Why is a Battery Connection Required for Trailer Wiring Harnesses on a 2009 Chrysler Aspen
what is the need for the battery wire on the wire converter for the 09 aspen without 7 pin connector? Other basic converters dont have it. | Powered trailer wiring harnesses like # 118390 have a direct connection to the battery for 2 reasons....
Size of Air Lines of Air Lift Load Controller Compressor System AL25856
What size are the push to connect air lines? | The air lines of the Air Lift Load Controller Compressor System for Air Helper Springs # AL25856 are 1/4 inch. It is highly recommended you use the Air Lift Air Hose Cutter # AL10530 for the air...
Recommended Trailer Hitch for a 2001 Honda S2000 to Tow a Motorcycle or Jetski
I am looking for a trailer hitch for a 2001 Honda s2000 to tow a motorcycle or jetski on trailer. What do you recommend for this vehicle that is easy to install prefer no drilling or welding and that is the most hidden, so as to not ruin the...
What is the Best Trailer Brake Controller for a 2007 Chrysler Aspen
i have a 2007 chrylser apen 4wd. i will be towing a 1500 pound trailer with 1500 pound load-total of 3000 pounds. should i buy tekinsha prodidgy, P3, or Valley odyssesy | I would recommend the Tekonsha Prodigy P2, # 90885. It is easy to setup...
Locating Reverse Circuit for a Peak Wireless Backup Camera on a 2007 Chrysler Aspen
which wire is the hotwire for the backup light on a 2007 chrysler aspen | The only way to be sure which wire is the reverse light circuit is to test the wires with a circuit tester like part # 3808. Pull the tail light of, and have someone...
Recommended Trunk Mount Bike Rack and Security Options for a 2005 Honda S2000
my vehicle is a 2005 Honda S2000 i would like to get a bike rack one is o.k., 2 bikes more realistic if there is one with a security feature, so much the better. what is the best way for me to go this is my baby car,so nothing that will...
Fit of Hitch Covers and Ball Covers on 2-Inch Hitch on 2007 Chrysler Aspen
we have a 1inch and seven-eights ball. will a 2 inch hitch cover fit | If you want a cover for your actual hitch ball itself you can use # 42250 or one of the others shown on the included link. In the case of your 2007 Chrysler Aspen the only...
7-Way Adapter Wire Connection Pin Locations on 2009 Chrysler Aspen
I have a 2009 Chrysler Aspen that has both the straight 4 pin trailer connector and the 7 pin connector with the blade connections. The person I bought it from wired it to the 4 pin connector which worked fine but I went ahead and changed it...
Mounting Tab Width Range for Blue Ox Acclaim Tow Bar # BX4330
Your info states base plate needs to be at least 23inch spread apart. What is the furthest distance that this bar can be spread apart? | The Blue Ox Acclaim Tow Bar # BX4330 that you referenced can be used with base plate kits that are between...
Can 4,000 lb Floor Jack with Stands # PTW1605 Be Used When Storing Trailer for Jack Stands
To preserve the tires am I correct that I will need 4 stands during long term storage? | The trailer jack would hold the front of the trailer and then the two stands of the 4,000 lb Floor Jack with Stands # PTW1605 would hold the other end of...
Roof Rack and Folding Kayak Carrier Recommendation for 2008 Chrysler Aspen
Looking for a replacement 2 kayak roof system including cross bars for our Chrysler Aspen. We currently have a 4 yr old generic possibly TMS? roof systemfixed J-style. A couple of the J-rack have bent and the cross bars locking mechanism is...
Will Ultra-Fab Motor Home Trailer Hitch # UF35-946401 Fit a 2008 Chrysler Aspen
will this hitch will fit a chrysler aspen 2008 bumper | The Ultra-Fab Motor Home 2-Inch Trailer Hitch, part # UF35-946401, is intended for installation on the rear of motor homes that have an exposed 4-inch bumper. Installation requires that...
