Furrion 50 Amp Power Inlet Replacement
The clip on my F521NSBS snapped off is there a replacement cap for this as there are screws and looks like you would not have to replace the whole plug? | The Furrion 50 Amp RV Power Inlet part # F52INSBS offers a very straight forward complete...
Replacement Winch for 2008 Arctic Cat 400 with Factory Mounting Plate
Im seeking a replacement for a broken Warn 2.5 CI winch that was originally installed on my 2008 Arctic Cat 400. The original winch was built by Warn for Arctic Cat according to a decal. Can you recommend a replacement winch kit and let me know...
Troubleshooting Trailer Running Lights Not Functioning
The running lights on our trailer are not working. All the other lights are working properly. What should we explore as possible causes? Thank you. | The most likely causes to the issue you have are dirty trailer wiring connector pins which...
Stainless Steel T-Strap Hinge for Side and Rear Trailer Doors
Are these hinges stainless steel? | Polar T-Strap Hinge for Side and Rear Trailer Doors # PLR3416 is galvanized (zinc-plated) steel but not stainless steel. The zinc coating helps resist corrosion. For a similar hinge that is stainless steel...
Will Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K Fit Lippert Axle
Will this fit a lippert axle | Yes, the Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K that you referenced will fit a 3,500 lb Lippert trailer axle. |
Will the Stainless Steel Top with Glass Cover for Furrion Fit a FGHWCLDA-BL Furrion Cook Top
I have a 2021 Open Range 180BH with Furrion Range Cooktop #FGHWCLDA-BL. Will this replacement part fit? | I contacted the manufacturer and they confirmed that the Replacement Stainless Steel Top with Glass Cover for Furrion # C-FSRE21SA-SS-003...
Does Replacement Front Panel Module for Furrion 2-in-1 Range Oven Come with Instructions
Does this come with installation instructions? According to the video this is exactly what we need to fix our stove but didn’t know if this can be owner installed or needs to be done by a shop. Thanks! | The Replacement Front Panel Module for...
Atwood Air Command Rooftop RV AC Unit Thermostat Controls
I just bought your atwood air cammand 15k and wanted to know if you can adjust the temp from 2 to 1 degrees difference before the air turns back on. I was able to program this on my older dometic ac. | The Atwood Air Command Rooftop RV Air...
Winch Mount Recommendation for Superwinch on 2006 Arctic Cat 400
2006 Artic Cat 400 work quad. Any information on installing winch and location of relay on this quad. It looks like it has a factory winch plate, can I use it. | The winch plate you need for your 2006 Arctic Cat 400 is the Bulldog Winch Custom-Fit...
Recommended E-Bike Bike Rack For An 2018 Highland Ridge Open Range Ultra Lite Travel Trailer
We are looking to purchase a bike carry for our 2018 open range ultra lite travel trailer that attaches to a hitch we will have installed,2 inch square. E bikes are in our future in the next couple of years. What would you guys suggest. | Since...
Trailer Hitch Weight Capacity and Recommended Wiring for a 2002 Mitsubishi Diamante
How much weight can the trailer hitch for the 2002 mitsubishi diamante hold? This is the hitch that attaches on the drivers side and also behind the bumber slightly right of center. Im looking to pull a 350 lb trailer. | The DaLan Class I Trailer...
Trailer Hitch and Wiring for a 1995 Mitsubishi Diamante Wagon
WILL THIS WORK ON THE 1995 MITSUBISHI DIAMANTE WAGON? LOOKING TO PULL A LIGHTWEIGHT ALUM. CANOE TRAILER BY TRALEX IF NOT, CAN YOU MAKE ME ONE THAT WILL?? MANY THANKS | We do have a trailer hitch that fits the 1995 Mitsubishi Diamante Wagon...
Can Slide Topper Fit Next to RV Patio Awning
I have an Open Range 275 RLS Trailer. The kitchen slide has a patio awning attached to the slide. Question is, can an slide awning be installed in addition to the patio awning? | Yes, it's pretty common for slide toppers to fit right next to...
Is There Drilling Required to Install a CURT Trailer Hitch # C11244 on a 2001 Mitsubishi Diamente
On this product, it states no welding. Is drilling required? If so how much? And where. My car is a Mitsubishi- diamante- 2001 Sedan | Yes, there will be drilling to install this CURT Trailer Hitch Receiver with Drawbar # C11244. You will need...
Equal-i-Zer Weight Distribution System Recommendation for 11.4k Trailer and Lifted Truck
I have a 4x4 2500 dodge ram with a 2inch lift. Im thinking that the 3inch adjustment on the shank may not be enough. Do you have a shank with more adjustment, maybe up to 5 or 6 inches? I need to purchase a 14,000 distribution hitch. The...
Which Replacement Hub Replaces BD2-545-17
Do you sell just the drum? Part BD2-545-17 | Hey Rob, The BD2-545-17 has been phased out, so you would need to buy the entire hub with new bearings # AKHD-545-35-EZ-K. The reason for this is you should not be using used bearings in new races...
How Does the Lippert Tailgate Storage System Install On a Bumper
How does the carrier hook mount to this? There is no holes for carrier to pivot on or lock in place. There should be some type of bracket for the carrier to mount to as on the end of LC432336. Also the Lippert Tailgate Storage System Mounting...
Does Bulldog Winch Mounting Plate Fit 2008 Arctic Cat 400 Without Drilling Holes
Will the Bulldog bdw15002 and mounting plate bdw15108 fit on my 2008 arctic cat 400 without drilling any new holes? Thanks. | Yes, so long as your 2008 Arctic Cat 400 is one of the following models, the winch mount will fit without drilling...
Filter Your Search
Contact and Help