RST x > Rocker Switch x > Vortex Fifth Wheel x >
How To Determine Fit of the Never Fail Triple Axle Suspension Upgrade Hardware Kit
Fitmit for a 04 Thor vortex 385 triple axel toyhauler | In order to determine if the Never Fail Triple Axle Suspension Upgrade Hardware Kit part # LC281288 will work on your 2004 Thor Vortex 385 5th Wheel Trailer you will need to confirm a few...
How Much Clearance Above Bolt Hole of MORryde CRE3000 MR87ZR is Required
What are dimensions of the CRE3000 for hanger clearance? I have an internal block inside of mine. | Hey Greg, the MORryde CRE3000 Equalizer part # MR87ZR will work for you and will clear the block you have in your hanger. The distance above...
Looking for Hitch Solution for 2004 Monaco Dynasty Coach
Morning Have a customer looking for a trailer hitch assembly for their 2004 Monaco Dynasty coach Diesel pusher The original hitch appears to have been cut off with a torch Any help on this would be greatly appreciated | Hey Bill, I wish...
What Causes Trailer Suspension Equalizers to not Sit Level
Hanger spacing for 2006 vortex 3950 5th wheel. Correct axle spacing please. Currently 29.5 front to 2nd hanger and 3rd to rear hanger space, and 33 center space. Axles tilt now when driving more tha photo. | The amount of tilt I see in the pictures...
Fifth Wheel Trailer to Gooseneck Hitch Adapter for Venture or Steelco/Davis Pin Box
I have a 2006 Thor Vortex 365WTB with a Trailair 21K kingpin box. My Silverado 3500 has an auxiliary fuel tank in the bed so I am limited on space. So I am resorting to use my B&W gooseneck ball. I am looking for a gooseneck box sort of like...
Trailer Suspension Kit Recommendation for Tandem Trailer Similar to APT5 but With 4.25 inch Hangers
Hello, I need a hanger kit just like APT5 except the hangers need to be 4.25inch from top to center of hole and the shackle straps need to be 2.25inch from center of hole to center of hole. Everything else is the same. Do you have such a kit?...
Replacements Needed For A 2007 Lippert 4,400 Pound Trailer Axle
I need the bearings and seals for Lippert 2007 4400lbs axle. Do you know the parts numbers? Thanks | We definitely have the replacements needed for your Lippert 4,400 pound axle. For the bearings, we do have what you need separately, but as...
Bolt Length of Hardware Kit for Double Eye Springs
On my equalizers it says Dexter 13105, the shank diameter on my bolt is 9/16 the leafspring is 1 3/4” , from shoulder of the bolthead to tip of the thread is 2 7/8” Thread diameter is 7/16 Will this kit fit what I got ?In the description it...
Filter Your Search
Contact and Help