Will Roadmaster Rear Anti-Sway Bar # RM-1129-126 Fit a 2007 Chrysler Aspen
Will this bar also fit my Chrysler Aspen, which is basically the same as the Durango? | I spoke with my contact at Roadmaster and he said that the Roadmaster Rear Anti-Sway Bar, part # RM-1129-126, that fits the 2007 Dodge Durango will also...
High-Rated Transmission Cooler Recommendation for a 2007 Chrysler Aspen
I just bought this 2007 Aspen 5.7 Hemi and a Trailer .The Trailer weighs apr.4500 lbs loaded when we haul it the temp rises to 3/4 mark on gage after about 30 miles with the Tow/Haul on I have Trans cooler 16 rows mounted in front of Radiator...
How to Install a 7-Way on a 2007 Chrysler Aspen
I bought a hitch for 2007 Chrysler Aspen along with a Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End part HM40975 and realized it didnt have factory OEM plug in. I was thinking of ordering the T-One Vehicle...
Universal Fit Towing Mirror for a 2008 Chrysler Aspen
will these work on a Chrysler aspen 2008? | As long as the mirrors on your 2008 Chrysler Aspen have a lip or gap between the glass and the mirror housing then you can install the K-Source mirror # KS3891. I have included a link to a video...
Towing Mirror Recommendations for a 2007 Chrysler Aspen
do you have custom towing mirrors for a 2007 Chrysler Aspen? | I have a solution for towing mirrors for your 2007 Chrysler Aspen, but we do not carry any custom towing mirrors that will fit your vehicle. Instead, I would recommend a universal...
Which Hitch, Trailer Wiring and Ball Mount are Recommended for a 2008 Chrysler Aspen
what trailer hitch, trailor wiring, ball mount is recommened for a 2008 chrysler aspen?? | I think the best and easiest to install hitch would be part # 13296 from Curt. It has a 600 pound tongue weight and 6,000 pound gross towing weight capacity. The...
Does the Kenda Tire and Wheel # AM30780 Come Inflated to the Proper PSI
Do these tires and wheels come ready to install on my trailer? Are they already filled to the proper psi? | The Kenda Tires and Wheels # AM30780 will have some air in it, but you will need to check the air pressure once you mount the tire and...
Where Does a Trailer Hitch Install on a 2003 Honda S2000
I am hoping to verify that this hitch is mounted to the frame. | The Curt trailer hitch # C11212 attaches to the frame of the 2003 Honda S2000 in 2 places and to the trunk pan in 4 places. I have linked the installation instructions that show...
Wiring Differences Between a 2008 and 2007 Chrysler Aspen for T-One Harness Part # 118390
Video on website utilizes a 2008 Chrysler Aspen in demonstration. My question is are there any differences in install on 2007 Aspen? | There should not be any difference in the wiring process between a 2007 and 2008 Chrysler Aspen. They use...
Recommended Trailer Hitch and Bike Rack for a 2004 Honda S2000 Convertible
Hi, Im interested in getting a trailer hitch and 2-mtnbike rack for my 2004 honda s2000. would you recommend the curt hitch and which model? similarly, which of the bike racks do you recommend? the swagman platform racks look interesting, which...
Dexter E-Z Flex Rubber Suspension System # K71-653-00 Fitment on 2005 Outback 28RSDS Trailer
Hi, I own a 2005 Outback 28RSDS which has, I believe, AlKO axles. Id like to replace the shackle plates and bolts and equalizer with this Dexter kit. Will it work properly with this system? If so, I assume the nylon bushings in the spring...
Trailer Hitch and Wiring for a 2000 Honda S2000
Do you have an installation manual for the hitch its a 2000 honda s2000 | Yes, installation instructions for Curt trailer hitch # C11212 (no longer available) are linked on its product page, right hand side of the page. I have also included...
Filter Your Search
Contact and Help