since it has a rubber bottom, can it be placed directly on the SUV roof between the the 2 roof rack bars without causing damages to the car roof?...
Hitch Recommendation for a 2004 Mitsubishi Endeavor
So I want to buy the hitch for a 04 endeavor and Im curious about your return policy. Also since I intend to install the unit myself what options do you have as far as trouble shooting install problems or something else. | The Draw Tite Hitch...
What is the Torque Rating When Installing 7 Inch Brake Assembly to Brake Mounting Flange
I wanted to know what I torque the nuts to when attaching the 23-48 part to the square flange on my trailer? In the video I dont see them using a torque wrench but Im sure there is a best practice for this when tightening them up. Thanks. |...
Installing Hopkins Wireless Backup Camera HM50002 in 2005 Mitsubishi Endeavor
I have an 2005 mitsubishi endovor can I install this unit | The Hopkins Smart Hitch Backup Camera # HM50002 will plug in on any vehicle that has a 7-way trailer socket with a round U.S. Car plug-in connector at the rear. The photo I linked...
Is the Yakima SkyBox Rooftop Cargo Box # Y07336 Completely Waterproof
Is this box waterproof? | In the strictest sense of the word, "waterproof" would mean water absolutely cannot enter a product. In reality there will always be some circumstance where some moisture could enter a product like a cargo box, even...
Will a Trunk Mount Bike Rack Fit on a 2008 Mitsubishi Endeavor and Not Scratch It
Wil this bike rack work on my 2008 mitsubishi endeavor and not scratch it? | The Thule Passage trunk mount bike rack # TH910XT is a fit for the 2008 Mitsubishi Endeavor. However, it is possible that this or any trunk mount bike rack can cause...
Does Malone Roof Rack MPG216 Fit 2005 Mitsubishi Endeavor
Your add claims that Air Flow 215 fits the 2005 Mitsubishi Endeavor. I have tried cross bars said to fit the slot, and have looked at dimensions of others that are clamp fits. The cross bars in-slot mount fixture was 1/2 inch and my slot was...
Are There RV Storage Covers That Are Compatible With The Slide Out Being Fully Extended
can you purchase a cover for travel trailer 30 feet long with super slider that extends out 3 feet? | RV storage covers aren't designed to be used when slide outs are open so there isn't going to be available that will allow you to keep your...
Troubleshooting Brake Light Issue with Modulite Wiring # C59496 on a Mitsubishi Endeavour
I installed the C59496 wire harness kit for my 2010 Mitsubishi Endeavour. I then connected my camper trailer. The running lights and blinker work. However, the brake lights are always on...on the trailer. I disconnected reconnected everything...
Socket Size for Installing Curt Trailer Hitch 13113 in 2008 Mitsubishi Endeavor
What size torque wrench is needed for installation | The Curt Trailer Hitch Receiver # 13113 that fits your 2008 Mitsubishi Endeavor will require you to use a torque wrench with an 18mm socket. You will need to torque all M10 fasteners to 48...
Installing a Brake Controller in a 2002 Holiday Rambler Endeavor
I have a 2002 Holiday Endeavor. I am wondering what wiring harness I would need to install a Brake Controller, and where would I find the plug to plug into on my motorhome. | A brake controller is going to need to be hardwired into your 2002...
2006 Mitsubishi Endeavor Trailer Hitch Compatibility with Other Model Years
Will a 2008 Mitsubishi endeavor receiver hitch fit on a 2006 ? | If you have the Curt # 13113 on your 2008 Mitsubishi Endeavor, it will be compatible with a 2006 model. This hitch will fit 2006-2011 model years of that vehicle. I've attached...
Can the Pro Series Solo Steel Cargo Carrier be Used on a 2010 Mitsubishi Endeavor with 2 Inch Hitch
Although this item is rated for 400 lbs, can I still use this product with my Class 2, 2 inch hitch on my Mitsubishi Endeavor as long as I keep my load under the 350 rated tongue weight? | As long as you keep the total weight of the carrier...
Parts Needed to Add 7-Way to 2004 Mitsubishi Endeavor With 4-Way
Hello, I have a 2004 Mitsubishi Endeavor, and im looing to haul a 2009 Rpod 174. I need to upgrade my current 4 way wiring hook up ro a 7 way hook up that can withstand the amount of voltage needed for the brake light system of the Rpod. Could...
Bolts Provided with Hitch Will Not Fit in Nuts Welded Into Vehicle Frame
Bolts seem to not fit.. Seems to be too big for the holes in my vehicle. Dont know if wrong size bolts were sent or what bt my question is what size bolts are required for a 2005 Mitsubishi Endeavor trailer hitch? | Your Curt # 13569 Class III...
Filter Your Search
Contact and Help